AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for IC698CMX016
-
Product ModelIC698CMX016
-
Product ParametersRedundant Memory Exchange Module
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size4.1x17.4x29.3cm
-
ManufacturerGeneral Electric
-
Weight0.8 kg
-
User memory16MB SDRAM
-
Operating voltage+5VDC
-
Current requirements1.8A
-
Insertion loss0.35 dB (maximum)
-
Return loss-30dB
-
Temperature Range-20°C to +85°C
Description
IC698CMX016
CONTROL BOARD
CONTROL MEMORY XCHANGE
16MB MEMORY
CONTROL BOARD
CONTROL MEMORY XCHANGE
16MB MEMORY
Revisions
Revision Part #
Also known as
Information
Overview
Manuals
Technical notes
Product Applications
Hardware Installation
Features:
- PACSystems RX7i single slot form factor
- 16 Mbytes reflective memory with parity
- Software configuration of all node parameters (no jumper or switch settings required)
- High-speed easy-to-use 2.12 Gbaud fiber-optic network
- No RX7i CPU processing required to operate the network
- Network-compatible with VMIC 5565 family of reflective memory devices
- Connection with multimode fiber up to 300m/984.25ft
- Dynamic packet sizes of 4 to 64 bytes, controlled by the Memory Xchange module
- Programmable VMEbus interrupt output
- Up to 256 nodes per network
The Control Memory Xchange (CMX) module provides deterministic sharing of data among PLCs andother computing devices on a high-speed fiber optic network, using reflective memory technology. Areflective memory network can contain up to 256 nodes. Each node in the network can be any reflectivememory device that is compatible with the 5565 family. When data is written to one node, all nodes on thenetwork are automatically updated with the new data.
The IC698RMX016 GE Redundant Memory Exchange Module may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
GE IC698RMX016 Redundant Memory Exchange Module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The CMX module initially powers up in an unconfigured state with its optical transmitter and receiver disabled. Themodule cannot operate on a network until the RX7i CPU has delivered a hardware configuration to the module.Basic operating functions are configured using Machine Edition – Logic Developer PLC. You can configure the followingparameters in the hardware configuration: Node ID, Redundant Transfer Mode, Rogue Master, Network Memory Offset,and Interrupt enable.Additional functions beyond the basic read and write operations, including enabling interrupts, reading interrupt status,enabling parity, and reading parity errors, can be performed by user logic. For details on accessing these advancedfunctions, refer to the PACSystems RX7i Memory Xchange Modules User’s Manual, GFK-2300.
- Steel and Aluminum Rolling Mills:Syncs high-speed motors; microsecond delay causes tension/damage
- Automotive Manufacturing:Real-time coordination for robots, conveyors & sensors
- Aerospace and Flight Simulation:Links cockpit, visuals & motion base for simultaneous data
- Energy and Power Plants:Turbine control & grid sync for voltage/load balancing
- High-Speed Testing Facilities:Real-time data collection for jet engine/wind tunnel tests
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Slot Placement: The module should only be installed in the RX7i Main Rack (Rack 0). It is highly recommended to use slots 3 or 4 to give the module VME interrupt request priority, although it can technically function in other slots if necessary.
Power Down: Always switch off the rack power before inserting or removing the module to prevent electrical damage.
Module Insertion: Align the module with the rails of the chosen slot and slide it in until it is firmly seated in the backplane. Secure the module by tightening the faceplate screws at the top and bottom.
Power Requirements: Ensure your power supply can handle the module's load, as it draws approximately 1.2 to 1.8 Amps from the 5V bus.
FAQs
-
What is the IC698CMX016?
+It is a Control Memory Xchange module that acts as a node on a reflective memory network or a dedicated link between CPUs in an RX7i system. -
What is reflective memory?
+It allows multiple controllers to share data. When data is written to one node, all nodes on the network are automatically updated, providing deterministic, high-speed communication. -
How many modules are supported in an RX7i rack?
+A PACSystems RX7i main rack supports a maximum of 4 Memory Xchange modules. -
Does the module require configuration?
+Yes. When used as a node, the IC698CMX016 is initially powered on in a non-configured state with the transmitter disabled; it requires configuration parameters (like Node ID and Network Memory Offset) sent by the CPU. -
How much power does it draw?
+The module has a backplane current consumption of 1.8 Amperes at 5VDC
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN