PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
T9300 AADvance three-position I/O base unit
T9300 is an AADvance I/O base unit with positions for up to three I/O modules and their associated termination assemblies. Its passive backplane connects the modules to the processor base through command signals, response signals and controller power.
The base mounts on standard DIN rails or a flat panel. Adjacent bases join through their mating connectors and retaining clips, while the documented expansion cable links separate rows. Module selection and termination arrangements determine the available field interfaces and redundancy.
The base mounts on standard DIN rails or a flat panel. Adjacent bases join through their mating connectors and retaining clips, while the documented expansion cable links separate rows. Module selection and termination arrangements determine the available field interfaces and redundancy.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T9300 Fits Across Industrial Production Fields
Used in oil, chemical and power operations where the installed equipment and approved controller configuration are compatible.
-
01 · OIL & GAS
Oil Production, Gas Processing and Petroleum Transportation Facilities
Offshore production platforms and onshore facilities processing crude oil.Natural gas processing plants and pipelines transporting petroleum products. -
02 · CHEMICAL PROCESSING
Chemical Manufacturing, Batch Processing and Industrial Formulation Facilities
Continuous production facilities manufacturing bulk chemicals and industrial materials.Batch production areas handling chemical blending and product formulation. -
03 · POWER GENERATION
Gas Turbine Generation and Combined Cycle Power Stations
Natural gas turbine generators supplying electricity to utility networks.Combined cycle power stations integrating gas and steam generation.
Technical specifications for T9300
-
Product ModelT9300
-
Product ParametersThree Way I/O Base
-
ManufacturerICS Triplex
-
I/O module positions1, 2 or 3 modules
-
Backplane typePassive
-
Supply requirementRedundant nominal 24 V DC; 18 to 32 V DC from the processor base
-
Command busesOne
-
Response buses24
-
I/O buses per controllerTwo
-
Base units per busEight
-
I/O modules per bus24 individual modules; grouping reduces the number of groups
-
Expansion connectionAdjacent mating bases or T9310 cable assembly
-
Mounting provisionsStandard DIN rails or screw fixing to a panel
View all additional
Alternative Names
AADvance T9300 I/O base
ICS Triplex T9300 backplane
T9300 three position base unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
AADVANCE EQUIPMENT
Match T9300 to the documented AADvance configuration
T9300 provides the passive mounting and backplane connection for AADvance I/O modules. Field wiring uses the matching termination assemblies required by those modules.
The base receives controller power and command and response links from the processor base or an upstream I/O base. Verify the complete left-to-right bus layout and cable-connected rows.
Each bus supports eight bases and twenty-four individual modules. Redundant groups consume multiple physical module positions and must be counted accordingly.
Features:
- Three I/O module mounting positions
- Signal-specific termination selection
- Bus population and expansion checks
The ICS Triplex T9300 three way i/o base requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match T9300 and the installed I/O-base layout. A T9100 processor base or similar-looking backplane from another platform is not an equivalent replacement.
Record the module and termination positions, bus connections and cable routes before removal. Inspect all mating connectors, retaining clips and protection covers.
Use the site isolation and recommissioning procedure for base work. Verify the complete bus and field configuration before restoring affected production functions.
Features:
- Identify the correct I/O base
- Preserve module and termination positions
- Validate the complete I/O bus after work
The ICS Triplex T9300 three way i/o base requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T9300 three way i/o base must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromShip-from location unconfirmed
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T9300
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is T9300?
It is the AADvance three-position I/O base unit. It provides mounting and passive backplane connections for I/O modules and their associated termination assemblies. -
Does three-position mean three field channels?
No. It refers to I/O module positions. The installed module models and terminations determine the field-channel count and signal types. -
Can a processor module be installed on this base?
The manufacturer assigns T9110 processors to the T9100 processor base. T9300 is the I/O base and must not be treated as an interchangeable processor base. -
How are additional I/O bases connected?
Adjacent bases use their mating connectors and retaining clips. Separate rows can use the documented T9310 expansion assembly, with the correct bus routing and installation requirements. -
Is each I/O bus rated for twenty-four redundant groups?
No. The handbook specifies twenty-four individual modules per bus. It gives examples of twelve dual or eight triple groups; the group count depends on module population. -
Where does the base receive power?
It receives redundant nominal 24 V DC power through the controller backplane from the processor base. Follow the documented base and expansion wiring arrangement. -
Are I/O modules and terminations included?
Only if explicitly listed in the quotation. Confirm the base, required signal modules, matching terminations, expansion cable and mounting accessories separately.
READY TO VERIFY YOUR PART?
Get a T9300 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
