PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
T9401 AADvance 8-channel digital input module
T9401 is an AADvance digital input module with 8 isolated channels for field signals in the 0 to 32 V DC range. It supplies channel state and measured voltage information to the processor, with configurable bands for line monitoring and diagnostics.
The module provides local status indicators and an independent watchdog, with signal and power isolation to contain field faults. It uses compatible digital input termination assemblies; simplex, dual or TMR operation depends on the selected assemblies, module population and controller configuration.
The module provides local status indicators and an independent watchdog, with signal and power isolation to contain field faults. It uses compatible digital input termination assemblies; simplex, dual or TMR operation depends on the selected assemblies, module population and controller configuration.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T9401 Fits Across Industrial Production Fields
Used in oil, chemical and power operations where field devices, termination selection and controller configuration are compatible.
-
01 · CHEMICAL PROCESSING
Continuous Chemical Production and Batch Manufacturing Process Areas
Bulk chemical production plants handling continuous industrial processing operations.Specialty chemical facilities combining batch preparation and formulation operations. -
02 · POWER GENERATION
Natural Gas Electricity Production and Utility Generation Facilities
Utility generating stations producing electricity from natural gas combustion.Combined cycle facilities combining turbine generation with steam production. -
03 · OIL & GAS
Hydrocarbon Production, Refining and Petroleum Transport Operating Areas
Oil extraction facilities handling production and initial hydrocarbon processing.Gas processing facilities and petroleum terminals serving transportation networks.
Technical specifications for T9401
-
Product ModelT9401
-
Product Parameters8 Channel Digital Input Module
-
ManufacturerICS Triplex
-
Input channels8
-
Input signal range0 to 32 V DC
-
Module supplyRedundant nominal 24 V DC; 18 to 32 V DC
-
Module power dissipation3.3 W
-
Sample update interval6 ms with no filter
-
Measurement resolution5 mV, 13-bit
-
Input voltage accuracy+/-0.5 V
-
Channel isolation withstand+/-1.5 kV DC for 1 minute
-
Self-test intervalLess than 1 hour; system dependent
-
Line monitoringConfigurable input-voltage thresholds
-
Compatible terminationsT9801/T9802/T9803
-
Module arrangementSimplex, dual or TMR with matching terminations
-
Status indicationLocal module and channel status indicators
-
Module protectionIndependent watchdog and shutdown mechanism
View all additional
Alternative Names
AADvance T9401 digital input
ICS Triplex T9401 8 channel module
T9401 digital input I/O
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
AADVANCE EQUIPMENT
Match T9401 to the documented AADvance configuration
T9401 belongs to the AADvance platform and mounts on a compatible T9300 I/O base with the correct termination assembly. It does not fit a Trusted module slot.
The documented simplex, dual or TMR arrangement depends on the selected termination and module population. Match T9801/T9802/T9803 and the required channel count to the installed design.
Verify the field voltage, configured bands, filtering and input slew limits for the approved field circuit.
Features:
- 8-channel digital input role
- Matched AADvance termination required
- Configuration-dependent redundancy
The ICS Triplex T9401 8 channel digital input module requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Preserve the full T9401 identity, supplied hardware revision and firmware. Similar AADvance numbers and matching mechanical dimensions do not establish functional interchangeability.
Check the T9801/T9802/T9803 termination, coding pegs, field wiring and application configuration before removing the installed unit. Record the existing module label before it becomes inaccessible.
Use the controlled manufacturer replacement procedure and site safety plan. The module locking mechanism is a power interlock; online replacement permissions depend on the complete operating arrangement.
Features:
- Verify exact hardware and firmware
- Match terminations and field wiring
- Follow the approved changeover plan
The ICS Triplex T9401 8 channel digital input module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T9401 8 channel digital input module must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T9401
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is T9401?
It is an AADvance digital input module with 8 channels. It is not a Trusted I/O module; verify the installed platform before ordering. -
What signals does this module accept?
It measures input voltage from 0 to 32 V DC and reports both channel state and analogue voltage data to the processor. Match the configured bands to the approved field circuit. -
How are field wiring faults detected?
Configurable voltage bands support line monitoring. Use the manufacturer circuit appropriate to the field contacts, supply and monitoring resistors; voltage measurement alone does not establish a complete safety function. -
What does the 6 ms figure describe?
It is the sample update interval without filtering, not a guaranteed end-to-end controller scan time or safety response time. -
Which termination assemblies are used?
The handbook identifies T9801/T9802/T9803 for this module family. Select the exact assembly and populated channel arrangement for the intended simplex, dual or TMR configuration. -
Does a module rating establish the safety level of the complete installation?
No. The achieved safety integrity depends on the full configuration, field devices, diagnostics and approved safety design. This product page is not a safety certification or design approval. -
What must be checked before replacing the module?
Record the exact model, hardware revision and firmware. Verify the termination coding, field circuits, redundancy and approved changeover procedure; do not assume an online replacement is safe for every configuration.
READY TO VERIFY YOUR PART?
Get a T9401 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
