AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for IC694ALG391
-
Product ModelIC694ALG391
-
Product ParametersAnalog output module
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size3.5x13.2x13.5cm
-
ManufacturerGeneral Electric
-
Weight0.34 kg
-
Output Current Range4 to 20 mA and 0 to 20 mA
-
Output Voltage Range1 to 5 volts and 0 to 5 volts
-
CalibrationFactory calibrated to 4 µA per count
-
External Supply Voltage Range20 VDC to 30 VDC
-
External Supply Voltage Ripple10%
-
Update Rate5 milliseconds
-
Maximum Compliance Voltage25 VDC
-
User Load (current mode)0 to 850 Ohms
-
Output Load Capacitance2000 pF
-
Maximum Output Loading5 mA
Description
IC694ALG391
OUTPUT MODULE
ANALOG CURRENT
2 POINTS
1-5 V & 0-5 V / 0-20 MA / 4-20 MA ANALOG OUTPUT
12 BIT RESOLUTION
PACSYSTEMS RX3I
PANEL/DIN RAIL MOUNT
OUTPUT MODULE
ANALOG CURRENT
2 POINTS
1-5 V & 0-5 V / 0-20 MA / 4-20 MA ANALOG OUTPUT
12 BIT RESOLUTION
PACSYSTEMS RX3I
PANEL/DIN RAIL MOUNT
Revisions
Revision Part #
Also known as
Information
Overview
Manuals
Technical notes
Product Applications
Key Installation Steps
Features:
- Two Independent Analog Output Channels
- Selectable Output Ranges
- Configurable Default State
- Real-Time Updates
- Flexible Power Options
The IC694ALG391 GE Analog Output Module may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
GE IC694ALG391 Analog Output Module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Each output may also be set up as a less accurate voltage source.The selection of current or voltage output is made with a jumper orresistor on the module terminals. Both channels are updated onevery scan.The module’s outputs can be set up to either Default to 0/4 mA orHold–Last–State if the CPU goes to the Stop mode or Reset.Selection of the output default state is made by a jumper on themodule’s terminal board. See Output Defaults in this section for moreinformation.
- Assembly Lines: Used to track the movement of parts between stations by receiving signals from sensors
- Injection Molding Machines: Interfaces with limit switches and pressure switches to control the molding cycle
- Water Treatment Systems: Monitors float switches and valve positions for fluid control
- Chemical Delivery Systems: Receives signals from safety valves and level sensors for precise fluid dosing
- Substation Control Systems: Used in small to mid-range automation for monitoring circuit breakers or status indicators
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Safety Notice: Always shut down power to the backplane before removing or installing the module, as it is not hot-swappable.
Mounting: Seat the module securely into any I/O slot of the RX3i or Series 90-30 backplane.
Wiring: Use high-grade twisted, shielded instrumentation cable to minimize noise.
Shield Grounding: Connect cable shields to the GND terminal on the connector block to connect to the backplane frame ground.
FAQs
-
What is the GE IC694ALG391?
+The GE IC694ALG391 is a 2-channel analog current output module designed for the PACSystems RX3i series, capable of converting 12 bits of digital data into analog output signals. -
What output ranges does the IC694ALG391 support?
+The jumpers on the module can be configured for 0 to 20 mA or 4 to 20 mA per channel. -
Can the IC694ALG391 module output voltage?
+Yes, it can be used as a low-precision voltage source, configured via a jumper or by connecting a 250-ohm resistor in series with the terminals. -
What happens if the CPU stops?
+The module can be configured via jumpers to either default to 0/4 mA or hold the last valid output state. -
What are the power requirements?
+The module requires a +24 VDC external power source, particularly when used in an IC695 CHS 007, 012, or 016 rack. It consumes 30 mA @ +5VDC and 120 mA @ +24VDC.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
IC694ALG223Input module, analog 16 point single ended, current.Manufacturer: General ElectricView Details -
-
-
-
-
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN