PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC694TBB032E Box Style Screw Terminal Block
IC694TBB032E is a Box Style Screw Terminal Block in the PACSystems RX3i family. It provides removable field wiring termination for compatible high-density RX3i I/O modules.
The assembly uses thirty-six box-style screw terminals in a standard-depth cover. Prepared solid or stranded conductors are clamped by the terminal screws, and a latch secures the assembly to the I/O module. Terminal assignments are determined by the connected module rather than the terminal block alone.
The assembly uses thirty-six box-style screw terminals in a standard-depth cover. Prepared solid or stranded conductors are clamped by the terminal screws, and a latch secures the assembly to the I/O module. Terminal assignments are determined by the connected module rather than the terminal block alone.
BEFORE YOU BUY
Confirm the complete box style screw terminal block
ACTUAL APPLICATIONS
Application context for IC694TBB032E
IC694TBB032E is a Box Style Screw Terminal Block for compatible PACSystems RX3i configurations. It suits industrial manufacturing, food & beverage, water & wastewater. Match the installed revision, interfaces and electrical ratings before use.
-
01 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Industrial Production and AssemblyManufacturing Process Automation -
02 · FOOD & BEVERAGE
Food Manufacturing and Beverage Processing
Food Processing and PackagingBeverage Production and Bottling -
03 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Municipal Drinking Water TreatmentIndustrial Wastewater Treatment Processes
Technical specifications for IC694TBB032E
-
Product ModelIC694TBB032E
-
Product ParametersBox Style Screw Terminal Block
-
In stock3 units
-
ManufacturerGeneral Electric
-
Terminal count36
-
Termination methodBox-style screw clamp
-
Terminal tightening torque0.79 Nm
-
Wire strip length7.87 mm
-
Supported wire gauge14 to 26 AWG
-
Conductor formsSolid or stranded
-
Cover depthStandard
-
Mounting interfaceDirect module-mounted high-density RX3i I/O
View all additional
Alternative Names
IC694TBB032E
PACSystems RX3i Box Style Screw Terminal Block
RX3i 36 terminal count
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC694TBB032E box style screw terminal block
IC694TBB032E belongs to the PACSystems RX3i platform and serves as a Box Style Screw Terminal Block. Match the complete article code and installed hardware revision before using the applicable manufacturer documentation.
The documented terminal count is 36; termination method is Box-style screw clamp. Compare these requirements and the remaining electrical or interface ratings with the existing configuration. Confirm terminal allocation, compatible carriers or backplanes and power budget before connection.
Follow the applicable Emerson GFK-2314V, section 17.1, high-density terminal blocks instructions for IC694TBB032E. Verify configuration, communication or I/O response as appropriate to this box style screw terminal block, and retain the final configuration and acceptance results with the asset record.
Features:
- Terminal count: 36
- Termination method: Box-style screw clamp
- Terminal tightening torque: 0.79 Nm
The IC694TBB032E box style screw terminal block requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC694TBB032E box style screw terminal block
Replace IC694TBB032E only after matching its full article code, PACSystems RX3i role and documented hardware revision. Similar housings or related catalog numbers do not establish interchangeability; verify the relevant connections, electrical ratings and configuration requirements.
Before removing IC694TBB032E, record its label, connector positions, terminal assignments and existing configuration. Photograph adjacent modules, cable routing and grounding, isolate the applicable supplies and preserve any controller configuration needed for this box style screw terminal block.
After fitting the verified IC694TBB032E article, restore the documented connections and configuration. Inspect status indications, check the affected I/O or communication path at a safe operating point and retain the acceptance record for the PACSystems RX3i installation.
Features:
- Terminal count: 36
- Termination method: Box-style screw clamp
- Terminal tightening torque: 0.79 Nm
The IC694TBB032E box style screw terminal block requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC694TBB032E box style screw terminal block must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.3 × 4.4 × 11.1cm
-
Shipping weight0.14kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC694TBB032E
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What value applies to IC694TBB032E for terminal count?
For IC694TBB032E, terminal count is 36 under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What does the documentation state about termination method on IC694TBB032E?
For IC694TBB032E, termination method is Box-style screw clamp under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
For IC694TBB032E, what is the specified terminal tightening torque?
For IC694TBB032E, terminal tightening torque is 0.79 Nm under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What is the documented wire strip length for IC694TBB032E?
For IC694TBB032E, wire strip length is 7.87 mm under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
Which supported wire gauge is specified for IC694TBB032E?
For IC694TBB032E, supported wire gauge is 14 to 26 AWG under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
How is conductor forms defined for IC694TBB032E?
For IC694TBB032E, conductor forms is Solid or stranded under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
Which procurement checks apply to IC694TBB032E box style screw terminal block?
Specify IC694TBB032E in full, including every revision suffix, and verify the supplied article label, condition, included accessories and quotation. For this PACSystems RX3i item, related base numbers are not automatic substitutes. -
What information should be preserved before removing IC694TBB032E box style screw terminal block?
For IC694TBB032E, retain the label photographs, connection assignments, installed hardware revision and applicable PACSystems RX3i configuration. Restore these records and perform the documented functional checks after replacement.
READY TO VERIFY YOUR PART?
Get a IC694TBB032E quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
