PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE PACSystems RX3i
- IC695CRU320-EL
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695CRU320-EL Redundant RX3i controller
GE IC695CRU320-EL is a PACSystems RX3i high-availability controller with a 1 GHz processor and 64 MB user memory. It is designed for a redundant CPU arrangement using the specified IC695RMX128 synchronization module.
The controller supports redundancy transfers up to 2 MB at the beginning and end of scan. Its documented switchover is limited to one logic scan, with a minimum of 3.133 ms, and its communication interfaces include one RS-485 and one RS-232 port.
The controller supports redundancy transfers up to 2 MB at the beginning and end of scan. Its documented switchover is limited to one logic scan, with a minimum of 3.133 ms, and its communication interfaces include one RS-485 and one RS-232 port.
BEFORE YOU BUY
Confirm the complete redundant rx3i controller
ACTUAL APPLICATIONS
Application context for IC695CRU320-EL
IC695CRU320-EL supports compatible PACSystems RX3i High Availability installations across the application categories below, subject to system configuration.
-
01 · OIL & GAS
Petroleum Exploration and Natural Gas Transmission
Offshore Petroleum DevelopmentCross-Regional Gas Transmission -
02 · POWER GENERATION
Thermal Electricity and Hydroelectric Power Generation
Combined-Cycle Power GenerationPumped-Storage Hydropower -
03 · WATER & WASTEWATER
Municipal Water Supply and Industrial Wastewater Treatment
Drinking Water TreatmentWastewater Resource Recovery
Technical specifications for IC695CRU320-EL
-
Product ModelIC695CRU320-EL
-
Product ParametersRedundant RX3i controller
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Processor speed1 GHz
-
User memory64 MB
-
Boolean execution0.047 ms per 1K instructions
-
Discrete I/O capacity32K points
-
Analog I/O capacity32K points
-
Redundancy transferUp to 2 MB at beginning and end of scan
-
SwitchoverOne logic scan maximum; 3.133 ms minimum
-
Serial portsOne RS-485 and one RS-232
-
Local racks8 maximum
-
Memory storageSRAM and flash
-
Required sync moduleIC695RMX128
-
3.3 V backplane current1.75 A
-
5 V backplane current1.20 A
View all additional
Alternative Names
IC695CRU320-EL
PACSystems RX3i High Availability redundant RX3i controller
RX3i High Availability Bumpless high-availability redundant CPU controller role
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC695CRU320-EL redundant rx3i controller
IC695CRU320-EL provides the documented function of a redundant RX3i controller in the PACSystems RX3i High Availability platform. Match the complete article and revision with the host architecture before engineering approval.
Review controller role (Bumpless high-availability redundant CPU), processor speed (1 GHz) and user memory (64 MB) against the electrical and functional design.
Apply the documented connection and supply limits, validate boolean execution (0.047 ms per 1K instructions) and retain the completed test record with the system documentation.
Features:
- Confirm controller role: Bumpless high-availability redundant CPU
- Match processor speed: 1 GHz
- Validate user memory: 64 MB
The IC695CRU320-EL redundant rx3i controller requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC695CRU320-EL redundant rx3i controller
Record the full IC695CRU320-EL identity, installed revision, wiring and configuration before removal. Isolate the applicable power and field circuits under the site maintenance procedure.
Compare the replacement article's discrete i/o capacity (32K points) and analog i/o capacity (32K points) with the removed unit and purchase record.
After installation, inspect connection integrity, confirm redundancy transfer (Up to 2 MB at beginning and end of scan) and verify switchover (One logic scan maximum; 3.133 ms minimum) before return to service.
Features:
- Record discrete i/o capacity: 32K points
- Inspect analog i/o capacity: 32K points
- Test switchover: One logic scan maximum; 3.133 ms minimum
The IC695CRU320-EL redundant rx3i controller requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC695CRU320-EL redundant rx3i controller must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size7.0 x 13.5 x 13.7 cm
-
Shipping weight0.66 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695CRU320-EL
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can IC695CRU320-EL form a redundant pair without an RMX module?
IC695CRU320-EL requires the documented IC695RMX128 synchronization module for its high-availability arrangement. Check the complete pair architecture. -
What does the bumpless switchover rating mean for IC695CRU320-EL?
The documented IC695CRU320-EL switchover limit is one logic scan, with a minimum of 3.133 ms. Evaluate that rating against the actual application and redundancy configuration. -
How much data can IC695CRU320-EL synchronize at scan boundaries?
IC695CRU320-EL supports up to 2 MB of redundancy transfer at the beginning and end of scan. Review synchronized data size and scan effects in the project. -
Can a CPU320 replace the standby IC695CRU320-EL just by matching processor speed?
IC695CRU320-EL is a CRU320 high-availability CPU. A matching 1 GHz speed does not establish the redundancy capability or pairing requirements of another controller. -
Which rack current figures apply to IC695CRU320-EL?
Include 1.75 A at 3.3 V and 1.20 A at 5 V for IC695CRU320-EL, together with synchronization and other rack modules. -
What should be validated before returning a replaced IC695CRU320-EL pair to service?
Verify synchronization, active/standby roles, transferred application data and a controlled switchover for IC695CRU320-EL under the approved system test procedure. -
What redundancy details belong in a IC695CRU320-EL purchase specification?
Provide the full EL-suffix IC695CRU320-EL, partner-controller identification, synchronization module and project revision so the high-availability spare can be matched. -
How should the EL revision be checked when IC695CRU320-EL arrives?
Compare the complete IC695CRU320-EL label with the order and installed pair, and inspect the serial and backplane connections before configuration.
READY TO VERIFY YOUR PART?
Get a IC695CRU320-EL quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC695CRU320-ELRedundant RX3i controllerManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
