PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
T9852 dual termination for eight digital output channels
T9852 is the AADvance dual termination assembly for eight digital output channels. It connects two compatible output modules to the field wiring and accepts two nominal 24 V DC sources for the field power arrangement.
The assembly includes two replaceable 10 A fuses, one for each field-power source. Those fuses are part of the termination hardware and do not replace the separate upstream field-protection requirements specified by the manufacturer for the complete installation.
The assembly includes two replaceable 10 A fuses, one for each field-power source. Those fuses are part of the termination hardware and do not replace the separate upstream field-protection requirements specified by the manufacturer for the complete installation.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T9852 Fits Across Industrial Production Fields
Used in oil, chemical and power operations where the installed equipment and approved controller configuration are compatible.
-
01 · POWER GENERATION
Electricity Generation at Gas Fired and Combined Cycle Facilities
Gas fired generating stations supplying electricity for industrial consumers.Combined cycle generating facilities producing power for utility networks. -
02 · OIL & GAS
Petroleum Extraction, Gas Treatment and Hydrocarbon Processing Facilities
Offshore petroleum platforms handling extraction and initial production processing.Natural gas treatment plants and refineries processing hydrocarbon feedstocks. -
03 · CHEMICAL PROCESSING
Bulk Chemical Manufacturing and Specialty Product Production Areas
Continuous chemical manufacturing lines producing basic industrial chemical feedstocks.Batch blending facilities preparing formulated chemicals and specialty products.
Technical specifications for T9852
-
Product ModelT9852
-
Product ParametersDual Digital Output Termination Assembly
-
ManufacturerICS Triplex
-
Field output connections8
-
Module arrangementDual
-
Supported output modulesTwo T9451 modules
-
Field power inputsTwo nominal 24 V DC sources
-
Integral field-supply protectionTwo replaceable 10 A fuses; one per source; T9902 replacement
-
Mounting baseT9300 I/O base
-
Terminal-screw tightening0.5 Nm minimum; follow the complete OEM procedure
-
Unpacked assembly dimensions132 mm high x 84 mm wide
-
Bare assembly mass260 g; not gross shipping weight
View all additional
Alternative Names
AADvance T9852 digital output TA
ICS Triplex T9852 output termination
T9852 field output terminal assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
AADVANCE EQUIPMENT
Match T9852 to the documented AADvance configuration
T9852 connects the dual T9451 output arrangement to eight field-output circuits. It must be installed on the documented base with correct module coding.
Two nominal 24 V DC sources provide field power through the termination. Each has an integral 10 A fuse, while upstream protection and the supply arrangement must meet the complete manufacturer requirements.
Verify field-load wiring, protection and the configured output behavior before commissioning. Fuse ratings do not establish output-channel capacity, diagnostic performance or a safety integrity level.
Features:
- Dual T9451 output population
- Dual field-power connection review
- Separate supply and load protection checks
The ICS Triplex T9852 dual digital output termination assembly requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the exact T9852 identity and dual output arrangement. A similar terminal assembly or common pinout does not by itself establish replacement equivalence.
Record both power sources, field-output wiring and protection before removal. Inspect connectors, retaining features, coding and fuse condition before installation.
Isolate and recommission under the approved site procedure. Check intended output states, diagnostic reporting and the process release conditions before returning equipment to service.
Features:
- Match the exact output termination
- Record field power and load circuits
- Verify outputs under controlled commissioning
The ICS Triplex T9852 dual digital output termination assembly requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T9852 dual digital output termination assembly must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromShip-from location unconfirmed
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T9852
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is T9852?
It is the AADvance dual termination assembly for eight digital output channels. It provides the field interface for the selected T9451 output module arrangement. -
How many output modules are supported?
The manufacturer lists two output modules for T9852. Verify the intended dual configuration and approved project. -
Why are there two field-power fuses?
The terminal blocks accept two nominal 24 V DC field-power sources. Each source has its own replaceable 10 A fuse on the termination assembly. -
Do the 10 A fuses establish a 10 A output-channel rating?
No. They protect the field-supply paths and are not a per-channel current rating. The installed output module and approved circuit determine the allowable output load. -
Are the integral fuses the only field protection required?
No. The build manual also specifies upstream protection or the permitted Class 2 supply arrangement for the complete installation. Consult the original field-circuit pages rather than relying only on the termination fuse value. -
Which replacement fuse is documented?
The manufacturer lists T9902 for T9851 and T9852 output terminations. Match the full fuse specification and approved maintenance procedure before replacement. -
Are output modules or power supplies included?
Only if the quotation explicitly lists them. The stated component dimensions and bare mass are not packed dimensions or gross shipping weight.
READY TO VERIFY YOUR PART?
Get a T9852 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
