PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Triplicated processor-to-I/O links for Regent Plus chassis
ICS Triplex T7310 is an I/O transceiver module for Regent Plus equipment. It provides the communication path between controller processors and I/O chassis modules, with three transceivers occupying the three leftmost positions of each I/O chassis.
Each transceiver communicates with one processor and carries one leg of the triplicated I/O Safetybus. Chassis addressing directs the commands to the intended I/O modules, while loopback tests and front-panel active and fault indicators support status checking and maintenance.
Each transceiver communicates with one processor and carries one leg of the triplicated I/O Safetybus. Chassis addressing directs the commands to the intended I/O modules, while loopback tests and front-panel active and fault indicators support status checking and maintenance.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T7310 Fits in Industrial Production Facilities
Use spans process industries and utility facilities, subject to the installed hardware, connections and approved configuration.
-
01 · OIL & GAS
Hydrocarbon Production Facilities and Pipeline Transportation Operations
Petroleum production installations and compressor stations along gas pipelines.Hydrocarbon storage terminals and processing units serving refinery operations. -
02 · POWER GENERATION
Electricity Generation Plants and Station Utility Equipment
Generating plant fuel equipment and power station auxiliary machinery.Utility generation facilities with boiler and turbine auxiliary equipment. -
03 · CHEMICAL PROCESSING
Industrial Chemical Facilities and Continuous Production Equipment
Chemical production vessels and associated liquid material transfer equipment.Batch processing facilities handling ingredients for industrial chemical production.
Technical specifications for T7310
-
Product ModelT7310
-
Product ParametersRegent Plus I/O transceiver module
-
In stock1 unit
-
ManufacturerICS Triplex
-
I/O interfaceOne leg of triplicated I/O Safetybus
-
Chassis quantity3 transceivers per I/O chassis
-
Installed positionsThree leftmost I/O chassis slots
-
Processor associationEach transceiver communicates with one controller processor
-
Power arrangementEach transceiver receives power from one of three I/O power supplies
-
Heat dissipation8 W; 27 BTU/hour
-
Operating temperature0 to +60 degrees C
-
Storage temperature-40 to +85 degrees C
-
Humidity0-95% RH, noncondensing
-
Vibration+/-0.15 mm at 10-55 Hz
-
Operating shock15 g, half-sine, 11 ms
-
Status indicationACTIVE green and FAULT red
-
Periodic calibrationNo periodic maintenance or calibration specified
View all additional
Alternative Names
T7310 Regent Plus I/O transceiver module
ICS Triplex T7310 I/O Safetybus interface
T7310 Regent + Plus processor-to-I/O transceiver
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
REGENT + PLUS EQUIPMENT
Match T7310 to the documented Regent + Plus configuration
T7310 transfers processor commands and I/O responses over one triplicated Safetybus leg. It is an I/O-chassis transceiver, not a Trusted main processor or a field I/O channel module.
Three T7310 transceivers occupy the three leftmost positions of each I/O chassis. Retain the assigned processor, I/O Safetybus leg and corresponding I/O power supply connections.
Use the qualified-personnel Regent Plus procedure for the actual redundant arrangement and process state.
Features:
- One leg of the triplicated I/O Safetybus
- Three transceivers in each I/O chassis
- Processor-to-I/O command and response transfer
The ICS Triplex T7310 regent plus i/o transceiver module requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record the complete T7310 identity and compare its hardware revision with the installed item. Verify T7310, the Regent Plus I/O chassis and the matched triplicated communication and power arrangement. Trusted expansion interfaces are not established substitutes.
Three T7310 transceivers occupy the three leftmost positions of each I/O chassis. Use the qualified-personnel Regent Plus procedure for the actual redundant arrangement and process state.
Use the controlled manufacturer procedure and the approved maintenance plan. Processor-initiated loopback tests check transceiver health. A reported failure produces a controller I/O error indication and a transceiver fault indication.
Features:
- Complete order identity retained
- Companion equipment and configuration checked
- No unconditional substitution claim
The ICS Triplex T7310 regent plus i/o transceiver module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T7310 regent plus i/o transceiver module must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T7310
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does T7310 do?
It interfaces Regent Plus controller processors with the modules in an I/O chassis. Commands and I/O responses travel through the triplicated I/O Safetybus arrangement. -
How many are installed in an I/O chassis?
Three transceivers occupy the three leftmost I/O chassis slots. Each module communicates with one controller processor. -
Is this a Trusted expander processor?
No. The manufacturer identifies T7310 as a Regent Plus I/O transceiver. Trusted expansion processors and interfaces belong to a different documented arrangement. -
Does each transceiver use all three power supplies?
No. Each receives power from one of the three I/O power supplies. The manual describes an interlock that shuts down the associated transceiver if that supply fails. -
How is transceiver health checked?
The controller sends periodic loopback tests. Faults produce a controller I/O module error indication and a transceiver FAULT indication; ACTIVE normally indicates operation. -
Is periodic calibration required?
The manufacturer states that no periodic maintenance or calibration is required and that there are no user-replaceable internal parts. Continue the site maintenance and safety procedures. -
Can replacement be treated as unrestricted live work?
No. The manual describes hot replacement as part of the triplicated configuration. Qualified personnel must follow the approved Regent Plus procedure for the actual process and remaining healthy equipment.
READY TO VERIFY YOUR PART?
Get a T7310 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
