PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC694ALG442 Mixed Analog I/O Module
IC694ALG442 is a Mixed Analog I/O Module in the PACSystems RX3i family. It combines four analog inputs and two analog outputs for compatible RX3i process signal connections.
The module supports channel-configured current and voltage ranges, with 12-bit input conversion and 16-bit output conversion. A 20-screw terminal block carries field connections, and separate backplane and isolated field power support module operation. This ALG442 version does not provide the advanced diagnostics of ALG542.
The module supports channel-configured current and voltage ranges, with 12-bit input conversion and 16-bit output conversion. A 20-screw terminal block carries field connections, and separate backplane and isolated field power support module operation. This ALG442 version does not provide the advanced diagnostics of ALG542.
BEFORE YOU BUY
Confirm the complete mixed analog i/o module
ACTUAL APPLICATIONS
Application context for IC694ALG442
IC694ALG442 is a Mixed Analog I/O Module for compatible PACSystems RX3i configurations. It suits industrial manufacturing, food & beverage, water & wastewater. Match the installed revision, interfaces and electrical ratings before use.
-
01 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Industrial Production and AssemblyManufacturing Process Automation -
02 · FOOD & BEVERAGE
Food Manufacturing and Beverage Processing
Food Processing and PackagingBeverage Production and Bottling -
03 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Municipal Drinking Water TreatmentIndustrial Wastewater Treatment Processes
Technical specifications for IC694ALG442
-
Product ModelIC694ALG442
-
Product ParametersMixed Analog I/O Module
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Analog input channels4
-
Analog output channels2
-
Input voltage ranges0 to 10 V; -10 to +10 V
-
Input current ranges0 to 20 mA; 4 to 20 mA
-
Input resolution12 bit
-
Output resolution16 bit
-
Module update rate2 ms for all channels
-
Current input impedance250 ohm
-
Voltage input impedance800 kohm
-
Input filter response38 Hz
-
Input accuracy±0.25% of full scale at 25℃
-
Current output accuracy±0.1% of full scale at 25℃
-
Voltage output load5 mA maximum; 2 kohm minimum
-
Backplane current95 mA at 5 V DC
-
Field supply current150 mA at isolated 24 V DC
View all additional
Alternative Names
IC694ALG442
PACSystems RX3i Mixed Analog I/O Module
RX3i 4 analog input channels
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC694ALG442 mixed analog i/o module
IC694ALG442 belongs to the PACSystems RX3i platform and serves as a Mixed Analog I/O Module. Match the complete article code and installed hardware revision before using the applicable manufacturer documentation.
The documented analog input channels is 4; analog output channels is 2. Compare these requirements and the remaining electrical or interface ratings with the existing configuration. Confirm terminal allocation, compatible carriers or backplanes and power budget before connection.
Follow the applicable GE Intelligent Platforms PACSystems RX3i catalog, Analog Mixed I/O Modules, page 1.31 instructions for IC694ALG442. Verify configuration, communication or I/O response as appropriate to this mixed analog i/o module, and retain the final configuration and acceptance results with the asset record.
Features:
- Analog input channels: 4
- Analog output channels: 2
- Input voltage ranges: 0 to 10 V; -10 to +10 V
The IC694ALG442 mixed analog i/o module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC694ALG442 mixed analog i/o module
Replace IC694ALG442 only after matching its full article code, PACSystems RX3i role and documented hardware revision. Similar housings or related catalog numbers do not establish interchangeability; verify the relevant connections, electrical ratings and configuration requirements.
Before removing IC694ALG442, record its label, connector positions, terminal assignments and existing configuration. Photograph adjacent modules, cable routing and grounding, isolate the applicable supplies and preserve any controller configuration needed for this mixed analog i/o module.
After fitting the verified IC694ALG442 article, restore the documented connections and configuration. Inspect status indications, check the affected I/O or communication path at a safe operating point and retain the acceptance record for the PACSystems RX3i installation.
Features:
- Analog input channels: 4
- Analog output channels: 2
- Input voltage ranges: 0 to 10 V; -10 to +10 V
The IC694ALG442 mixed analog i/o module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC694ALG442 mixed analog i/o module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.5 × 13.2 × 13.5cm
-
Shipping weight0.28kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC694ALG442
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What value applies to IC694ALG442 for analog input channels?
For IC694ALG442, analog input channels is 4 under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What does the documentation state about analog output channels on IC694ALG442?
For IC694ALG442, analog output channels is 2 under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
For IC694ALG442, what is the specified input voltage ranges?
For IC694ALG442, input voltage ranges is 0 to 10 V; -10 to +10 V under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What is the documented input current ranges for IC694ALG442?
For IC694ALG442, input current ranges is 0 to 20 mA; 4 to 20 mA under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
Which input resolution is specified for IC694ALG442?
For IC694ALG442, input resolution is 12 bit under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
How is output resolution defined for IC694ALG442?
For IC694ALG442, output resolution is 16 bit under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
Which procurement checks apply to IC694ALG442 mixed analog i/o module?
Specify IC694ALG442 in full, including every revision suffix, and verify the supplied article label, condition, included accessories and quotation. For this PACSystems RX3i item, related base numbers are not automatic substitutes. -
What information should be preserved before removing IC694ALG442 mixed analog i/o module?
For IC694ALG442, retain the label photographs, connection assignments, installed hardware revision and applicable PACSystems RX3i configuration. Restore these records and perform the documented functional checks after replacement.
READY TO VERIFY YOUR PART?
Get a IC694ALG442 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
