PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
T9100 AADvance base unit for processor mounting and connections
T9100 is the AADvance processor base unit for one, two or three processor modules. It provides their electrical connections and the links to the remaining controller equipment, with mounting provisions for standard DIN rails or a flat panel.
The base retains individual processor IP addresses in its factory-installed BUSP component, supporting processor replacement without re-entering those addresses. It carries Ethernet, serial, redundant power and program-enable connections. Processor population, wiring and the approved project determine the complete installed arrangement.
The base retains individual processor IP addresses in its factory-installed BUSP component, supporting processor replacement without re-entering those addresses. It carries Ethernet, serial, redundant power and program-enable connections. Processor population, wiring and the approved project determine the complete installed arrangement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T9100 Fits Across Industrial Production Fields
Used in oil, chemical and power operations where the installed equipment and approved controller configuration are compatible.
-
01 · POWER GENERATION
Electricity Generation at Gas Fired and Combined Cycle Facilities
Gas fired generating stations supplying electricity for industrial consumers.Combined cycle generating facilities producing power for utility networks. -
02 · OIL & GAS
Petroleum Extraction, Gas Treatment and Hydrocarbon Processing Facilities
Offshore petroleum platforms handling extraction and initial production processing.Natural gas treatment plants and refineries processing hydrocarbon feedstocks. -
03 · CHEMICAL PROCESSING
Bulk Chemical Manufacturing and Specialty Product Production Areas
Continuous chemical manufacturing lines producing basic industrial chemical feedstocks.Batch blending facilities preparing formulated chemicals and specialty products.
Technical specifications for T9100
-
Product ModelT9100
-
Product ParametersAADvance Processor Base Unit
-
ManufacturerICS Triplex
-
Compatible processorT9110
-
Processor positions1, 2 or 3 modules
-
Supported I/O base units16; eight on each I/O bus
-
Supply requirementRedundant nominal 24 V DC; 18 to 32 V DC
-
Power connectorsTwo 3-way connectors, PWR-1 and PWR-2
-
Power conductor capacity3.3 mm2 maximum, 12 AWG; 7 mm strip length
-
Ethernet connectionsSix shielded RJ45 sockets; two per processor
-
Serial connectionsSix 5-way connectors; two per processor
-
Serial conductor capacity1.31 mm2 maximum, 16 AWG; 7 mm strip length
-
KEY connectorProgram Enable Key connection
-
FLT connectorNot used
-
Processor IP retentionIndividual addresses stored in the BUSP component
-
Mounting provisionsStandard DIN rails or screw fixing to a panel
View all additional
Alternative Names
AADvance T9100 processor base
ICS Triplex T9100 base unit
T9100 CPU mounting base
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
AADVANCE EQUIPMENT
Match T9100 to the documented AADvance configuration
T9100 supports the documented T9110 processor population and connects it to AADvance I/O equipment. Processor modules and I/O bases have different mounting roles.
The base exposes two Ethernet and two serial connections for each processor position, along with redundant power and program-enable connections. Verify the actual installed communication arrangement.
Retained IP addresses belong to the base BUSP component. Base replacement requires review of the intended network settings, grounding, power feeds and controller commissioning procedure.
Features:
- T9110 processor mounting positions
- Two I/O-bus expansion paths
- Power, network and grounding checks
The ICS Triplex T9100 aadvance processor base unit requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Confirm T9100 and the installed base arrangement before replacement. A T9300 I/O base is not an interchangeable processor base, even though both belong to AADvance.
Record the processor identities, network settings and every external connection. Verify the new base coding, connectors and physical mounting against the controlled drawings.
Use the approved isolation and recommissioning procedure. Replacing a processor base is not equivalent to exchanging a single redundant processor module.
Features:
- Distinguish processor and I/O bases
- Record IP settings and connections
- Isolate and recommission under site control
The ICS Triplex T9100 aadvance processor base unit requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T9100 aadvance processor base unit must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T9100
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is T9100?
It is the AADvance processor base unit. It supports the processor modules and provides their electrical and external connections; it is not itself a T9110 processor. -
How many processors can it support?
The documented arrangement uses one, two or three T9110 processors. The selected population and approved project determine redundancy and safety behavior. -
Where are processor IP addresses retained?
The base holds each processor address separately in its factory-installed BUSP component. When replacing the base itself, verify the network configuration and manufacturer procedure instead of assuming the old addresses automatically transfer. -
Can the base be mounted without DIN rails?
The manufacturer also provides screw-fixing holes for mounting to a flat panel. Use the complete build manual for spacing, enclosure, protective grounding and installation requirements. -
Does the FLT connector provide a usable fault output?
The handbook marks FLT as not used. Do not assign an unsupported external function to that connector. -
How many I/O base units are supported?
The specification lists sixteen I/O base units, with eight on each I/O bus. Check the complete bus layout, cable arrangement and module population against the project design. -
Are processors, keys or cables included with the base?
Only when the quotation lists them. Confirm the exact base, required processors, program-enable key, cables and accessories before ordering.
READY TO VERIFY YOUR PART?
Get a T9100 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
