PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE 90-30 Series PLC
- IC693PBM200-FE
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC693PBM200-FE PROFIBUS DP Master Module
IC693PBM200-FE is a PROFIBUS DP Master Module in the Series 90-30 family. It links a compatible Series 90-30 PLC to distributed PROFIBUS-DP devices.
The master exchanges configured slave I/O data and supports network synchronization through Sync and Freeze modes. Separate service and PROFIBUS connectors provide firmware servicing and fieldbus communication. The complete FE revision, CPU firmware and slave configuration must match the installed system.
The master exchanges configured slave I/O data and supports network synchronization through Sync and Freeze modes. Separate service and PROFIBUS connectors provide firmware servicing and fieldbus communication. The complete FE revision, CPU firmware and slave configuration must match the installed system.
BEFORE YOU BUY
Confirm the complete profibus dp master module
ACTUAL APPLICATIONS
Application context for IC693PBM200-FE
IC693PBM200-FE is a PROFIBUS DP Master Module for compatible Series 90-30 configurations. It suits water & wastewater, industrial manufacturing, chemical processing. Match the installed revision, interfaces and electrical ratings before use.
-
01 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Municipal Drinking Water TreatmentIndustrial Wastewater Treatment Processes -
02 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Industrial Production and AssemblyManufacturing Process Automation -
03 · CHEMICAL PROCESSING
Chemical Manufacturing and Process Production
Industrial Chemical ProductionChemical Processing and Formulation
Technical specifications for IC693PBM200-FE
-
Product ModelIC693PBM200-FE
-
Spare ModelIC693PBM200
-
Product ParametersPROFIBUS DP Master Module
-
In stock9 units
-
ManufacturerGeneral Electric
-
Slave station capacity125 maximum
-
Input bytes per slave244 maximum
-
Output bytes per slave244 maximum
-
Network data rates9.6/19.2/93.75/187.5/500 kbaud; 1.5/3/6/12 Mbaud
-
Backplane current450 mA at 5 V DC, typical
-
Operating temperature0 to 60℃
-
Storage temperature-40 to 85℃
-
CPU firmware requirement8.00 or later
-
Programming softwareProficy Machine Edition Logic Developer 2.6 or later
-
Service portRS-232; 9-pin male D-sub
-
PROFIBUS port9-pin female D-sub
-
Synchronization modesSync and Freeze
-
Status indicatorsSYS and COM
-
Permitted rack slotsAny Series 90-30 slot except slot 1 of the modular CPU baseplate
-
Type A copper segment limits1200 m at 9.6/19.2/93.75 kbaud; 1000 m at 187.5 kbaud; 400 m at 500 kbaud; 200 m at 1.5 Mbaud; 100 m at 3/6/12 Mbaud
View all additional
Alternative Names
IC693PBM200-FE
Series 90-30 PROFIBUS DP Master Module
90-30 125 maximum slave station capacity
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC693PBM200-FE profibus dp master module
IC693PBM200-FE belongs to the Series 90-30 platform and serves as a PROFIBUS DP Master Module. Match the complete article code and installed hardware revision before using the applicable manufacturer documentation.
The documented slave station capacity is 125 maximum; input bytes per slave is 244 maximum. Compare these requirements and the remaining electrical or interface ratings with the existing configuration. Confirm terminal allocation, compatible carriers or backplanes and power budget before connection.
Follow the applicable GE Fanuc GFK-2121A, Series 90-30 PROFIBUS Master User Manual instructions for IC693PBM200-FE. Verify configuration, communication or I/O response as appropriate to this profibus dp master module, and retain the final configuration and acceptance results with the asset record.
Features:
- Slave station capacity: 125 maximum
- Input bytes per slave: 244 maximum
- Output bytes per slave: 244 maximum
The IC693PBM200-FE profibus dp master module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC693PBM200-FE profibus dp master module
Replace IC693PBM200-FE only after matching its full article code, Series 90-30 role and documented hardware revision. Similar housings or related catalog numbers do not establish interchangeability; verify the relevant connections, electrical ratings and configuration requirements.
Before removing IC693PBM200-FE, record its label, connector positions, terminal assignments and existing configuration. Photograph adjacent modules, cable routing and grounding, isolate the applicable supplies and preserve any controller configuration needed for this profibus dp master module.
After fitting the verified IC693PBM200-FE article, restore the documented connections and configuration. Inspect status indications, check the affected I/O or communication path at a safe operating point and retain the acceptance record for the Series 90-30 installation.
Features:
- Slave station capacity: 125 maximum
- Input bytes per slave: 244 maximum
- Output bytes per slave: 244 maximum
The IC693PBM200-FE profibus dp master module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC693PBM200-FE profibus dp master module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.5 × 13.5 × 13.5cm
-
Shipping weight0.20kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC693PBM200-FE
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which slave station capacity is specified for IC693PBM200-FE?
For IC693PBM200-FE, slave station capacity is 125 maximum under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed Series 90-30 configuration. -
How is input bytes per slave defined for IC693PBM200-FE?
For IC693PBM200-FE, input bytes per slave is 244 maximum under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed Series 90-30 configuration. -
What value applies to IC693PBM200-FE for output bytes per slave?
For IC693PBM200-FE, output bytes per slave is 244 maximum under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed Series 90-30 configuration. -
What does the documentation state about network data rates on IC693PBM200-FE?
For IC693PBM200-FE, network data rates is 9.6/19.2/93.75/187.5/500 kbaud; 1.5/3/6/12 Mbaud under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed Series 90-30 configuration. -
For IC693PBM200-FE, what is the specified backplane current?
For IC693PBM200-FE, backplane current is 450 mA at 5 V DC, typical under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed Series 90-30 configuration. -
What is the documented operating temperature for IC693PBM200-FE?
For IC693PBM200-FE, operating temperature is 0 to 60℃ under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed Series 90-30 configuration. -
What purchase information is needed for IC693PBM200-FE profibus dp master module?
Specify IC693PBM200-FE in full, including every revision suffix, and verify the supplied article label, condition, included accessories and quotation. For this Series 90-30 item, related base numbers are not automatic substitutes. -
What should be documented when replacing IC693PBM200-FE profibus dp master module?
For IC693PBM200-FE, retain the label photographs, connection assignments, installed hardware revision and applicable Series 90-30 configuration. Restore these records and perform the documented functional checks after replacement.
READY TO VERIFY YOUR PART?
Get a IC693PBM200-FE quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
