PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695CHS007 7-slot universal backplane
GE IC695CHS007 is a 7-slot universal backplane in the PACSystems RX3i backplanes. It is used to perform the documented 7-slot universal backplane function in the installed automation equipment.
Its documented configuration includes module slots of 7, backplane type of Universal PCI and serial, power supply slot of Slot 0, and i/o slots of 6 usable slots. During operation, the 7-slot universal backplane performs its assigned 7-slot universal backplane function through the documented power, signal and communication interfaces.
Its documented configuration includes module slots of 7, backplane type of Universal PCI and serial, power supply slot of Slot 0, and i/o slots of 6 usable slots. During operation, the 7-slot universal backplane performs its assigned 7-slot universal backplane function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete 7-slot universal backplane
ACTUAL APPLICATIONS
Where IC695CHS007 Fits in Mining, Beverages And Data Centers
Mining, beverages and data centers uses depend on installation compatibility, operating conditions and project requirements.
-
01 · MINING & MINERALS
Mineral Extraction, Aggregate Processing and Construction Materials
Mineral extraction and quarrying for construction aggregate supply chains.Aggregate processing for concrete and asphalt manufacturing supply chains. -
02 · FOOD & BEVERAGE
Beverage Production, Commercial Bottling and Product Packaging
Beverage bottling and filling within commercial wine production operations.Beverage packaging and labeling for commercial product distribution channels. -
03 · DATA CENTERS
Data Center Operations and Digital Infrastructure Management
Data center power management for continuous digital service delivery.Data center environmental management for reliable computing service operations.
Technical specifications for IC695CHS007
-
Product ModelIC695CHS007
-
Product Parameters7-slot universal backplane
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Module Slots7
-
Backplane TypeUniversal PCI and serial
-
Power Supply SlotSlot 0
-
I/O Slots6 usable slots
-
Module BusHigh-speed PCI plus serial
-
Internal Current at 3.3 V600 mA
-
Internal Current at 5 V240 mA
-
Isolated Input24 V DC terminal
-
MountingPanel mount
-
Controller PlatformPACSystems RX3i
View all additional
Alternative Names
IC695CHS007
PACSystems RX3i backplanes 7-slot universal backplane
GE 7-slot universal backplane
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match IC695CHS007 to the installed PACSystems RX3i backplanes
GE IC695CHS007 is a 7-slot universal backplane for the PACSystems RX3i backplanes. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare i/o slots (6 usable slots), module bus (High-speed PCI plus serial) and internal current at 3.3 v (600 mA) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: IC695CHS007
- Product class: 7-slot universal backplane
- Family: PACSystems RX3i backplanes
The GE IC695CHS007 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete IC695CHS007 identity before exchange
Replace IC695CHS007 only after matching the complete article code, 7-slot universal backplane, installed PACSystems RX3i backplanes role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: IC695CHS007
- Product class: 7-slot universal backplane
- Family check: PACSystems RX3i backplanes
The GE IC695CHS007 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for IC695CHS007
- GE PACSystems RX3i backplanes references reviewed
- Exact GE identity required before service
Documentation for GE IC695CHS007 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size55 × 30 × 12 cm
-
Shipping weight2.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695CHS007
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How do I identify the correct IC695CHS007?
Confirm the complete IC695CHS007 nameplate, manufacturer, hardware revision and PACSystems RX3i backplanes system context. -
What should be checked before replacing IC695CHS007?
Compare the documented electrical ratings, signal or network interfaces, firmware and companion equipment for this 7-slot universal backplane. -
Can a similar PACSystems RX3i backplanes article replace IC695CHS007?
Only after the complete article code, channel or port configuration, ratings and engineering configuration are confirmed. -
What records should be saved before removal?
Photograph connectors and labels, then save the relevant program, parameters, addresses and diagnostic state. -
How should IC695CHS007 be inspected on receipt?
Check the exact label, housing, terminals, keyed connectors and signs of transport or storage damage. -
Which commissioning checks apply to IC695CHS007?
Verify supply and wiring, restore the approved configuration, review diagnostics and perform a controlled functional test. -
What information is needed for a quotation?
Provide IC695CHS007, quantity, clear nameplate photos and the installed PACSystems RX3i backplanes configuration. -
What service evidence should be retained?
Keep the connection record, parameter backup, measurements, diagnostic results and final acceptance record.
READY TO VERIFY YOUR PART?
Get a IC695CHS007 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC695CHS0077-slot universal backplaneManufacturer: General ElectricView Details
-
IC695CPU310300 MHz PACSystems RX3i CPUManufacturer: General ElectricView Details -
Manufacturer: bachmannView Details -
DPM200ProfiBus DP Master ModuleManufacturer: bachmannView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
