PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Rack shelf connections for three compatible power packs
ICS Triplex T8240C is a Trusted power shelf for up to three compatible power packs. The documented shelf design occupies one rack unit in a nineteen-inch frame and provides retained mains connections, DC output terminals and a rear diagnostic interface.
Its usable output capacity depends on the installed packs, selected voltage and redundancy arrangement. The Power Port supports alarm connections and the approved current-sharing interface. Verify support brackets, supplied accessories, busbars and applicable manufacturer safety guidance before replacing the shelf.
Its usable output capacity depends on the installed packs, selected voltage and redundancy arrangement. The Power Port supports alarm connections and the approved current-sharing interface. Verify support brackets, supplied accessories, busbars and applicable manufacturer safety guidance before replacing the shelf.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T8240C Fits in Industrial Production Facilities
Use spans process industries and utility facilities, subject to the installed hardware, connections and approved configuration.
-
01 · OIL & GAS
Petroleum Production Operations and Gas Treatment Plant Facilities
Petroleum production operations with transfer facilities and separation equipment.Gas treatment plant facilities with compression and condensate handling. -
02 · POWER GENERATION
Electricity Generating Stations and Power Production Service Areas
Electricity generating stations with turbine equipment and boiler auxiliaries.Power production service areas with fuel storage and pumps. -
03 · CHEMICAL PROCESSING
Chemical Processing Facilities and Industrial Product Manufacturing Plants
Chemical processing facilities with reaction vessels and ingredient transfer.Industrial product manufacturing plants with mixing and storage equipment.
Technical specifications for T8240C
-
Product ModelT8240C
-
Product ParametersTrusted power distribution shelf
-
ManufacturerICS Triplex
-
Rack format19-inch frame, 1U shelf
-
Power-pack positionsUp to three; T8231 or T8232 per approved output configuration
-
Configured shelf capacityUp to 2250 W total or 1500 W with N+1 redundancy
-
AC supply inlets3 x clip-retained IEC 60320 connectors
-
DC output terminals2 terminal blocks, each with three M4 screw connections
-
Output grounding referenceV+ and V- float relative to frame ground; apply the approved grounding design
-
Diagnostic Power PortT8243; external 24 V supply required
-
Monitoring interfaceOptional rear 25-pin female DSB connector
-
Current-sharing cableTC-323; only for the documented common-busbar arrangement
-
Shelf supportT8247 bracket pair supports up to four shelves
-
Shelf address selectionPower Port jumpers J1/J2; up to four shelf addresses
-
Operating temperature0 to +60 degrees C; fitted power-pack derating applies
-
Relative humidity10-95%, noncondensing
View all additional
Alternative Names
T8240C Trusted power distribution shelf
ICS Triplex T8240C power-pack mounting shelf
T8240C Trusted rack power distribution chassis
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
TRUSTED EQUIPMENT
Match T8240C to the documented Trusted configuration
T8240C is the C-order shelf paired with T8240 in RN007A. It supports the documented pack mounting, DC distribution and Power Port connections. Fitted packs determine conversion and capacity; an empty shelf is not a standalone power supply.
Match the 19-inch rack and T8247 support-bracket drawing; confirm front and rear support. Verify the fitted pack voltage, approved load and redundant capacity. An empty shelf has no conversion output.
Confirm the Power Port supply, alarm wiring and address jumpers. TC-323 must not join separate A/B busbars.
Features:
- 19-inch, 1U rack format
- Three power-pack positions
- T8243 Power Port arrangement
The ICS Triplex T8240C trusted power distribution shelf requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record the complete T8240C identity and compare its hardware revision with the installed item. Verify T8240C, actual revision, shelf date code, support brackets, fitted packs and busbar arrangement. RN007A pairs the base and C orders for its stated release. Check PSA 2014-08-003 applicability with the manufacturer rather than inferring exemption from the C suffix.
Match the 19-inch rack and T8247 support-bracket drawing; confirm front and rear support. Confirm the Power Port supply, alarm wiring and address jumpers. TC-323 must not join separate A/B busbars.
Use the controlled manufacturer procedure and the approved maintenance plan. PSA 2014-08-003 names T8230/T8240 shelves with date codes 1329-1401. Check applicability for the actual C-order shelf with the manufacturer; do not presume either exemption or completed remediation.
Features:
- Complete order identity retained
- Companion equipment and configuration checked
- No unconditional substitution claim
The ICS Triplex T8240C trusted power distribution shelf requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T8240C trusted power distribution shelf must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T8240C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the catalogue list establish what is supplied with T8240C?
No. RN007A explicitly pairs T8240/T8240C, and the family table lists a Power Port, ten-way connector, three mains plugs and retaining clips. Confirm the actual quoted accessories and installed hardware; do not assume power packs or brackets are included. -
Does the shelf determine its DC output voltage?
No. The installed power packs and approved configuration determine the output. The range includes nominal 24 Vdc and 28 Vdc packs; the empty shelf provides mounting and connections rather than AC-to-DC conversion. -
How much power can a populated shelf provide?
The manual describes up to 2250 W total, or up to 1500 W with N+1 redundancy, depending on the fitted packs. Available power must also satisfy the specified load and thermal conditions. -
Which brackets support the power shelf?
The product range identifies T8247 as the support-bracket pair for up to four shelves. Match the actual rack and complete front/rear mounting arrangement to the original assembly drawing before installation. -
How are AC input and DC output connected?
The shelf uses three mechanically retained IEC 60320 inputs and two DC terminal blocks, each with three M4 screws. The manufacturer specifies ring connections to distribution busbars; use the original wiring drawing and qualified-personnel procedure. -
What selects the shelf address for power monitoring?
J1 and J2 on the Power Port select the shelf address. The documented arrangement supports up to four shelves and twelve power packs with the optional Power Controller. Follow the manufacturer address and power-up sequence. -
Can TC-323 join separate A and B power supplies?
No. It must not connect separate A/B supplies or shelves serving separate busbars. The resulting attempt to share current can damage the packs and shelf sensing circuits; leave unused connectors tied back. -
Does a C suffix establish exemption from the shelf safety advisory?
No exemption is established here. PSA 2014-08-003 names T8230/T8240 shelves with date codes 1329-1401 and identifies possible internal busbar shorting during pack insertion or removal. Confirm applicability and remediation for the actual shelf with the manufacturer; the notice identifies no workaround.
READY TO VERIFY YOUR PART?
Get a T8240C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
