PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
T9310-02 two-meter cable for AADvance backplane expansion
T9310-02 is the two-meter AADvance backplane expansion cable assembly. It links an I/O base to another I/O base or to the processor base, carrying the command and response signals together with the controller power connections.
The documented assembly comprises a cable with multiway plugs and two adaptors. Retaining screws secure the connections, while screening and the specified ferrites form part of the installation arrangement. Cable routing and connector orientation must follow the complete manufacturer drawings.
The documented assembly comprises a cable with multiway plugs and two adaptors. Retaining screws secure the connections, while screening and the specified ferrites form part of the installation arrangement. Cable routing and connector orientation must follow the complete manufacturer drawings.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T9310-02 Fits Across Industrial Production Fields
Used in oil, chemical and power operations where the installed equipment and approved controller configuration are compatible.
-
01 · CHEMICAL PROCESSING
Continuous Chemical Production and Batch Manufacturing Process Areas
Bulk chemical production plants handling continuous industrial processing operations.Specialty chemical facilities combining batch preparation and formulation operations. -
02 · POWER GENERATION
Natural Gas Electricity Production and Utility Generation Facilities
Utility generating stations producing electricity from natural gas combustion.Combined cycle facilities combining turbine generation with steam production. -
03 · OIL & GAS
Hydrocarbon Production, Refining and Petroleum Transport Operating Areas
Oil extraction facilities handling production and initial hydrocarbon processing.Gas processing facilities and petroleum terminals serving transportation networks.
Technical specifications for T9310-02
-
Product ModelT9310-02
-
Product ParametersTwo Meter Expansion Cable
-
ManufacturerICS Triplex
-
Cable length2 m; 78.74 in.
-
Assembly componentsExpansion cable and two adaptors
-
Base compatibilityT9300 I/O bases and T9100 processor-base I/O Bus 2
-
Signal pathsCommand bus and 24 I/O response buses
-
Power pathsBackplane 0 V return and redundant nominal 24 V DC feeds
-
Cable constructionScreened cable with multiway plugs
-
Connection retentionRetaining screws and socket cap screws
-
Ferrite positioning50 mm from each cable end; secured with ties on both sides
View all additional
Alternative Names
AADvance T9310-02 expansion cable
ICS Triplex T9310-02 backplane cable
T9310 two meter cable assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
AADVANCE EQUIPMENT
Match T9310-02 to the documented AADvance configuration
T9310-02 extends the AADvance backplane between the documented processor and I/O base arrangements. It is not a substitute for an Ethernet or field-device cable.
The assembly carries command and response links, the backplane return and redundant controller power. Verify the base population and complete I/O-bus layout before routing the cable.
Use the OEM drawing for the selected connection, including the required adaptors, ferrites and retention. Do not derive an endpoint orientation or pinout from a simplified relationship diagram.
Features:
- Documented AADvance base endpoints
- Backplane communication and power paths
- OEM routing and ferrite requirements
The ICS Triplex T9310-02 two meter expansion cable requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete T9310-02 identity, cable length and installed base arrangement. Similar connectors or an incomplete family name do not establish compatibility.
Record both cable endpoints and the approved routing before removal. Inspect the cable, adaptors, ferrites and retaining hardware for damage or missing components.
Use the site isolation plan and original connection drawings. After work, verify the affected I/O bus and controlled process functions before operational release.
Features:
- Preserve the complete length suffix
- Check adaptors and ferrites
- Validate the affected I/O bus
The ICS Triplex T9310-02 two meter expansion cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T9310-02 two meter expansion cable must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T9310-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is T9310-02?
It is the two-meter AADvance backplane expansion cable assembly, comprising a cable and two adaptors in the manufacturer parts list. -
What does the suffix identify?
The manufacturer parts list identifies T9310-02 as the two-meter backplane expansion cable. Preserve the complete suffix when checking a replacement. -
Which bases can the assembly connect?
The manufacturer describes links between T9300 I/O bases and a link from T9100 processor-base I/O Bus 2 to a T9300 I/O base. Use the complete drawing for the selected arrangement. -
Is this an Ethernet patch cable?
No. The documented function is backplane expansion, carrying command and I/O response paths together with controller power and return. Do not substitute an Ethernet cable. -
Are ferrites required?
The build manual specifies the supplied snap-on ferrites at 50 mm from each end, secured by cable ties on both sides. Verify the complete installation requirements and supplied accessories. -
Can the cable be disconnected during operation?
Do not infer that permission from the expansion function. The assembly carries controller power and I/O communication; follow the approved isolation and site maintenance procedure. -
Does this summary provide connector pin assignments?
No. Use the original manufacturer connection drawings and approved site records for endpoint orientation and installation. This summary is not a pinout or field-wiring instruction.
READY TO VERIFY YOUR PART?
Get a T9310-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
