AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for IC698CHS017
-
Product ModelIC698CHS017
-
Product ParametersRX7i 17 Slot Rack Wall (Rear) Mount
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size48.3x28.3x18.6cm
-
ManufacturerGeneral Electric
-
Weight6.12 kg
-
ApplicationRx7i System
-
Operating Voltage5 to 12 Volts DC
-
Power Supply350 Watts Power Supply
-
Current Rating60 Amps at 5 Volts DC, 4.0 Amps at 12 Volts DC
-
I/O Capacity17 Slots
Description
IC698CHS017
PLC RACK
RX7I
17 SLOT
REAR WALL MOUNT
PLC RACK
RX7I
17 SLOT
REAR WALL MOUNT
Information
Overview
Manuals
Technical notes
Product Applications
Grounding & Noise Protection
Features:
- Slot sensing for rack I/O modules
- No jumpers/DIP switches for addressing
- Auto daisy‑chain interrupts; no blank jumpers
- J2 backplane: 64‑bit VME transfers
- Accepts plug‑in RX7i AC power supplies
- Supports high‑current config; optional cooling fan
The IC698CHS017 GE PLC Rack may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
GE IC698CHS017 PLC Rack Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The GE Fanuc IC698CHS017 Rx7i I/O Rack is a 17-slot, rear-mounted I/O rack for the Rx7i PACsystem series. The IC698CHS017 Rack, like every Rx7i PACsystem rack, is designed to support the high-powered Rx7i PACsystem power supplies, and it comes with a VME64 backplane, which is almost 4 times faster than the standard VME-based systems and it supports all standard VME modules, including the VMIC and Series 90-70 I/O modules. The IC698CHS017 Rack features a built-in slot-sensing capability that requires no additional jumpers or DIP switches on I/O modules for I/O reference addressing. The IC698CHS017 Rack supports a higher wattage power supply, and it is compatible with the Rx7i AC power supply plug-in. The IC698CHS017 Rack has an open-style design and so it requires a standard enclosure with an IP 54 or higher rating for use on the factory floor.
- Automotive Assembly Plants:High-density I/O for multi-step robotics & conveyors
- Steel Mills & Heavy Metallurgy:Extreme electrical/temp: smelting & heavy machinery
- Oil & Gas Refineries:Distributed I/O for pipeline management & refining workflows
- Power & Energy Substations:Redundant data throughput to prevent catastrophic failures
- Water & Wastewater Treatment Facilities:Distributed I/O for filtration & processing networks
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Rack Grounding: Use AWG #12 (3.33 mm²) wire to connect the side-mounted #8-32 ground studs to a reliable earth ground.
Power Supply Grounding: Connect the power supply's GND terminal to the rack’s ground terminal using AWG #12 wire, ideally with a ring terminal and star washer.
EMI Shielding: Ensure RX7i modules are firmly attached to the enclosure. Their faceplates feature EMI gaskets that form a continuous shield when modules are adjacent.
FAQs
-
What is IC698CHS017?
+The GE IC698CHS017 is a 17-slot, standard rear-mount rack designed for the GE Fanuc RX7i PACSystems platform. -
How many slots does the IC698CHS017 have?
+It has 17 slots. It can accommodate 15 single-width modules or up to 8 double-width modules. -
What must be installed in Slot 0?
+The leftmost slot, Slot 0, must be occupied by an RX7i Power Supply. -
What power supply does IC698CHS017 require?
+This rack supports plug-in RX7i power supplies with a maximum power of 350 watts. -
Are jumpers required for module addressing?
+No. The rack provides automatic slot sensing for I/O modules and automatic daisy-chaining of interrupt signals, eliminating the need for blank slot jumpers.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN