PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
10310/2/1 earth leakage detector
HONEYWELL 10310/2/1 earth leakage detector supports Honeywell Safety Manager systems. The assembly combines the documented electrical, signal and mechanical interfaces for its assigned system position. It processes or transfers the defined operating signals through the configured equipment path. The resulting interface supports repeatable control, protection or measurement performance within the approved installation.
BEFORE YOU BUY
Confirm the complete earth leakage detector
ACTUAL APPLICATIONS
Verified application context for 10310/2/1
Manufacturer documentation supports these equipment applications when the complete system configuration and interfaces are verified.
-
01 · OIL & GAS
Emergency shutdown cabinet power distribution
Safety DC systemsCompressor shutdown relay power panelsPipeline isolation solenoid power circuits -
02 · CHEMICAL PROCESSING
Reactor interlock and trip power panels
Protective power systemsReactor trip relay supply cabinetsProcess isolation valve trip circuits -
03 · POWER GENERATION
Turbine and boiler protection cabinets
Plant trip systemsTurbine emergency trip DC busesBoiler burner interlock power panels
Technical specifications for 10310/2/1
-
Product Model10310/2/1
-
Product Parametersearth leakage detector
-
In stock1 unit
-
ManufacturerHoneywell
-
Monitored DC Systems24, 48, 60 or 110 V DC
-
Module Supply Voltage24 V DC, 30 V DC maximum
-
Supply Current60 mA maximum
-
Rst24 Input Range18 to 70 V DC
-
Rst110 Input Range40 to 130 V DC
-
Rst24 Input Current1.1 mA at 24 V DC
-
Rst110 Input Current2.5 mA at 110 V DC
-
Normal Earth Voltage-12 V DC
-
Earth Fault Threshold-30 to +125 V DC
-
Earth Current Range5.5 mA ±1 mA
-
Alternate Earth Current25.0 mA ±5 mA
-
Maximum Output Voltage115 V DC
-
Maximum Output Current2 A
-
Relay Switched Load100 W or 1000 VA
-
Module KeyingHoles A5 and A11
View all additional
Alternative Names
10310/2/1
HONEYWELL earth leakage detector
Honeywell Safety Manager systems earth leakage detector
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 10310/2/1 to the installed Honeywell Safety Manager systems
HONEYWELL 10310/2/1 is a earth leakage detector for the Honeywell Safety Manager systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare rst24 input range (18 to 70 V DC), rst110 input range (40 to 130 V DC) and rst24 input current (1.1 mA at 24 V DC) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 10310/2/1
- Product class: earth leakage detector
- Family: Honeywell Safety Manager systems
The HONEYWELL 10310/2/1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 10310/2/1 identity before exchange
Replace 10310/2/1 only after matching the complete article code, earth leakage detector, installed Honeywell Safety Manager systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 10310/2/1
- Product class: earth leakage detector
- Family check: Honeywell Safety Manager systems
The HONEYWELL 10310/2/1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Official CA-H200C product references are checked before order
- Confirm camera and controller compatibility in current manuals
- Accessories are supplied only when listed in the quotation
Documentation for the KEYENCE CA-H200C cable must be matched to the connected camera and controller; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.0 × 12.0 × 18.0 cm
-
Shipping weight0.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 10310/2/1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which identifier should be quoted for 10310/2/1?
Use the complete 10310/2/1 identifier, earth leakage detector, quantity and clear nameplate photographs. -
What should be matched before installing 10310/2/1?
Match the documented ratings, connections, revision and assigned role in Honeywell Safety Manager systems. -
What should incoming inspection cover for 10310/2/1?
Inspect the label, housing, connectors, terminals and transport condition before use. -
Can a related Honeywell Safety Manager systems article replace 10310/2/1?
Do not assume interchangeability; compare the full identity, ratings, interfaces and configured role. -
Which records should be captured before removing 10310/2/1?
Record connector positions, wire labels, cabinet location, adjacent hardware and current diagnostics. -
Which configuration should be retained for 10310/2/1?
Archive the applicable controller or monitoring configuration, addresses and diagnostic records. -
How should 10310/2/1 be commissioned after installation?
Restore verified wiring and configuration, then test the affected earth leakage detector function under controlled conditions. -
Which documents should remain with the 10310/2/1 asset record?
Retain receiving inspection, nameplate images, connection records, test results and final acceptance evidence.
READY TO VERIFY YOUR PART?
Get a 10310/2/1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
