PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695PNC001LT PROFINET I/O Controller
IC695PNC001LT is a PROFINET I/O controller in the GE PACSystems RX3i family. It connects a compatible RX3i controller to configured PROFINET I/O devices for distributed industrial automation.
The controller provides two RJ45 network connections and two SFP cages for supported copper or optical links. Configured I/O data is exchanged between the RX3i CPU and the PROFINET network, with selectable update intervals and module status data. Media redundancy and other network functions depend on the hardware, firmware, CPU and project configuration; the complete LT article must be matched before replacement.
The controller provides two RJ45 network connections and two SFP cages for supported copper or optical links. Configured I/O data is exchanged between the RX3i CPU and the PROFINET network, with selectable update intervals and module status data. Media redundancy and other network functions depend on the hardware, firmware, CPU and project configuration; the complete LT article must be matched before replacement.
BEFORE YOU BUY
Confirm the complete profinet i/o controller
ACTUAL APPLICATIONS
Application context for IC695PNC001LT
IC695PNC001LT supports PROFINET I/O communication in compatible RX3i configurations for industrial manufacturing, water treatment and energy production. The exact hardware revision, firmware, CPU support, network topology and selected copper or optical interfaces determine compatibility.
-
01 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Discrete Manufacturing and AssemblyIndustrial Production and Processing -
02 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Municipal Drinking Water TreatmentIndustrial Wastewater Treatment Processes -
03 · POWER GENERATION
Electric Power and Energy Generation
Thermal Power and Electricity GenerationIndustrial Energy Production Processes
Technical specifications for IC695PNC001LT
-
Product ModelIC695PNC001LT
-
Product ParametersPROFINET I/O Controller
-
In stock2 units
-
ManufacturerGeneral Electric
-
PROFINET interfaceVersion 2.2, General Class A I/O Controller
-
Copper network connectors2 RJ45
-
Optical network connectors2 SFP cages; SFP devices supplied separately
-
Ethernet link rates10/100/1000 Mbps
-
PROFINET link rates100/1000 Mbps
-
I/O memory128 KB combined input and output per controller
-
CPU status data32 bits
-
PROFINET update intervals1, 2, 4, 8, 16, 32, 64, 128, 256 or 512 ms
-
IP address count1
-
MAC address count5
-
Controllers per RX3i CPU4 maximum in the main rack
-
I/O devices per controller64 maximum
-
I/O devices per RX3i CPU128 maximum
-
PROFINET slots per device256 maximum
-
PROFINET subslots per slot256 maximum
View all additional
Alternative Names
IC695PNC001LT
PACSystems RX3i PROFINET I/O Controller
RX3i Version 2.2, General Class A I/O Controller profinet interface
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC695PNC001LT profinet i/o controller
IC695PNC001LT is a profinet i/o controller in the PACSystems RX3i platform. Match the exact article and hardware revision to the installed backplane and controller configuration before allocating channels, connections or network resources.
Compare profinet interface (Version 2.2, General Class A I/O Controller), copper network connectors (2 RJ45) and optical network connectors (2 SFP cages; SFP devices supplied separately) with the project requirements. Use the applicable terminal assignments, power budget and grounding requirements from the manufacturer documentation.
Configure the supported operating modes for IC695PNC001LT, then verify the affected signals or communications in the approved controller project. Record configuration changes, diagnostic results and the completed functional checks with the equipment record.
Features:
- PROFINET interface: Version 2.2, General Class A I/O Controller
- Copper network connectors: 2 RJ45
- Optical network connectors: 2 SFP cages; SFP devices supplied separately
The IC695PNC001LT profinet i/o controller requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC695PNC001LT profinet i/o controller
Replace IC695PNC001LT after comparing the complete label, hardware revision and PACSystems RX3i role with the installed article. Confirm connector allocation and the supported controller configuration before exchanging the module.
Preserve the controller project and relevant channel or communication settings before removing IC695PNC001LT. Photograph field connections and grounding, identify connected circuits, and isolate the required power supplies according to the manufacturer procedure.
Restore the approved configuration after fitting IC695PNC001LT. Check module status indications, the affected I/O or network connections and the required operating responses, then retain the replacement identity and final acceptance results.
Features:
- PROFINET interface: Version 2.2, General Class A I/O Controller
- Copper network connectors: 2 RJ45
- Optical network connectors: 2 SFP cages; SFP devices supplied separately
The IC695PNC001LT profinet i/o controller requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC695PNC001LT profinet i/o controller must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.5 × 14.7 × 13.5cm
-
Shipping weight0.44kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695PNC001LT
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What field-network role does the RX3i PNC001 controller perform?
It acts as a PROFINET I/O controller, exchanging configured process data with supported I/O devices. -
How many copper and optical connections are available on PNC001?
The interface arrangement provides two RJ45 connectors and two SFP cages; optical transceivers are selected separately. -
What is the maximum configured I/O data memory per PROFINET controller?
The documented combined input/output memory is 128 KB per controller. -
Which update intervals can be selected for PROFINET I/O exchange?
Supported intervals are powers of two from 1 ms through 512 ms. -
How many field devices can one PROFINET controller address?
The documented limit is 64 I/O devices per PROFINET controller. -
Can the LT suffix alone establish the USB interface or firmware version?
No. Confirm the complete hardware and firmware revision; PNC001 hardware generations differ in their service interfaces. -
Which network configuration details are required when sourcing an LT replacement?
Provide the complete IC695PNC001LT label, hardware revision, CPU configuration, firmware and SFP requirements. -
How should the PROFINET controller be identified during incoming inspection?
Record the full LT article and revision, compare connector types and inspect the RJ45 connections and SFP cages against the order.
READY TO VERIFY YOUR PART?
Get a IC695PNC001LT quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
