PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695HSC304 four-channel high-speed counter module
GE IC695HSC304 is a four-channel high-speed counter module documented for PACSystems RX3i motion and counting.
It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete four-channel high-speed counter module
ACTUAL APPLICATIONS
Where IC695HSC304 Fits in Mining, Water And Data Centers
Mining, water and data centers uses depend on installation compatibility, operating conditions and project requirements.
-
01 · MINING & MINERALS
Mineral Extraction, Aggregate Processing and Construction Materials
Mineral extraction and quarrying for construction aggregate supply chains.Aggregate processing for concrete and asphalt manufacturing supply chains. -
02 · WATER & WASTEWATER
Municipal Sewage Treatment and Industrial Effluent Processing
Municipal wastewater treatment for public sanitation and environmental protection.Industrial effluent treatment within regional wastewater collection service areas. -
03 · DATA CENTERS
Data Center Operations and Digital Infrastructure Management
Data center power management for continuous digital service delivery.Data center environmental management for reliable computing service operations.
Technical specifications for IC695HSC304
-
Product ModelIC695HSC304
-
Product Parametersfour-channel high-speed counter module
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Counter Channels1 to 4
-
High-Speed Inputs8
-
High-Speed Outputs7
-
Maximum Input Rate1.5 MHz
-
Counter TypesA, B, C, D, E and Z
-
BackplaneRX3i universal
-
Hot InsertionSupported
-
Terminal BlockIC694TBB/TBS 032 or 132
-
CPU Firmware3.81 or later
-
Configuration SoftwareMachine Edition 5.50 SP2 SIM 3 or later
View all additional
Alternative Names
IC695HSC304
PACSystems RX3i motion and counting four-channel high-speed counter module
GE four-channel high-speed counter module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match IC695HSC304 to the installed PACSystems RX3i motion and counting
GE IC695HSC304 is a four-channel high-speed counter module for the PACSystems RX3i motion and counting. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare maximum input rate (1.5 MHz), counter types (A, B, C, D, E and Z) and backplane (RX3i universal) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: IC695HSC304
- Product class: four-channel high-speed counter module
- Family: PACSystems RX3i motion and counting
The GE IC695HSC304 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete IC695HSC304 identity before exchange
Replace IC695HSC304 only after matching the complete article code, four-channel high-speed counter module, installed PACSystems RX3i motion and counting role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: IC695HSC304
- Product class: four-channel high-speed counter module
- Family check: PACSystems RX3i motion and counting
The GE IC695HSC304 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for IC695HSC304
- GE PACSystems RX3i motion and counting references reviewed
- Exact GE identity required before service
Documentation for GE IC695HSC304 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20 × 15 × 8 cm
-
Shipping weight0.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695HSC304
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Plant retrofit: verify IC695HSC304 against counter channels
For IC695HSC304 during retrofit planning, a plant technician should match counter channels (1 to 4) and high-speed inputs (8) to the installed PACSystems RX3i motion and counting design. A mismatch can prevent correct integration even when the hardware appears similar. -
Plant retrofit decision: keep or replace IC695HSC304?
For retrofit planning, identify IC695HSC304 by the combined specification: high-speed inputs is 8, while high-speed outputs is 7. A plant technician should confirm both values rather than relying on the family name or enclosure. -
Plant retrofit: order IC695HSC304 by high-speed outputs
Before wiring or mounting IC695HSC304, a plant technician should verify the installation supports high-speed outputs of 7 and preserves the documented maximum input rate of 1.5 MHz. Record this check in the retrofit planning work pack. -
IC695HSC304 setup: maximum input rate at 1.5 MHz — plant retrofit?
During retrofit planning, a plant technician should commission IC695HSC304 under a controlled load or signal and confirm maximum input rate reaches 1.5 MHz. Cross-check counter types against A, B, C, D, E and Z, then save the measured result for engineering acceptance. -
Why IC695HSC304 uses A, B, C, D for counter types — plant retrofit
During retrofit planning, a plant technician should isolate the circuit, compare the actual counter types with the IC695HSC304 specification of A, B, C, D, E and Z, and inspect the related backplane requirement (RX3i universal). This separates a module fault from a supply, wiring, or configuration issue. -
Does IC695HSC304 meet the backplane requirement in plant retrofit?
For retrofit planning, the IC695HSC304 service record should state backplane as RX3i universal and retain hot insertion at Supported. These values give a plant technician a repeatable baseline for later replacement and fault diagnosis. -
What makes IC695HSC304 fit the distributor plant retrofit task?
For a plant technician's retrofit planning request, the quotation should identify the complete IC695HSC304 code and confirm hot insertion (Supported) together with terminal block (IC694TBB/TBS 032 or 132). The distributor should flag any revision or substitute that changes either requirement. -
Receiving IC695HSC304 for MRO plant retrofit: check IC694TBB/TBS 032 or 132 terminal block
For a plant technician's retrofit planning requirement, check the delivered IC695HSC304 label and order code, then verify terminal block is IC694TBB/TBS 032 or 132 and counter channels is 1 to 4. Photograph the label and connectors before acceptance so purchasing and maintenance share the same identity record.
READY TO VERIFY YOUR PART?
Get a IC695HSC304 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC695HSC304four-channel high-speed counter moduleManufacturer: General ElectricView Details
-
IC694BEM331Genius bus controller moduleManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
