PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 60R/INP01-02-0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Four channel dynamic input module
Bently Nevada 60R/INP01-02-0 is a dynamic input module. The PAV input module digitizes negative-voltage proximity, acceleration and velocity signals and supplies transducer excitation. Four dynamic inputs provide data for configured Orbit 60 measurements. Sensor polarity, excitation and speed-channel limits must match the installation; this is not a universal analog input.
The exact order 60R/INP01-02-0 selects a PAV dynamic input module with Multi agency option 02 and No SIL option 0. The ordering option is not a substitute for the delivered marking or applicable approval document.
The exact order 60R/INP01-02-0 selects a PAV dynamic input module with Multi agency option 02 and No SIL option 0. The ordering option is not a substitute for the delivered marking or applicable approval document.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for Orbit 60 monitoring system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · SHAFT MONITORING
Digitizing proximity transducer measurements
Compatible proximity systems supply shaft vibration and position signals to configured dynamic inputs. The PAV interface provides sensor excitation and digital data for system processing. -
02 · CASING VIBRATION
Connecting supported velocity and acceleration sensors
The chosen sensor must match the negative-voltage and excitation interface. Buffered outputs give diagnostic access while the system processes configured machinery measurements. -
03 · SPEED REFERENCES
Using limited dynamic-input speed channels
Up to two dynamic inputs can supply speed or Keyphasor signals within the documented limits. Higher input counts or rates require the dedicated KPH module.
Technical specifications for 60R/INP01-02-0
-
Product Model60R/INP01-02-0
-
Product ParametersFour channel dynamic input module
-
In stock2 units
-
ManufacturerBently Nevada
-
Input interface typePAV: negative Prox/Accel/Velom
-
Dynamic input channelsFour
-
Sampling rate102.4 kHz
-
Maximum power consumption11 W
-
Prox/Accel signal range-22 to 0 V
-
Velom signal range-24 to -2 V
-
Prox/Accel input impedance10 kohm typical
-
Prox/Accel transducer supply-24 Vdc, maximum 40 mA
-
Velom excitation3.3 mA constant current
-
Speed-channel limitUp to two per card; 12000 rpm and 200 Hz impulse-rate limits
-
Minimum Keyphasor pulse width10 microseconds
-
Buffered output impedance500 ohm
-
Buffered output connectionFemale Type A ix, public and utility sides
-
Approval ordering option02: Multi, CSA/ATEX/IECEx
-
Functional safety ordering option0: No SIL
View all additional
Alternative Names
60R/INP01 02 0
60R/INP01-02-0 dynamic input module
Bently Nevada 60R/INP01-02-0
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
FOUR CHANNEL DYNAMIC INPUT MODULE
Integrating 60R/INP01-02-0
The PAV input module digitizes negative-voltage proximity, acceleration and velocity signals and supplies transducer excitation. Four dynamic inputs provide data for configured Orbit 60 measurements. Sensor polarity, excitation and speed-channel limits must match the installation; this is not a universal analog input.
Use documented Prox/Accel/Velom sensors with the required negative-voltage interface. For new compatible IEPE installations the manufacturer recommends PVT; existing Velomitor retrofits and 190501 installations should use PAV unless sensor power limits have been verified for another interface.
Match channel type, polarity, excitation and wiring to the sensor. Use the specified ix accessory for buffered outputs. More than two speed channels, speeds above 12000 rpm or impulse rates above 200 Hz require the dedicated KPH input module.
Features:
- Match monitor generation, matched front and rear assemblies, wiring and software
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 60R/INP01-02-0 dynamic input module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 60R/INP01-02-0 requires comparing monitor generation, matched front and rear assemblies, wiring and software. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use documented Prox/Accel/Velom sensors with the required negative-voltage interface. For new compatible IEPE installations the manufacturer recommends PVT; existing Velomitor retrofits and 190501 installations should use PAV unless sensor power limits have been verified for another interface.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 60R/INP01-02-0 dynamic input module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 60R/INP01-02-0 dynamic input module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size22.2x15.7x7cm
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 60R/INP01-02-0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 60R/INP01-02-0 identified?
The exact order 60R/INP01-02-0 selects a PAV dynamic input module with Multi agency option 02 and No SIL option 0. The ordering option is not a substitute for the delivered marking or applicable approval document. -
What is the function of this component?
The PAV input module digitizes negative-voltage proximity, acceleration and velocity signals and supplies transducer excitation. Four dynamic inputs provide data for configured Orbit 60 measurements. Sensor polarity, excitation and speed-channel limits must match the installation; this is not a universal analog input. -
Which installed equipment must be matched?
Use documented Prox/Accel/Velom sensors with the required negative-voltage interface. For new compatible IEPE installations the manufacturer recommends PVT; existing Velomitor retrofits and 190501 installations should use PAV unless sensor power limits have been verified for another interface. -
Where is this component used?
Compatible proximity systems supply shaft vibration and position signals to configured dynamic inputs. The PAV interface provides sensor excitation and digital data for system processing. -
What must be checked during installation?
Match channel type, polarity, excitation and wiring to the sensor. Use the specified ix accessory for buffered outputs. More than two speed channels, speeds above 12000 rpm or impulse rates above 200 Hz require the dedicated KPH input module. -
Does a buffered-output connector use ordinary Ethernet data?
No. The ix connector carries short-circuit-protected analog transducer outputs. Use the documented BTO accessory and signal instructions, not an assumed Ethernet connection. -
Can all four inputs be configured as high-speed Keyphasor channels?
No. PAV allows up to two speed channels with the stated speed and impulse-rate limits. Use the dedicated KPH module when those limits are exceeded.
READY TO VERIFY YOUR PART?
Get a 60R/INP01-02-0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
