PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Honeywell
- M7284A1038
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
M7284A1038 Modutrol IV motor actuator
Honeywell M7284A1038 is a Modutrol IV motor actuator in the Series 72 Modutrol IV. It is used to convert electrical energy into the documented mechanical drive function.
Its documented configuration includes supply voltage of 120 V AC, control input of 4 to 20 mA, torque rating of 75 lb-in / 8.5 N·m, and stroke time of 15 to 30 seconds. During operation, the Modutrol IV motor actuator performs its assigned Modutrol IV motor actuator function through the documented power, signal and communication interfaces.
Its documented configuration includes supply voltage of 120 V AC, control input of 4 to 20 mA, torque rating of 75 lb-in / 8.5 N·m, and stroke time of 15 to 30 seconds. During operation, the Modutrol IV motor actuator performs its assigned Modutrol IV motor actuator function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete Modutrol IV motor actuator
ACTUAL APPLICATIONS
Application context for M7284A1038
Manufacturer documentation places the Modutrol Iv Motor Actuator in practical safety applications. The three cases below describe different operating tasks in which M7284A1038 performs its documented product-family role with the configured companion equipment.
- 01 · CHEMICAL & PETROCHEMICAL
Verify burner management during startup permissive check
In the automation chain for the fuel trains, flame signals and purge equipment, M7284A1038 performs its assigned control role as a Modutrol Iv Motor Actuator. During startup permissive check, the system uses this function to confirm permissives before enabling the hazardous step, helping it prevent fuel admission before purge conditions are met. - 02 · OIL & GAS
Govern pipeline isolation with Modutrol Iv process control
During operation of the line-pressure inputs and sectionalizing valves, M7284A1038 operates in its approved product-family role as a Modutrol Iv Motor Actuator. During confirmed line event, the system uses this function to isolate the affected transfer section, helping it contain the event within the intended section. - 03 · POWER GENERATION
Protect burner management with Modutrol Iv process control
Inside the flame detectors, purge devices and fuel valves, M7284A1038 performs its assigned control role as a Modutrol Iv Motor Actuator. During light-off sequence, the system uses this function to prove purge and flame conditions before fuel admission, helping it prevent an unsafe burner start.
Technical specifications for M7284A1038
-
Product ModelM7284A1038
-
Product ParametersModutrol IV motor actuator
-
In stock1 unit
-
ManufacturerHoneywell
-
Supply Voltage120 V AC
-
Control Input4 to 20 mA
-
Torque Rating75 lb-in / 8.5 N·m
-
Stroke Time15 to 30 seconds
-
Rotation Range90° factory setting
-
Adjustable Stroke90° to 160° asymmetric
-
Auxiliary SwitchNot included
-
Wiring MethodScrew terminals
-
Power Consumption15 VA nominal
-
Motor SeriesSeries 72 Modutrol IV
-
Mechanical OutputRotary shaft drive
-
ApplicationDamper and valve positioning
-
TransformerInternal supply transformer
-
Product Weight7.5 lb / 3.4 kg
-
CommissioningStroke and feedback calibration
View all additional
Alternative Names
M7284A1038
M7284A1038
Honeywell M7284A1038
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match M7284A1038 to the installed Series 72 Modutrol IV
Honeywell M7284A1038 is a Modutrol IV motor actuator used in the Series 72 Modutrol IV.
Confirm supply voltage, torque rating, field terminals and the approved system configuration.
Use qualified personnel and follow the applicable Honeywell installation and commissioning instructions.
Features:
- Exact identity: M7284A1038
- Product class: Modutrol IV motor actuator
- Family: Series 72 Modutrol IV
The Honeywell M7284A1038 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete M7284A1038 identity before exchange
Replace M7284A1038 only after matching its full product identity, system role and electrical interface.
Photograph terminals, cable routing, slot position and companion hardware before removal from the Series 72 Modutrol IV installation.
Follow the applicable Honeywell service procedure and complete stroke and feedback calibration before release.
Features:
- Match exact M7284A1038 identity
- Confirm wiring and companion hardware
- Record the controlled functional test
The Honeywell M7284A1038 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for M7284A1038
- Honeywell system references reviewed
- Exact hardware identity required before service
Documentation for Honeywell M7284A1038 must match the installed system and revision; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size14 × 16.2 × 18.5 cm
-
Shipping weight3.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8501109990
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about M7284A1038
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should technicians commission the supply voltage on M7284A1038?
For M7284A1038, run the documented channel test; the accepted supply voltage is 120 V AC in the documented Series 72 Modutrol IV configuration. -
What fault can a mismatch in control input cause on M7284A1038?
For M7284A1038, review diagnostics before energising; the accepted control input is 4 to 20 mA in the documented Series 72 Modutrol IV configuration. -
Which companion hardware must agree with 75 lb-in / 8.5 N·m on M7284A1038?
For M7284A1038, match the mating assembly and revision; the accepted torque rating is 75 lb-in / 8.5 N·m in the documented Series 72 Modutrol IV configuration. -
What record proves the rotation range check for M7284A1038 was completed?
For M7284A1038, save the measured commissioning result; the accepted rotation range is 90° factory setting in the documented Series 72 Modutrol IV configuration. -
How does auxiliary switch Not included define the correct M7284A1038 installation?
For M7284A1038, compare the installed nameplate and order code; the accepted auxiliary switch is Not included in the documented Series 72 Modutrol IV configuration. -
Which field check confirms 15 VA nominal for M7284A1038?
For M7284A1038, measure the live field condition safely; the accepted power consumption is 15 VA nominal in the documented Series 72 Modutrol IV configuration. -
Why is the documented application critical on M7284A1038?
For M7284A1038, confirm the engineering configuration; the accepted application is Damper and valve positioning in the documented Series 72 Modutrol IV configuration. -
What wiring decision for M7284A1038 depends on Stroke and feedback calibration?
For M7284A1038, inspect the exact terminal and cable route; the accepted commissioning is Stroke and feedback calibration in the documented Series 72 Modutrol IV configuration.
READY TO VERIFY YOUR PART?
Get a M7284A1038 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
