AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for IC694ALG221
-
Product ModelIC694ALG221
-
Product ParametersAnalog input module
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size3.5x13.2x13.5cm
-
ManufacturerGeneral Electric
-
Weight0.36 kg
-
Input Current Ranges4 to 20 mA and 0 to 20 mA
-
CalibrationFactory calibrated to 4 µA per count
-
Update Rate2 milliseconds
-
Resolution at 4–20 mA4 µA
-
Resolution at 0–20 mA5 µA
-
Absolute Accuracy0.1% full scale + 0.1% reading
-
Common Mode Voltage200 volts
-
Linearity< 1 Least Significant Bit
-
Common Mode Rejection> 70dB at DC; >70dB at 60Hz
-
Input Impedance250
-
Input Filter Response325 Hz
Description
IC694ALG221
ANALOG INPUT MODULE
PACSYSTEMS RX3I
4 CHANNEL
CURRENT
4-20MA
24VDC SUPPLY
ANALOG INPUT MODULE
PACSYSTEMS RX3I
4 CHANNEL
CURRENT
4-20MA
24VDC SUPPLY
Revisions
Revision Part #
Also known as
Information
Overview
Manuals
Technical notes
Product Applications
Installation and Wiring Instructions
Features:
- 4–Channel Analog Current Input
- 4 to 20 mA
- PACSystems RX3i System
The GE Fanuc RX3i PacSystems IC694ALG221 4-point analog draw current from the backplane. At 5 Volts DC, this analog input module can support a load of 25 milliamps or 0.125 Watts. At 24 Volts DC isolated voltage, this input module can support a load of 100 milliamps or 2.4 Watts. The IC694ALG221 input module can also operate with 2 different input current ranges which are 4 to 20 milliamps and 0 to 20 milliamps. This module comes with a range jumper for input channels 1 and 2, and another range jumper for input channels 3 and 4. Every channel has a conversion speed of half a millisecond. There is 1 green LED on the module known as the Module OK LED that lights up when the module is powered on.
The IC694ALG221 GE Analog Input Module may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
GE IC694ALG221 Analog Input Module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Two range jumpers are provided with Module; one for channelsone and two, and the other for channels three and four.Conversion speed for each of the four channels is one–halfmillisecond. This provides an update rate of two milliseconds forany channel. Resolution of the converted signal is 12-bit binary(1 part in 4096) over either range.Input protection for Module is sufficient for operation withreduced performance with up to 200 V common–mode. Moduleprovides electrical isolation of externally generated noise betweenfield wiring and the backplane through the use of optical isolation.This module can be installed in any I/O slot of an RX3i system.Module does not support insertion into or removal from an RX3iUniversal Backplane which is under power (see Hot Insertion andRemoval Not Supported
- Smart Home/Building Automation:Sensor input for sophisticated environmental control
- Environmental Monitoring:Analyzes gas, humidity & temp sensor data
- Pharmaceutical Manufacturing:Precise monitoring for stability & compliance
- Food Processing:Regulates temp, flow & pressure for quality/safety
- Petrochemical Industry:Monitors pressure, temp & levels for safety/efficiency
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Backplane: Can be installed in any I/O slot of an RX3i Universal or Expansion backplane.
Power Requirement: Requires an external 24 VDC source connected via terminal TB1 on the left side of the backplane if installed in a Universal Backplane.
Wiring: Connect field devices to the module terminal block. Use shielded, twisted-pair cable to reduce noise.
Ranges: The module is configured for 4-20mA (default) or 0-20mA using two range jumpers (one for channels 1-2, one for channels 3-4).
FAQs
-
What is the IC694ALG221?
+The GE IC694ALG221 is a 4-channel, differential, analog current input module for the PACSystems RX3i series (also compatible with Series 90-30). It converts analog current signals (0-20mA or 4-20mA) into digital data. -
How many channels does IC694ALG221 have?
+It has 4 differential current input channels. -
What power supply does IC694ALG221 require?
+It requires a 24VDC power supply, typically connected to the TB1 terminal block. -
How do I configure the ranges?
+The module uses two jumpers to set ranges: one for channels 1 and 2, and one for channels 3 and 4. Connecting a jumper to the I/O terminal panel sets the corresponding channels to 0-20mA.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
IC695HSC304RX3i High Speed Counter, 4 channels. 8 configurable inputs and 7 configurable ESCP outputs. Module supports high speed counting, input interrupts and programmable limit switch.Manufacturer: General ElectricView Details -
-
-
-
-
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN