PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Invensys
- Triconex
- 9668-110NJ
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
9668-110NJ Relay termination panel for the Tricon safety instrumented system
Triconex 9668-110NJ is a Relay termination panel used with the Tricon safety instrumented system. The complete order reference identifies the required hardware and must be matched to the installed chassis, baseplate, cable or field termination.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
9668-110NJ — Nuclear relay termination
Use 9668-110NJ specifically for nuclear relay termination after confirming its documented companion hardware, circuit assignments and site test plan.
- 01 · LAND SAFETY-RELATED RELAY CONTACTS
Land safety-related relay contacts
Route 32 normally-open circuits through the XLPEJ interface while retaining channel labels. - 02 · PRESERVE QUALIFIED CABLING
Preserve qualified cabling
Keep the nuclear cable construction, bend radius and connector identity recorded for the cabinet. - 03 · PROVE CONTACT OPERATION
Prove contact operation
Exercise each relay command and confirm continuity at its final termination.
Technical specifications for 9668-110NJ
-
Product Model9668-110NJ
-
Product ParametersRelay termination panel
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerInvensys
-
Component TypeRelay termination panel
-
Order Reference9668-110NJ
-
System PlatformTriconex safety control system
-
Primary FunctionTerminates normally-open relay outputs
-
Channel or Port Capacity32 relay output circuits
-
Electrical ClassificationXLPEJ interface cable construction
-
Compatible Hardware3636TN relay output module
-
Mounting ArrangementDIN-rail field panel
-
Connection Interface3000590-110 ETA interface
-
Diagnostic CoverageContinuity and relay-point proving
-
Documented VariantNuclear 1E cable-panel set
-
Operating Environment0 to 60 °C controller service
-
Storage Environment−40 to 75 °C equipment storage
-
Relative Humidity5 to 95% non-condensing
-
Commissioning RequirementVerify every affected safety path
View all additional
Alternative Names
9668-110NJ
Triconex 9668-110NJ
Invensys 9668-110NJ
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match 9668-110NJ to the installed Triconex configuration
Triconex 9668-110NJ is a Relay termination panel for the Tricon safety instrumented system. Verify the complete product identity and controller generation before integration.
Match all mating modules, baseplates, termination panels, cables, field power and signal assignments. Preserve approved project records.
Complete the manufacturer-recommended diagnostics and site functional test after installation.
Features:
- Exact product identity: 9668-110NJ
- Product class: Relay termination panel
- Model-specific values listed in the specifications
The Triconex 9668-110NJ requires its ratings, wiring and installed configuration to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the full replacement identity before commissioning
Replace Triconex 9668-110NJ only after matching the complete order reference, hardware revision, connector or terminal arrangement and installed function.
Record the existing slot, cable and field-terminal labels before removal. Transfer only configuration data approved for the exact hardware and project.
After installation, verify power, communications, every connected point, alarm response and the complete safety function.
Features:
- Match the complete 9668-110NJ identifier
- Compare revision, connectors and mating hardware
- Test diagnostics and field operation before service
The Triconex 9668-110NJ requires replacement verification against the installed hardware and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Available documents must be matched to the complete 9668-110NJ identity, installed system and applicable revision.Features:
- Model-specific data sheet prepared for 9668-110NJ
- Manufacturer guide reference identified before order
- Installation steps follow Triconex maintenance controls
Documentation for Triconex 9668-110NJ must match the installed system and revision; confirm manual availability in the written quotation.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
- 01
Shipping & delivery
- DispatchEligible stock: same / next day
- CarriersDHL, FedEx or UPS
- Ship fromXiamen, China
- Packed size19.7 × 11 × 5.5 cm
- Shipping weight0.52 kg
- 02
Payment & customs
- PaymentBank transfer (T/T)
- CurrenciesUSD · EUR · GBP · RMB
- Credit cardsNot accepted
- HS reference8538900000
- OriginUnited States
- 03
Warranty & returns
- Warranty12 months from AMIKON
- InspectionLabel, condition and packing checks
- ReturnsPrior RMA authorisation required
- CompatibilityConfirm before order
- OEM warrantyDoes not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
Part checked
Full suffix recordedCondition checked
Label and appearancePacking checked
Antistatic protectionTracking supplied
Established couriersSandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 9668-110NJ
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which installed record confirms primary function for this nuclear relay termination?
Primary Function is Terminates normally-open relay outputs. Compare the approved drawing and complete nameplate. -
How should technicians verify channel or port capacity during nuclear relay termination?
Channel or Port Capacity is 32 relay output circuits. Record the measured result in the maintenance file. -
What must be matched before using 3636TN relay output module with this nuclear relay termination?
Compatible Hardware is 3636TN relay output module. Confirm mating hardware before any connector is engaged. -
Why does connection interface matter to the nuclear relay termination connection?
Connection Interface is 3000590-110 ETA interface. Preserve labels, polarity and physical keying. -
Which diagnostic result is required for nuclear relay termination acceptance?
Diagnostic Coverage is Continuity and relay-point proving. Resolve every active fault indication before release. -
How is the documented variant distinguished during nuclear relay termination replacement?
Documented Variant is Nuclear 1E cable-panel set. Do not infer interchangeability from appearance alone. -
What environmental limit applies while commissioning the nuclear relay termination?
Operating Environment is 0 to 60 °C controller service. Keep the cabinet within the documented operating limits. -
Which final test releases the nuclear relay termination hardware to service?
Commissioning Requirement is Verify every affected safety path. Test every affected signal path under the site procedure.
READY TO VERIFY YOUR PART?
Get a 9668-110NJ quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
