
Command Series Loop Bypass Module
COMMAND SERIES LOOP BYPASS STATION
100 MA AT 24 VDC
2.4 WATTS
INSTRUCTIONS: E92-500-5
I-E92-500-5
Standard Single Monitor Auxiliary Terminal
C-I-CV42C
C-I-CV42C-100T00000
Standard Single Monitor Auxiliary Terminal
Input Signal:4-20 mA (standard)
Output Signal:4-20 mA or voltage output
Power Supply:24 V DCor 100-230 V AC
Power Consumption:2-4 W
Isolation :1500 V AC input/output/power
Accuracy:±0.1% of span
Absolute Pressure Regulator
BCN46215160
Absolute Pressure Regulator
Setpoint Accuracy:±0.5% to ±1% of setpoint
Lockup Accuracy:±1% of setpoint
Supply Pressure Effect:≤ ±0.5% change
SLC01/SLC02/SLC71/SLC72 EPROM Upgrade Kit
Extension Pole for Solo300, 1.2 m
SLC01/SLC02/SLC71/SLC72
EPROM Upgrade Kit
Analog Input Module
ANALOG INPUT MODULE
16 Input 1-5Vdc 4-20mA
Voltage: ±10V, ±5V, 0-10V, 0-5V, 1-5V
Current: 4-20mA, 0-20mA, ±20mA
Resolution:16-bit
Accuracy:±0.05%
Bailey Xycom Keyboard
97511-001
8000-KB7
Bailey Xycom Keyboard
Supply Voltage:5 V DC
Power Consumption:< 500 mA
Protocol USB:HID or PS/2 compatible
Control Unit
CONTROL MODULE
200MA 24VDC
Integrated real-time clock
High-performance RISC processor
Multi-Indicator
Multi-Indicator
Voltage Rating:230V ac
Pilot Light:Colour Red/Green
Lamp Type:LED
Series:E219
Mounting Type:DIN Rail
Narrow Row Recorder
771325CAB42
Narrow Row Recorder
Power Supply:100-240V AC
Power Consumption:< 10 VA
Number of Pens:Typically 1 or 2
Indicator Amplifier Module
768015AAAA2
Indicator Amplifier Module
Power Supply:24 V DC
Power Consumption:< 1.5 W
Voltage (0-10V)
Current (0-20mA, 4-20mA)
Dynamic Compensator
755010AAAA2
Dynamic Compensator
Power Consumption:< 2.5 W (typical)
Input Signals:1-5V, 4-20mA
Function Generator
720518-1
Function Generator
Power Supply:5V DC logic
Power Consumption:< 2.5 W (typical)
Input Signals:1-5V, 4-20mA
Multiplier - Divider
753010AAAA2
Multiplier - Divider
Power Consumption:< 2.5 W
Mathematical Accuracy:±0.1% of result
Update Rate:< 100 ms
Temperature Drift:±50 ppm/°C
MATH MODULE
752220AAAA1
Summer 2-Input
MATH MODULE
5V DC ±5% from baseplate
2 analog inputs via backplane
Scaler Board
752220AAAA1
Scaler Board
PCB Assembly
Power Supply:24V DC ±10%
Power Consumption:2.0W
Current output: ≤600Ω
Voltage output: ≥2kΩ
SLC01/SLC02/SLC71/SLC72 Display Ribbon Cable
6637171A2
SLC01/SLC02/SLC71/SLC72
Display Ribbon Cable
Bailey Net 90 and Infi 90
ETSI Vibration Monitoring Module
VMM01
ETSI Vibration Monitoring Module
ETSI-Electronic Technology Systems
Bailey Infi 90 and Net 90
TSI Termination Unit
TSITU01
TSI Termination Unit
ETSI-Electronic Technology Systems
Bailey Infi 90 and Net 90
Turbine Protection Module
TPSTU02
Turbine Protection Module
Turbine Protection Module TU
SPTPS02 and SPTPS13TPS for Harmony Rack
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.