PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Forty fused field connections for digital input signals
ICS Triplex T8800C belongs to the Trusted forty-channel digital input field termination family. It connects two-wire field devices to the associated digital input module, carrying their signals through the matched cable while providing individually fused field power connections for each channel.
Each channel has fused field power, and onboard LEDs indicate supply integrity. Dual supply connections are combined through diodes, while a SmartSlot connection supports the documented spare-input-module arrangement. The assembly provides field termination rather than digital input processing.
Each channel has fused field power, and onboard LEDs indicate supply integrity. Dual supply connections are combined through diodes, while a SmartSlot connection supports the documented spare-input-module arrangement. The assembly provides field termination rather than digital input processing.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T8800C Fits in Industrial Production Facilities
Use spans process industries and utility facilities, subject to the installed hardware, connections and approved configuration.
-
01 · OIL & GAS
Petroleum Production Sites and Gas Processing Plant Operations
Petroleum production sites with separator vessels and transfer pumps.Gas processing operations with compression equipment and storage areas. -
02 · POWER GENERATION
Power Production Facilities and Generating Station Auxiliary Areas
Power production facilities with boiler equipment and turbine services.Generating station auxiliary areas with pumps and fuel facilities. -
03 · CHEMICAL PROCESSING
Chemical Manufacturing Facilities and Industrial Process Production Areas
Chemical manufacturing facilities with reaction equipment and process vessels.Industrial process production areas with blending and storage equipment.
Technical specifications for T8800C
-
Product ModelT8800C
-
Product ParametersTrusted digital input termination
-
ManufacturerICS Triplex
-
Input termination capacity40 digital input channels
-
Field device connectionTwo-wire field circuits
-
Field supply voltage18-32 Vdc; nominal 24 Vdc
-
Per-channel protection40 individual 50 mA field supply fuses
-
Dual feed arrangementTwo field feeds combined through on-board diodes
-
Supply indicationGreen LED indicates field supply presence
-
Module cable connectorSK1, 96-way socket for the documented digital input cable
-
SmartSlot connector scopeSK2, 96-way socket; unused with SmartSlot Version 2
-
Field power terminalFive-way PWR TB connection
-
Associated input moduleTrusted TMR 24 Vdc digital input module T8403
-
DIN rail mountingTS32 or TS35; horizontal or vertical
-
Operating temperature0 to +60 degrees C
-
Storage and humidity-25 to +70 degrees C; 10-95% RH, noncondensing
-
Equipment dimensions111 x 335 x 51 mm (H x W x D)
-
Equipment mass900 g; not packaged or shipping gross weight
View all additional
Alternative Names
T8800C Trusted digital input termination
ICS Triplex T8800C 40-channel digital input FTA
T8800C Trusted fused digital field terminal assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
TRUSTED EQUIPMENT
Match T8800C to the documented Trusted configuration
T8800C terminates field digital signals for the documented T8403 input arrangement. The associated input module interprets the signals; the FTA supplies terminals, fused field feeds and cable connections. Required line-monitoring components depend on the approved field-loop design.
Match all forty digital channels, loop components and two-wire connections. Verify dual field feeds, polarity and the specified individual 50 mA fuses.
Confirm DIN rail mounting and documented operating environment.
Features:
- 40 two-wire digital input channels
- Individual 50 mA field supply fuses
- Diode-combined dual field power feeds
The ICS Triplex T8800C trusted digital input termination requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record the complete T8800C identity and compare its hardware revision with the installed item. Match the complete T8800C identity, input cable, terminal schedule, field power and SmartSlot generation. Do not replace it with a non-incendive or analogue-input termination assembly merely because the channel count or mounting is similar.
Match all forty digital channels, loop components and two-wire connections. Confirm DIN rail mounting and documented operating environment.
Use the controlled manufacturer procedure and the approved maintenance plan. The green indicator confirms supply presence, not the correct state of every field circuit. Verify individual channels and the associated input module diagnostics.
Features:
- Complete order identity retained
- Companion equipment and configuration checked
- No unconditional substitution claim
The ICS Triplex T8800C trusted digital input termination requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T8800C trusted digital input termination must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T8800C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is T8800C a complete digital input module?
No. It is a field termination assembly for the documented T8403 digital input arrangement. It provides terminals, fused field feeds and cable connections; the associated module interprets the incoming digital signals. -
How are the two field supplies connected internally?
The manufacturer describes dual nominal 24 Vdc feeds combined through on-board diodes. A green LED indicates supply presence, and each field channel receives power through its own 50 mA fuse. -
Does the 50 mA fuse rating describe signal measurement?
No. It describes individual field supply protection, not analogue measurement resolution or a programmable current output. Select the field device and loop components using the complete input module and FTA instructions. -
Can SK2 be used for every SmartSlot generation?
No. The FTA SmartSlot connector SK2 is associated with Version 1 and is not used where SmartSlot Version 2 is employed. Match the installed cable arrangement and procedure before replacement. -
Does line monitoring work without checking field components?
Do not assume so. The manufacturer states that line-monitoring components, when required, establish thresholds used by the input module for field-loop status. Check the approved circuit and module configuration rather than assigning that function to the FTA alone. -
Are auxiliary channels 0 and 41 additional usable inputs?
No. The auxiliary input table explicitly marks those channels as not configured. The specified termination capacity remains forty digital input channels. -
Which environmental and shipping values apply?
The manual specifies operation from 0 to +60 degrees C and a 900 g equipment mass. That mass and the equipment outline are not shipping values; packed dimensions and gross weight must be checked separately. -
Does the C suffix establish a hardware revision?
No. PC002G allows a C suffix for T8xxx catalogue numbers, but the actual supplied board revision and approvals must be checked separately. Preserve the complete T8800C identity without treating it as a revision or substitution guarantee.
READY TO VERIFY YOUR PART?
Get a T8800C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
T8800CTrusted digital input terminationManufacturer: ICS TriplexView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
