PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC694MDL753B Thirty-two-point positive-logic DC output module, B revision
GE IC694MDL753B is a Thirty-two-point positive-logic DC output module, B revision for PACSystems RX3i. The manual specifies base catalog IC694MDL753; verify the IC694MDL753B revision against its label and applicable release notice. Discrete output points: 32, four groups of 8. Output logic: Positive / sourcing. Nominal output voltage: 12/24 V DC.
GFK-2314Z documents its RX3i installation, field wiring and electrical ratings. Output voltage range: 10.2–28.8 V DC. Output current per point: 0.5 A maximum. Check the complete suffix, terminals, available backplane power and controller project before replacement.
GFK-2314Z documents its RX3i installation, field wiring and electrical ratings. Output voltage range: 10.2–28.8 V DC. Output current per point: 0.5 A maximum. Check the complete suffix, terminals, available backplane power and controller project before replacement.
BEFORE YOU BUY
Confirm the complete thirty-two-point positive-logic dc output module, b revision
ACTUAL APPLICATIONS
Application context for IC694MDL753B
IC694MDL753B serves the documented RX3i Thirty-two-point positive-logic DC output module, B revision role across the three distinct industry areas below. Engineering teams should check the complete revision and operating context against the manufacturer manual.
-
01 · FOOD & BEVERAGE
Beverage Filling and Distribution
Beverage FillingBottled Drink Distribution -
02 · RENEWABLE ENERGY
Wind Farm and Solar Utility Services
Solar and Wind EnergyDistributed Energy and Storage -
03 · LOGISTICS & WAREHOUSING
Temperature-Controlled Logistics Services
Cold Chain LogisticsRefrigerated Warehousing
Technical specifications for IC694MDL753B
-
Product ModelIC694MDL753B
-
Product ParametersThirty-two-point positive-logic DC output module, B revision
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Discrete output points32, four groups of 8
-
Output logicPositive / sourcing
-
Nominal output voltage12/24 V DC
-
Output voltage range10.2–28.8 V DC
-
Output current per point0.5 A maximum
-
Output current per group4 A maximum
-
Current per group common pin3 A maximum
-
Field-to-backplane isolation250 V AC continuous; 1500 V AC for 1 minute
-
Group-to-group isolation50 V AC continuous; 500 V AC for 1 minute
-
Backplane 5 V draw260 mA maximum
-
User supply draw at 12 V9.6 mA per group maximum, all 8 outputs on
-
Inrush current5.4 A for 10 ms
-
On-state output drop0.3 V DC
-
Maximum off-state leakage0.1 mA
-
On/off response time0.5 ms maximum each
View all additional
Alternative Names
IC694MDL753B
GE RX3i Thirty-two-point positive-logic DC output module, B revision
IC694MDL753 Thirty-two-point positive-logic DC output module, B revision
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC694MDL753B thirty-two-point positive-logic dc output module, b revision
GFK-2314Z describes IC694MDL753 as a Thirty-two-point positive-logic DC output module, B revision in the PACSystems RX3i range. The manual specifies base catalog IC694MDL753; verify the IC694MDL753B revision against its label and applicable release notice. The documented discrete output points is 32, four groups of 8. Confirm the Universal Backplane position, CPU configuration and electrical interface before wiring.
The OEM specification gives output logic as Positive / sourcing and nominal output voltage as 12/24 V DC. Compare the complete terminal arrangement, supply loading and any mode selection with the stored controller project.
Commission the module in a controlled sequence: verify power and status LEDs, exercise each used channel or port, check fault responses and record the exact suffix and tested configuration.
Features:
- 32 sourcing DC outputs
- Four isolated groups of eight
- 0.5 A per output point
The IC694MDL753B thirty-two-point positive-logic dc output module, b revision requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC694MDL753B thirty-two-point positive-logic dc output module, b revision
Verify the full IC694MDL753B label before exchanging the installed RX3i article. GFK-2314Z documents IC694MDL753; a matching base without a checked revision does not establish identical compatibility.
Photograph the slot, front connector and field wiring, then record the project version and any selected mode. The replacement must match the documented discrete output points (32, four groups of 8) and output logic (Positive / sourcing).
After installation, confirm controller recognition, restore the approved settings, test every affected circuit or port and archive the checked result in the maintenance record.
Features:
- Two 24-pin field connectors
- Four isolated groups of eight
- 32 sourcing DC outputs
The IC694MDL753B thirty-two-point positive-logic dc output module, b revision requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC694MDL753B thirty-two-point positive-logic dc output module, b revision must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.6 × 13.4 × 13.7 cm
-
Shipping weight0.25 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC694MDL753B
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should IC694MDL753B be matched to an installed RX3i system?
Compare the full IC694MDL753B label, revision, backplane slot and field connections with the installed unit and GFK-2314Z. -
Can another revision of IC694MDL753 replace IC694MDL753B?
Do not assume a suffix swap. Review release notes, firmware or electrical changes and the approved controller configuration. -
What should maintenance capture before exchanging IC694MDL753B?
Save the project and record the complete nameplate, slot, wiring, power supply, status LEDs and any configured channels. -
What should be tested after fitting IC694MDL753B?
Check module recognition and status, then test each affected circuit or port with a known signal and document the final behavior. -
Which manufacturer document covers IC694MDL753B?
Use the IC694MDL753 chapter in the GE/Emerson PACSystems RX3i System Manual GFK-2314Z, plus any revision-specific release information. -
What should a distributor request to quote IC694MDL753B?
Request the complete catalog suffix, quantity, condition, destination and a clear nameplate image when revision matching matters. -
What should a buyer inspect when IC694MDL753B arrives?
Check the catalog and suffix, housing, connectors, contacts and quoted accessories before removing the current module. -
Where is IC694MDL753B installed?
The Thirty-two-point positive-logic DC output module, B revision is used in the documented PACSystems RX3i arrangement; confirm backplane compatibility and required power before installation.
READY TO VERIFY YOUR PART?
Get a IC694MDL753B quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC694MDL753BThirty-two-point positive-logic DC output module, B revisionManufacturer: General ElectricView Details
-
IC695ALG708-ECEight-channel current and voltage analog output moduleManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
