PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3636T - Relay Output Module
Triconex 3636T is a non-triplicated Relay Output Module with thirty-two non-commoned, normally open output contacts. Its exact-model point-isolation minimum is 2500 VDC.
Match the connected load to the 155 VAC/VDC voltage ceiling, 2 A current limit and applicable switching-power limits. Reactive and incandescent loads require separate assessment; point indicators are asserted only by the primary module.
Match the connected load to the 155 VAC/VDC voltage ceiling, 2 A current limit and applicable switching-power limits. Reactive and incandescent loads require separate assessment; point indicators are asserted only by the primary module.
BEFORE YOU BUY
Check the complete installed configuration
ACTUAL APPLICATIONS
Where 3636T provides relay-contact switching
The original relay specification separates voltage, current and load-dependent switching limits. Apply every relevant limit to the engineered circuit.
-
01 · ISOLATION REVIEW
Match the exact point-isolation class
Use the documented 2500 VDC minimum for 3636T when reviewing the system interface. Keep this isolation specification separate from the 155 VAC/VDC maximum switched voltage. -
02 · LAMP CIRCUITS
Check incandescent starting demand
Assess lamp inrush rather than nominal running current alone. The guide warns that inrush can reach ten to fifteen times the nominal lamp current and directs users to lamp-manufacturer data. -
03 · SWITCHING DUTY
Evaluate relay contact utilization
Compare the required output cycle rate and operating duty with the documented relay limits. Expected life is specified at maximum rated load and is not an unrestricted service-life guarantee.
Technical specifications for 3636T
-
Product Model3636T
-
Product ParametersRelay Output Module
-
ManufacturerInvensys
-
Output architectureNon-triplicated relay outputs
-
Output points32, non-commoned
-
Contact arrangementNormally open
-
Maximum switched voltage155 VAC/VDC
-
Maximum load current2 A
-
Resistive switching power2000 VA; 150 W maximum
-
Reactive-load derating25% of maximum switching power; 37.5 W for DC
-
Maximum output cycle rateLess than 30 cycles per second
-
Expected life at maximum rated loadMore than 10,000 cycles
-
Field fuse requirementOne 2.5 A fast-acting fuse per output
-
Point isolation minimum2500 VDC
-
Logic power with all points offLess than 10 W
-
Logic power with all points onLess than 20 W
-
Module status indicatorsPass, Fault and Active
-
Point indicator behaviorOnly the primary module asserts point LEDs
View all additional
Alternative Names
3636T
Triconex 3636T
Tricon Relay 3636T
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match relay contacts, protection and switching duty
Triconex 3636T is a non-triplicated Relay Output Module with thirty-two non-commoned, normally open output contacts. Its exact-model point-isolation minimum is 2500 VDC.
Match the connected load to the 155 VAC/VDC voltage ceiling, 2 A current limit and applicable switching-power limits. Reactive and incandescent loads require separate assessment; point indicators are asserted only by the primary module.
Apply voltage, current and power limits together. Review reactive-load derating and lamp inrush; do not use the isolation-test rating as a field operating voltage.
Features:
- 32 non-commoned relay outputs
- Normally open contact arrangement
- 2500 VDC minimum point isolation
The 3636T requires configuration and installation checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Preserve the exact 3636T identity and 2500 VDC point-isolation class. Use the manufacturer active-module checks before removing a faulty I/O module.
Match the connected load to the 155 VAC/VDC voltage ceiling, 2 A current limit and applicable switching-power limits. Reactive and incandescent loads require separate assessment; point indicators are asserted only by the primary module.
Retain the validated safety logic and proof-test records. Recommission affected channels under the approved site procedure.
Features:
- 32 non-commoned relay outputs
- 2500 VDC minimum point isolation
- Load-dependent switching limits
The 3636T requires replacement verification of relay contact wiring, protection and load behavior before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The Manufacturer's Manual download is a manufacturer technical-data extract, not a complete operation manual. The installation guide contains only source-supported checks. Specifications of other configurations shown on source pages must not be applied to this exact order.
Features:
- Sources: Invensys Tricon v9-v10 Planning and Installation Guide, 9720077-012, February 2009
- Use complete equipment instructions for installation and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 3636T is supplied here as a technical-data extract; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.2 × 40.6 × 39.8 cm
-
Shipping weight2.42 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3636T
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What exact isolation distinction separates 3636T from 3636R?
The table gives 2500 VDC minimum for 3636T and 1500 VDC minimum for 3636R. This does not establish unconditional interchangeability. -
Can the relay output cycle at thirty times per second or faster?
The specified maximum cycle rate is less than 30 cycles per second. Use the stated limit when assessing switching duty. -
Does the contact-life figure promise continuous lifetime operation?
No. The guide states more than 10,000 cycles at maximum rated load. Actual duty and load characteristics must be assessed separately. -
Why must lamp starting current be included in the switching calculation?
Incandescent-lamp inrush may be ten to fifteen times nominal load current. The guide requires using inrush in the switching-power calculation. -
Where should the duration and amplitude of lamp inrush be obtained?
The manufacturer directs users to the lamp manufacturer for detailed inrush amplitude and duration, rather than deriving those details from the relay nominal current rating. -
May the VA and watt limits be treated as the same quantity?
No. The relay table separately lists 2000 VA and 150 W maximum for resistive switching. Apply the appropriate power limit along with the voltage and current limits. -
What must be true before withdrawing a faulty I/O module?
The manufacturer requires an Active replacement or hot spare and the faulty module Active indication off. Do not withdraw it merely because another module is physically present. -
Can multiple replacement I/O modules be inserted simultaneously?
No. The general module-replacement rules require one module at a time and waiting for its Active indication before installing the next.
READY TO VERIFY YOUR PART?
Get a 3636T quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
