PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
4200N Nuclear primary extender module for the Tricon safety instrumented system
Triconex 4200N is a Nuclear primary extender module used with the Tricon safety instrumented system. The complete order reference identifies the required hardware and must be matched to the installed chassis, baseplate, cable or field termination.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
4200N — Primary fibre distribution
Use 4200N specifically for primary fibre distribution after confirming its documented companion hardware, circuit assignments and site test plan.
- 01 · FEED UP TO THREE REMOTE SITES
Feed up to three remote sites
Assign the RX1, RX2 and RX3 paths to the documented expansion locations. - 02 · GROUND-LOOP ISOLATION
Ground-loop isolation
Use the optical connection to separate remote cabinet grounds from the main chassis. - 03 · NETWORK PATH DIAGNOSTICS
Network path diagnostics
Inspect PASS, FAULT and transmit indicators for every active fibre route.
Technical specifications for 4200N
-
Product Model4200N
-
Product ParametersNuclear primary extender module
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerInvensys
-
Component TypeNuclear primary extender module
-
Order Reference4200N
-
System PlatformTriconex safety control system
-
Primary FunctionTransmits I/O bus to remote chassis
-
Channel or Port CapacityUp to three remote sites
-
Electrical ClassificationMultimode fibre up to 2 km
-
Compatible Hardware4201N remote RXM sets
-
Mounting ArrangementPrimary Tricon chassis
-
Connection InterfaceSix fibres per remote location
-
Diagnostic CoveragePASS-FAULT-ACTIVE-TX-RX1-RX2-RX3
-
Documented VariantNuclear 1E primary module
-
Operating Environment0 to 60 °C controller service
-
Storage Environment−40 to 75 °C equipment storage
-
Relative Humidity5 to 95% non-condensing
-
Commissioning RequirementVerify every affected safety path
View all additional
Alternative Names
4200N
Triconex 4200N
Invensys 4200N
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match 4200N to the installed Triconex configuration
Triconex 4200N is a Nuclear primary extender module for the Tricon safety instrumented system. Verify the complete product identity and controller generation before integration.
Match all mating modules, baseplates, termination panels, cables, field power and signal assignments. Preserve approved project records.
Complete the manufacturer-recommended diagnostics and site functional test after installation.
Features:
- Exact product identity: 4200N
- Product class: Nuclear primary extender module
- Model-specific values listed in the specifications
The Triconex 4200N requires its ratings, wiring and installed configuration to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the full replacement identity before commissioning
Replace Triconex 4200N only after matching the complete order reference, hardware revision, connector or terminal arrangement and installed function.
Record the existing slot, cable and field-terminal labels before removal. Transfer only configuration data approved for the exact hardware and project.
After installation, verify power, communications, every connected point, alarm response and the complete safety function.
Features:
- Match the complete 4200N identifier
- Compare revision, connectors and mating hardware
- Test diagnostics and field operation before service
The Triconex 4200N requires replacement verification against the installed hardware and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Available documents must be matched to the complete 4200N identity, installed system and applicable revision.Features:
- Model-specific data sheet prepared for 4200N
- Manufacturer guide reference identified before order
- Installation steps follow Triconex maintenance controls
Documentation for Triconex 4200N must match the installed system and revision; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
- 01
Shipping & delivery
- DispatchEligible stock: same / next day
- CarriersDHL, FedEx or UPS
- Ship fromXiamen, China
- Packed size2.2 × 40.5 × 40 cm
- Shipping weight1.88 kg
- 02
Payment & customs
- PaymentBank transfer (T/T)
- CurrenciesUSD · EUR · GBP · RMB
- Credit cardsNot accepted
- HS reference8538900000
- OriginUnited States
- 03
Warranty & returns
- Warranty12 months from AMIKON
- InspectionLabel, condition and packing checks
- ReturnsPrior RMA authorisation required
- CompatibilityConfirm before order
- OEM warrantyDoes not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
Part checked
Full suffix recordedCondition checked
Label and appearancePacking checked
Antistatic protectionTracking supplied
Established couriersSandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 4200N
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which installed record confirms primary function for this primary fibre distribution?
Primary Function is Transmits I/O bus to remote chassis. Compare the approved drawing and complete nameplate. -
How should technicians verify channel or port capacity during primary fibre distribution?
Channel or Port Capacity is Up to three remote sites. Record the measured result in the maintenance file. -
What must be matched before using 4201N remote RXM sets with this primary fibre distribution?
Compatible Hardware is 4201N remote RXM sets. Confirm mating hardware before any connector is engaged. -
Why does connection interface matter to the primary fibre distribution connection?
Connection Interface is Six fibres per remote location. Preserve labels, polarity and physical keying. -
Which diagnostic result is required for primary fibre distribution acceptance?
Diagnostic Coverage is PASS-FAULT-ACTIVE-TX-RX1-RX2-RX3. Resolve every active fault indication before release. -
How is the documented variant distinguished during primary fibre distribution replacement?
Documented Variant is Nuclear 1E primary module. Do not infer interchangeability from appearance alone. -
What environmental limit applies while commissioning the primary fibre distribution?
Operating Environment is 0 to 60 °C controller service. Keep the cabinet within the documented operating limits. -
Which final test releases the primary fibre distribution hardware to service?
Commissioning Requirement is Verify every affected safety path. Test every affected signal path under the site procedure.
READY TO VERIFY YOUR PART?
Get a 4200N quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
