PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
T9110 AADvance processor module for configured controllers
T9110 is the central processing module of an AADvance controller. It executes the application through the AADvance Safety Kernel, exchanges data with I/O modules, communicates with other processors and operator interfaces, and initiates periodic controller diagnostics.
The processor incorporates galvanic isolation, supply monitoring and a watchdog to supervise operation. Dual nominal 24 V DC feeds support continued operation after one supply fails. Redundancy, safety performance and replacement procedures depend on the complete controller arrangement and approved configuration.
The processor incorporates galvanic isolation, supply monitoring and a watchdog to supervise operation. Dual nominal 24 V DC feeds support continued operation after one supply fails. Redundancy, safety performance and replacement procedures depend on the complete controller arrangement and approved configuration.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T9110 Fits Across Industrial Production Fields
Used in oil, chemical and power operations where the installed equipment and approved controller configuration are compatible.
-
01 · CHEMICAL PROCESSING
Continuous Chemical Production and Batch Manufacturing Process Areas
Bulk chemical production plants handling continuous industrial processing operations.Specialty chemical facilities combining batch preparation and formulation operations. -
02 · POWER GENERATION
Natural Gas Electricity Production and Utility Generation Facilities
Utility generating stations producing electricity from natural gas combustion.Combined cycle facilities combining turbine generation with steam production. -
03 · OIL & GAS
Hydrocarbon Production, Refining and Petroleum Transport Operating Areas
Oil extraction facilities handling production and initial hydrocarbon processing.Gas processing facilities and petroleum terminals serving transportation networks.
Technical specifications for T9110
-
Product ModelT9110
-
Product ParametersAADvance Processor Module
-
ManufacturerICS Triplex
-
Processor clock400 MHz
-
Boot flash512 kB
-
SRAM512 kB
-
Bulk flash64 MB
-
SDRAM32 MB
-
Internal-event resolution1 ms
-
Event time-stamp accuracyApplication scan
-
Self-test intervalLess than 5.5 hours
-
Supported I/O modules48
-
Module supplyRedundant nominal 24 V DC; 18 to 32 V DC
-
Power dissipation8 W
-
Compatible processor baseT9100
-
Diagnostic protectionInternal tests, watchdog and fault shutdown
-
Galvanic isolationFrom external power supplies and data links
-
CasingNon-flammable plastic
View all additional
Alternative Names
AADvance T9110 processor
ICS Triplex T9110 CPU module
T9110 central processing module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
AADVANCE EQUIPMENT
Match T9110 to the documented AADvance configuration
T9110 processors mount on the T9100 processor base. The base provides the connections to the remaining AADvance equipment and supports the documented processor arrangement.
Application execution, I/O data transfer, processor communication and periodic diagnostics are processor duties. The installed I/O population and project determine the complete control function.
Use the same documented firmware build within a multiprocessor group. Check the application, network configuration, redundancy and site safety requirements before commissioning.
Features:
- Dedicated AADvance processor role
- T9100 processor base required
- Firmware and project compatibility checks
The ICS Triplex T9110 aadvance processor module requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match T9110, the hardware revision, firmware and approved project before replacing the installed processor. A similar front panel or different platform CPU is not evidence of interchangeability.
Record the module label and location before installation conceals the side labels. Inspect the base coding and connectors; the locking mechanism must reach its documented locked position.
Follow the manufacturer and site changeover procedure. Online replacement described for redundant arrangements is not blanket permission for live replacement in every operating state.
Features:
- Match exact processor identity
- Verify group firmware and project
- Use the approved redundancy procedure
The ICS Triplex T9110 aadvance processor module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T9110 aadvance processor module must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T9110
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is T9110?
It is the central processing module of an AADvance controller. It runs application logic, exchanges I/O data and performs controller communication and diagnostics. -
Which base unit accepts this processor?
The processor mounts on a T9100 processor base. I/O modules use a different base; a Trusted processor slot is not an equivalent mounting position. -
What does the 1 ms event specification mean?
It is the resolution for internal sequence-of-events variables. The handbook separately describes timestamp accuracy as the application scan; it is not a claim of a 1 ms total safety response. -
Must multiple processors have the same firmware?
Yes. The build manual requires the same firmware build when more than one processor is installed. Verify the actual supplied revision and firmware rather than inferring them from the order code. -
Can the processor always be replaced online?
No. The handbook describes online replacement in configured two- or three-processor arrangements. The approved site procedure, fault state and redundancy must be checked before any changeover. -
Does this module alone establish a SIL 3 installation?
No. Safety integrity depends on processor population, the complete safety design and documented operating constraints. A single module order does not establish the certification or achieved safety level of the installed function. -
Are project files or software licences included?
Only if expressly listed in the quotation. Confirm the existing project, engineering software and licence requirements independently before commissioning a replacement.
READY TO VERIFY YOUR PART?
Get a T9110 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
