PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE PACSystems RX3i
- IC695CHS012-CA
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695CHS012-CA 12-Slot Universal Backplane
IC695CHS012-CA is a 12-slot universal backplane for GE PACSystems RX3i controllers. It provides the module connections and power distribution needed for a compatible RX3i main rack.
The dual-bus backplane supports documented PCI-based and serial modules, including supported Series 90-30 I/O. It includes an isolated 24 V input terminal strip, grounding provisions and a serial expansion connector. Horizontal mounting and cooling clearance are required. The CA revision records hardware changes for EU-RoHS compliance in the manufacturer release history; it is not a conformal-coating designation.
The dual-bus backplane supports documented PCI-based and serial modules, including supported Series 90-30 I/O. It includes an isolated 24 V input terminal strip, grounding provisions and a serial expansion connector. Horizontal mounting and cooling clearance are required. The CA revision records hardware changes for EU-RoHS compliance in the manufacturer release history; it is not a conformal-coating designation.
BEFORE YOU BUY
Confirm the complete 12-slot universal backplane
ACTUAL APPLICATIONS
Application context for IC695CHS012-CA
IC695CHS012-CA supports compatible RX3i main-rack configurations for industrial manufacturing, energy production and water treatment. Module selection, power-supply position, bus compatibility and the enclosure cooling arrangement determine the configured system scope.
-
01 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Automated Manufacturing and ProductionFactory Production and Assembly -
02 · POWER GENERATION
Electric Power and Energy Generation
Thermal Power and Electricity GenerationIndustrial Energy Production Processes -
03 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Drinking Water Treatment ProcessesMunicipal Wastewater Treatment Processes
Technical specifications for IC695CHS012-CA
-
Product ModelIC695CHS012-CA
-
Product Parameters12-Slot Universal Backplane
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Module slots12
-
Backplane busesPCI-based and serial
-
Supported I/O interfacesIC695 PCI, IC694 serial and supported Series 90-30 modules
-
External isolated supply input+24 V DC
-
External supply terminal strip8 positions, TB1
-
Expansion interface1 serial expansion connector
-
Shield groundingIntegral grounding bar
-
Module slot 0Power supply only
-
Cooling clearance102 mm minimum on all sides
-
Mounting orientationHorizontal
-
Minimum protective enclosureNEMA/UL Type 1 or IP20
View all additional
Alternative Names
IC695CHS012-CA
PACSystems RX3i 12-Slot Universal Backplane
RX3i 12 module slots
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC695CHS012-CA 12-slot universal backplane
IC695CHS012-CA is a 12-slot universal backplane in the PACSystems RX3i platform. Match the exact article and hardware revision to the installed backplane and controller configuration before allocating channels, connections or network resources.
Compare module slots (12), backplane buses (PCI-based and serial) and supported i/o interfaces (IC695 PCI, IC694 serial and supported Series 90-30 modules) with the project requirements. Use the applicable terminal assignments, power budget and grounding requirements from the manufacturer documentation.
Configure the supported operating modes for IC695CHS012-CA, then verify the affected signals or communications in the approved controller project. Record configuration changes, diagnostic results and the completed functional checks with the equipment record.
Features:
- Module slots: 12
- Backplane buses: PCI-based and serial
- Supported I/O interfaces: IC695 PCI, IC694 serial and supported Series 90-30 modules
The IC695CHS012-CA 12-slot universal backplane requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC695CHS012-CA 12-slot universal backplane
Replace IC695CHS012-CA after comparing the complete label, hardware revision and PACSystems RX3i role with the installed article. Confirm connector allocation and the supported controller configuration before exchanging the module.
Preserve the controller project and relevant channel or communication settings before removing IC695CHS012-CA. Photograph field connections and grounding, identify connected circuits, and isolate the required power supplies according to the manufacturer procedure.
Restore the approved configuration after fitting IC695CHS012-CA. Check module status indications, the affected I/O or network connections and the required operating responses, then retain the replacement identity and final acceptance results.
Features:
- Module slots: 12
- Backplane buses: PCI-based and serial
- Supported I/O interfaces: IC695 PCI, IC694 serial and supported Series 90-30 modules
The IC695CHS012-CA 12-slot universal backplane requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC695CHS012-CA 12-slot universal backplane must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size46 × 14 × 2cm
-
Shipping weight1.58kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695CHS012-CA
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many module slots does the CHS012 universal backplane provide?
It is the twelve-slot RX3i universal backplane. -
Which two buses are present on the universal main backplane?
It provides a PCI-based bus and a serial bus for the documented compatible modules. -
Can a CPU be assigned to slot 0 on this backplane?
No. Slot 0 is reserved for a power supply. -
What external voltage connection is provided at the left terminal strip?
The terminal strip accepts the documented isolated +24 V input. -
How much space is required around the universal rack for cooling?
The manufacturer requires at least 102 mm on all sides, with additional space when the heat load requires it. -
Does the CA backplane suffix mean conformal coating?
No. The cited release history identifies CA as hardware changes for EU-RoHS compliance. -
Which rack allocation is needed for a CHS012-CA purchasing request?
Provide the complete article, planned CPU and power-supply positions, module list and expansion requirements. -
What mechanical features should be checked when receiving the universal backplane?
Inspect the CA label, bus contacts, terminal strip, grounding bar and mounting points against the approved order.
READY TO VERIFY YOUR PART?
Get a IC695CHS012-CA quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
