
POWER DISTRIBUTION CABLE SET CPCHAS
Approvals:UL, CSA; FM pending
Cable Type:CC600, 2 × 2.5 mm² conductors
Busbar Connector:2‑pole “Squeeze‑To‑Release”
Function:Connects 24V rails
ART PWR DISTR.CABLE IOCHAS-0002 5VDC WD
Approvals: UL, CSA pending
Length: 2 m
Type: 3 pole socket connector
Make: Weidmuller: BLZ 5.08/03/180F SN BK
Power Rail
POWER BUSBAR MAX.200A 24/48/110VDC,150CM
Nominal Voltage:24 Vdc, 48 Vdc, 110 Vdc
Max Current:200 A continuous
Length:1,500 mm (150 cm)
Bus Sections 10 sections 152.4 mm each
Approvals:UL, CSA, FM‑pending
A.R.T. CHASSIS FOR CONTROL PROCESSOR
Power Supply Inputs:Dual 5V DC (5V-1 and 5V-2)
Power Consumption:0.05 A per 5V input rail
Chassis Width:482.6 mm (19 inches)
Operating Temperature:0°C to +50°C
Storage Temperature:-40°C to +70°C
Relative Humidity:5% to 95% non-condensing
COMMUNICATION CABLE
Approval: UL, CSA, FM
Type: BELDEN 8105 5x2 CORE SHIELD
Length: 2 m
Control Processor side: (USI-0002) 10-pins
DCOM-232/485 side: 16-pins
SET ETHERNET CABLES INTERNAL, SFTP,1Y/1G
Type: Shielded, twisted-pair cable
Number of conductors: 4
Wire gauge: 22 AWG
Insulation: PVC
Jacket: PVC
Flame retardant: Yes
Plenum-rated: Yes
Length: Varies depending on supplier
Dummy Communication Module
Function:Placeholder for unused COM slots
Compatible Systems:Honeywell FSC
Matches system range: –25 °C to +70 °C typical
I/O Chassis
Form Factor: 19-inch standard rack width
Slot Capacity: 21 slots for I/O module
Voltage: 24 V DC (±10%)
Humidity: 5–95% RH (non-condensing).
Vibration: 5–500 Hz, 2 g RMS (IEC 60068-2-6).
Shock: 30 g peak, 11 ms
24VDC FAN UNIT WITH READBACK CC
Power Rating:1 HP
Motor Type:Induction Motor
Speed Control:Variable Speed
Airflow Capacity:2000 CFM @ 0.5 PSI
Duct Compatibility:Standard 12″ Diameter
Noise Level:72 dB(A)
Inlet Diameter:12″
Voltage:230V, 60Hz
Power Supply
Temperature Range -40°C min, +40°Cmax
Output CurrentLimits¹ 16A max
Power DissipationLimits 50W
Current limit ranges from 10 A to 16 A