PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Honeywell
- RA890F 1304
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
RA890F 1304 RA890F flame safeguard primary control
Honeywell RA890F 1304 is a RA890F flame safeguard primary control in the Honeywell RA890F burner controls. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete RA890F flame safeguard primary control
ACTUAL APPLICATIONS
Application context for RA890F 1304
Manufacturer documentation places the RA890F flame safeguard primary control in practical process applications. The three cases below describe different operating tasks in which RA890F 1304 performs its documented product-family role with the configured companion equipment.
-
01 · PULP & PAPER
Support stock preparation with Ra890F Flame process control
As part of the pulp chests and refiners, RA890F 1304 operates in its approved product-family role as a RA890F flame safeguard primary control. During grade change, the system uses this function to coordinate flow, consistency and equipment permissives, helping it deliver stable stock to the machine. -
02 · WATER & WASTEWATER
Regulate aeration control with Ra890F Flame process control
Within the blowers and dissolved-oxygen loops, RA890F 1304 provides its specified system function as a RA890F flame safeguard primary control. During changing oxygen demand, the system uses this function to adjust air delivery from process feedback, helping it stabilize treatment performance. -
03 · CHEMICAL & PETROCHEMICAL
Control utility distribution during utility constraint
During operation of the steam, cooling and instrument-air headers, RA890F 1304 provides its specified system function as a RA890F flame safeguard primary control. During utility constraint, the system uses this function to prioritize process users from measured demand, helping it protect production continuity during the constraint.
Technical specifications for RA890F 1304
-
Product ModelRA890F 1304
-
Product ParametersRA890F flame safeguard primary control
-
In stock1 unit
-
ManufacturerHoneywell
-
Exact Article CodeRA890F 1304
-
Product ClassRa890F Flame Safeguard Primary Control
-
Product FamilyHoneywell RA890F burner controls
-
Supply Voltage220 V AC
-
Supply Frequency50/60 Hz
-
Flame Failure Response0.8 s
-
Safety Switch Timing15 s
-
Flame Detector InputRectification flame rod / photocell class
-
Relay OutputSPDT flame relay
-
Burner TypeIndustrial gas or oil burner
-
Reset MethodManual safety switch reset
-
MountingSubbase plug-in control
-
Approval FamilyHoneywell flame safeguard
View all additional
Alternative Names
RA890F 1304
Honeywell RA890F flame safeguard primary control
Honeywell RA890F burner controls RA890F flame safeguard primary control
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match RA890F 1304 to the installed Honeywell RA890F burner controls
Honeywell RA890F 1304 is a RA890F flame safeguard primary control for the Honeywell RA890F burner controls. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare supply voltage (220 V AC), supply frequency (50/60 Hz) and flame failure response (0.8 s) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: RA890F 1304
- Product class: RA890F flame safeguard primary control
- Family: Honeywell RA890F burner controls
The Honeywell RA890F 1304 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete RA890F 1304 identity before exchange
Replace RA890F 1304 only after matching the complete article code, RA890F flame safeguard primary control, installed Honeywell RA890F burner controls role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: RA890F 1304
- Product class: RA890F flame safeguard primary control
- Family check: Honeywell RA890F burner controls
The Honeywell RA890F 1304 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for RA890F 1304
- Product family: Honeywell RA890F burner controls
- Exact Honeywell identity required before service
Documentation for Honeywell RA890F 1304 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size12.7 × 12.7 × 12.7 cm
-
Shipping weight0.90 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about RA890F 1304
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What should engineering compare before integrating RA890F 1304 into the installed system?
Compare the documented Honeywell RA890F burner controls role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to RA890F 1304?
Inspect the RA890F 1304 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same Honeywell RA890F burner controls family directly replace RA890F 1304?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing RA890F 1304?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting RA890F 1304. -
Which configuration data should be backed up before exchanging RA890F 1304?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission RA890F 1304 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected RA890F flame safeguard primary control function at a safe operating point. -
What service evidence should be retained after work on RA890F 1304?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for RA890F 1304. -
Which nameplate details identify the correct RA890F 1304 for a distributor quotation?
Quote RA890F 1304 with the complete suffix, RA890F flame safeguard primary control, Honeywell RA890F burner controls, quantity and clear nameplate photographs.
READY TO VERIFY YOUR PART?
Get a RA890F 1304 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
