PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695CMU310 RX3i Max-ON hot-standby redundancy CPU
GE IC695CMU310 is a RX3i Max-ON hot-standby redundancy CPU in the GE PACSystems RX3i range. Controller role: Max-ON hot-standby redundancy CPU. Redundancy arrangement: Two RX3i controllers. Data exchange: One or two dedicated Ethernet LANs.
The manufacturer's document records its interface and service limits. Control transfer: Two to three CPU logic scans. User RAM: 10 MB battery-backed. Before installation, compare the complete catalog code, installed connections and controller configuration.
The manufacturer's document records its interface and service limits. Control transfer: Two to three CPU logic scans. User RAM: 10 MB battery-backed. Before installation, compare the complete catalog code, installed connections and controller configuration.
BEFORE YOU BUY
Confirm the complete rx3i max-on hot-standby redundancy cpu
ACTUAL APPLICATIONS
Application context for IC695CMU310
IC695CMU310 serves the documented GE PACSystems RX3i role in the industry areas below. The manufacturer's guide describes controller role as Max-ON hot-standby redundancy CPU and redundancy arrangement as Two RX3i controllers. Verify the installed configuration for the particular application.
-
01 · POWER GENERATION
Reserve Power and Grid Continuity
Reserve Power GenerationGrid Continuity Services -
02 · OIL & GAS
Fuel Transfer and Storage Operations
Fuel Storage and DistributionIndustrial Energy Supply -
03 · DISTRICT ENERGY
Industrial Boiler and Steam Services
Industrial Steam GenerationBoiler House Utilities
Technical specifications for IC695CMU310
-
Product ModelIC695CMU310
-
Product ParametersRX3i Max-ON hot-standby redundancy CPU
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Controller roleMax-ON hot-standby redundancy CPU
-
Redundancy arrangementTwo RX3i controllers
-
Data exchangeOne or two dedicated Ethernet LANs
-
Control transferTwo to three CPU logic scans
-
User RAM10 MB battery-backed
-
User flash10 MB non-volatile
-
3.3 V supply draw1.25 A nominal
-
5 V supply draw1.0 A nominal
-
Operating temperature0–60 °C
-
Boolean execution0.195 ms per 1000 Boolean instructions, typical
-
Serial interfacesRS-232 and RS-485
-
Serial protocolsModbus RTU Slave, SNP and Serial I/O
-
Program blocksUp to 512
-
Maximum program block128 KB
-
Clock drift2 seconds per day maximum
View all additional
Alternative Names
IC695CMU310
GE PACSystems RX3i RX3i Max-ON hot-standby redundancy CPU
IC695CMU310 RX3i Max-ON hot-standby redundancy CPU
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC695CMU310 rx3i max-on hot-standby redundancy cpu
The manufacturer source documents IC695CMU310 for GE PACSystems RX3i. It describes controller role as Max-ON hot-standby redundancy CPU. Match the controller assembly, slot or network identity and available power before connection.
Use the documented interface and connection arrangement. Redundancy arrangement is Two RX3i controllers; data exchange is One or two dedicated Ethernet LANs. Check all field conductors, configuration and external supply against the installed project.
At startup, review power and status indications, test every affected channel, port or function in sequence, then record the verified settings and exact installed revision for future maintenance.
Features:
- Hot-standby CPU redundancy
- Two-controller arrangement
- One or two dedicated Ethernet LANs
The IC695CMU310 rx3i max-on hot-standby redundancy cpu requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC695CMU310 rx3i max-on hot-standby redundancy cpu
Verify the full IC695CMU310 marking, including its suffix, before removing the installed unit. A base manual for IC695CMU310 must be read with any applicable revision information and the current hardware configuration.
Preserve the project and photograph wiring, connector assignments, slot position and indicators. Compare the replacement's controller role (Max-ON hot-standby redundancy CPU) and redundancy arrangement (Two RX3i controllers) with the service record.
After the change, restore the approved setup, confirm controller recognition and test affected signals or communications. Record the final nameplate and validation results.
Features:
- I/O state retention during switchover
- Hot-standby CPU redundancy
- One or two dedicated Ethernet LANs
The IC695CMU310 rx3i max-on hot-standby redundancy cpu requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC695CMU310 rx3i max-on hot-standby redundancy cpu must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size7 × 13.4 × 13.7 cm
-
Shipping weight0.44 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695CMU310
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should IC695CMU310 be checked before ordering?
Compare the full catalog and suffix with the installed label, GE PACSystems RX3i assembly and manufacturer document. -
Can another revision of IC695CMU310 replace IC695CMU310?
Do not infer interchangeability from the shared base number. Check applicable release notes, firmware and project compatibility. -
What should engineers record before exchanging IC695CMU310?
Save the approved project and record the slot, full nameplate, connector or terminal assignments, supply and current diagnostics. -
How should IC695CMU310 be tested after installation?
Confirm controller recognition and status, exercise each affected function with a known condition, and archive the measured outcome. -
Which manual covers IC695CMU310?
The linked manufacturer document covers base article IC695CMU310. Verify the particular IC695CMU310 suffix against the delivered module. -
What does a distributor need to quote IC695CMU310?
Send the complete order code, quantity, condition, delivery country and a legible label photo if revision matching is critical. -
How should incoming IC695CMU310 be inspected?
Compare the full label and condition against the quotation; inspect contacts, housing and included accessories before installation. -
What should be checked if IC695CMU310 is not recognized?
Confirm the correct slot or network position, supply, bus or firmware compatibility and project configuration before replacing other hardware.
READY TO VERIFY YOUR PART?
Get a IC695CMU310 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC695CMU310RX3i Max-ON hot-standby redundancy CPUManufacturer: General ElectricView Details
-
IC694PWR321BAC/DC standard power supplyManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
