PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Invensys
- Foxboro
- AI2 2500M/AI2/XXXXX/XXXXXX
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
AI2 2500M/AI2/XXXXX/XXXXXX ANALOGUE INPUT MODULE
Foxboro AI2 2500M/AI2/XXXXX/XXXXXX is a ANALOGUE INPUT MODULE in the Foxboro 2500 process I/O. It is used to acquire field signals and transfer their states or measured values to the controller.
Its documented configuration includes no of channels of 2, input types of TC, RTD, Volts, mA, mV, Potentiometer,Pyrometer, Zirconia probe, mv range of -150mV to +150mV at input impedance >100MΩ, and ma range of -22mA to +22mA with 5Ω burden in theTerminal Unit. During operation, the ANALOGUE INPUT MODULE receives the connected field signals, conditions their states or values and makes them available to the controller.
Its documented configuration includes no of channels of 2, input types of TC, RTD, Volts, mA, mV, Potentiometer,Pyrometer, Zirconia probe, mv range of -150mV to +150mV at input impedance >100MΩ, and ma range of -22mA to +22mA with 5Ω burden in theTerminal Unit. During operation, the ANALOGUE INPUT MODULE receives the connected field signals, conditions their states or values and makes them available to the controller.
BEFORE YOU BUY
Confirm the complete ANALOGUE INPUT MODULE
ACTUAL APPLICATIONS
Application context for AI2 2500M/AI2/XXXXX/XXXXXX
Use this Foxboro component only within its documented system configuration and verified process control architecture.
-
01 · CHEMICAL PROCESSING
Reactor instrumentation control panels
Distributed I/O SystemsTemperature signal conditioningControl valve output processing -
02 · POWER GENERATION
Turbine auxiliary I/O cabinets
Plant Interface SystemsSpeed signal acquisitionAuxiliary relay output control -
03 · OIL & GAS
Compressor skid signal processing
Process I/O SystemsPressure transmitter acquisitionShutdown valve command output
Technical specifications for AI2 2500M/AI2/XXXXX/XXXXXX
-
Product ModelAI2 2500M/AI2/XXXXX/XXXXXX
-
Product ParametersANALOGUE INPUT MODULE
-
In stock1 unit
-
ManufacturerInvensys
-
No of channels2
-
Input typesTC, RTD, Volts, mA, mV, Potentiometer,Pyrometer, Zirconia probe
-
mV range-150mV to +150mV at input impedance >100MΩ
-
mA range-22mA to +22mA with 5Ω burden in theTerminal Unit
-
RTD supportSupport for 2, 3 and 4 wire resistancethermometer devices
-
Ohms range0 to 600Ω 3- or 4-wire lead compensation
-
Hi Ohms range0 to 5kΩ 3- or 4-wire lead compensation
-
Pot range5% to 95% ‘rotation’ of 100Ω to 5kΩ pot
-
I/O PlatformFoxboro 2500
-
Backplane Supply24 V DC
-
Module FormatPlug-in I/O module
-
Field ConnectionRemovable terminal unit
-
Mounting2500 base unit
-
DiagnosticsFront status indicators
-
Configuration2500 engineering tools
View all additional
Alternative Names
AI2 2500M/AI2/XXXXX/XXXXXX
Foxboro ANALOGUE INPUT MODULE
Foxboro 2500 process I/O ANALOGUE INPUT MODULE
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match AI2 2500M/AI2/XXXXX/XXXXXX to the installed Foxboro 2500 process I/O
Foxboro AI2 2500M/AI2/XXXXX/XXXXXX is a ANALOGUE INPUT MODULE for Foxboro 2500 process I/O. Its exact article identity determines the supported field, control or communication function and the approved companion hardware.
Engineering should compare no of channels (2), input types (TC, RTD, Volts, mA, mV, Potentiometer,Pyrometer, Zirconia probe) and mv range (-150mV to +150mV at input impedance >100MΩ) with the installed system design.
Use the applicable manufacturer documentation for wiring and configuration. Validate communication, signal conversion or control response with the connected equipment before returning the process to service.
Features:
- Exact identity: AI2 2500M/AI2/XXXXX/XXXXXX
- Product class: ANALOGUE INPUT MODULE
- Family: Foxboro 2500 process I/O
The Foxboro AI2 2500M/AI2/XXXXX/XXXXXX requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete AI2 2500M/AI2/XXXXX/XXXXXX identity before exchange
Replace AI2 2500M/AI2/XXXXX/XXXXXX only after matching the complete article identity, ANALOGUE INPUT MODULE, installed Foxboro 2500 process I/O role and documented hardware revision. Similar housings or related family numbers do not establish interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Record addresses, parameters and current diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Run the documented functional test and retain the acceptance record.
Features:
- Exact identity: AI2 2500M/AI2/XXXXX/XXXXXX
- Product class: ANALOGUE INPUT MODULE
- Family check: Foxboro 2500 process I/O
The Foxboro AI2 2500M/AI2/XXXXX/XXXXXX requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for AI2 2500M/AI2/XXXXX/XXXXXX
- Foxboro Foxboro 2500 process I/O references reviewed
- Exact Foxboro identity required before service
Documentation for Foxboro AI2 2500M/AI2/XXXXX/XXXXXX must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size15.2 × 2.5 × 8.8 cm
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about AI2 2500M/AI2/XXXXX/XXXXXX
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should the exact AI2 2500M/AI2/XXXXX/XXXXXX be identified for a quotation?
Provide the complete AI2 2500M/AI2/XXXXX/XXXXXX label, quantity, clear nameplate and connector photographs, installed Foxboro 2500 process I/O system and destination country. -
Can another Foxboro part directly replace AI2 2500M/AI2/XXXXX/XXXXXX?
Do not decide from appearance or a partial code. Match the complete identity, ANALOGUE INPUT MODULE, field interface, hardware revision, connections and configured system role. -
What should be recorded before removing AI2 2500M/AI2/XXXXX/XXXXXX?
Photograph each cable, connector, terminal, shield, earth point and adjacent module, then record addresses, parameters and active diagnostics. -
Which arrival checks apply to AI2 2500M/AI2/XXXXX/XXXXXX?
Check the exact label, housing or board condition, connector keying, terminals, supplied accessories and packing before disturbing the installed unit. -
How should AI2 2500M/AI2/XXXXX/XXXXXX be commissioned after installation?
Confirm the documented supply and wiring, restore the controlled configuration, review status diagnostics and test every affected signal or communication path. -
Which system information is needed before ordering AI2 2500M/AI2/XXXXX/XXXXXX?
Confirm the installed Foxboro 2500 process I/O, controller or baseplate, termination hardware, field signal or protocol, hardware revision and current configuration. -
What compatibility checks are required for AI2 2500M/AI2/XXXXX/XXXXXX?
Compare the complete suffix, electrical or signal class, connector arrangement, mounting position, system software and companion hardware. -
What service record should be retained for AI2 2500M/AI2/XXXXX/XXXXXX?
Keep the original connection record, configuration backup, inspection findings, test measurements, diagnostics and final acceptance result.
READY TO VERIFY YOUR PART?
Get a AI2 2500M/AI2/XXXXX/XXXXXX quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
