PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
MP 3009 Main processor module for the Tricon safety instrumented system
Triconex MP 3009 is a Main processor module used with the Tricon safety instrumented system. The complete order reference identifies the required hardware and must be matched to the installed chassis, baseplate, cable or field termination.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for MP 3009
Manufacturer documentation places the Main Processor Module in practical safety applications. The three cases below describe different operating tasks in which MP 3009 performs its documented product-family role with the configured companion equipment.
- 01 · POWER GENERATION
Verify fuel-gas isolation with Main Processor
At the control layer of the gas-pressure signals and double-block valves, MP 3009 provides its specified system function as a Main Processor Module. During confirmed fuel-system trip, the system uses this function to close the documented isolation path, helping it stop fuel flow to the protected equipment. - 02 · CHEMICAL & PETROCHEMICAL
Balance furnace interlocking during startup and flame proving
Across the draft, flame and fuel-train devices, MP 3009 handles its designated signal or control duty as a Main Processor Module. During startup and flame proving, the system uses this function to sequence purge, ignition and fuel permissives, helping it avoid admitting fuel under unsafe conditions. - 03 · OIL & GAS
Maintain fire-and-gas response during validated detector voting
Within the detectors, alarms and mitigation outputs, MP 3009 operates in its approved product-family role as a Main Processor Module. During validated detector voting, the system uses this function to initiate the specified alarms and mitigation actions, helping it coordinate the documented emergency response.
Technical specifications for MP 3009
-
Product ModelMP 3009
-
Product ParametersMain processor module
-
In stock1 unit
-
ManufacturerInvensys
-
Module TypeTricon main processor module
-
Processor RoleSafety logic execution engine
-
Controller ArchitectureTriple modular redundant processing
-
Backplane InterfaceTriplicated controller communication bus
-
Program EnvironmentTriStation 1131 engineering suite
-
Operating SupplyChassis-provided logic power
-
Memory FunctionApplication and diagnostic storage
-
Time SynchronizationController system clock service
-
Status IndicatorsPASS-FAULT-ACTIVE front display
-
Diagnostic AccessRJ-12 Diagread service connector
-
Operating ModeRUN-PROGRAM-STOP-REMOTE control
-
Online DiagnosticsContinuous processor self-tests
-
Fault HandlingSingle-channel fault tolerance
-
Installation SlotDedicated main chassis MP position
-
Replacement ControlMatch project and firmware revision
View all additional
Alternative Names
MP3009
Triconex MP 3009
Invensys MP 3009
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match MP 3009 to the installed Triconex configuration
Triconex MP 3009 is a Main processor module for the Tricon safety instrumented system. Verify the complete product identity and controller generation before integration.
Match all mating modules, baseplates, termination panels, cables, field power and signal assignments. Preserve approved project records.
Complete the manufacturer-recommended diagnostics and site functional test after installation.
Features:
- Exact product identity: MP 3009
- Product class: Main processor module
- Model-specific values listed in the specifications
The Triconex MP 3009 requires its ratings, wiring and installed configuration to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the full replacement identity before commissioning
Replace Triconex MP 3009 only after matching the complete order reference, hardware revision, connector or terminal arrangement and installed function.
Record the existing slot, cable and field-terminal labels before removal. Transfer only configuration data approved for the exact hardware and project.
After installation, verify power, communications, every connected point, alarm response and the complete safety function.
Features:
- Match the complete MP 3009 identifier
- Compare revision, connectors and mating hardware
- Test diagnostics and field operation before service
The Triconex MP 3009 requires replacement verification against the installed hardware and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Available documents must be matched to the complete MP 3009 identity, installed system and applicable revision.
Features:
- Model-specific data sheet prepared for MP 3009
- Manufacturer guide reference identified before order
- Installation steps follow Triconex maintenance controls
Documentation for Triconex MP 3009 must match the installed system and revision; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
- 01
Shipping & delivery
- DispatchEligible stock: same / next day
- CarriersDHL, FedEx or UPS
- Ship fromXiamen, China
- Packed size2.6 × 7.5 × 12.8 cm
- Shipping weight1.15 kg
- 02
Payment & customs
- PaymentBank transfer (T/T)
- CurrenciesUSD · EUR · GBP · RMB
- Credit cardsNot accepted
- HS reference8538900000
- OriginUnited States
- 03
Warranty & returns
- Warranty12 months from AMIKON
- InspectionLabel, condition and packing checks
- ReturnsPrior RMA authorisation required
- CompatibilityConfirm before order
- OEM warrantyDoes not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
Part checked
Full suffix recordedCondition checked
Label and appearancePacking checked
Antistatic protectionTracking supplied
Established couriersSandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about MP 3009
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What controller functions are executed by the MP 3009 processor?
For the Tricon main processor module, module type is Tricon main processor module. Confirm this identity against the installed nameplate and cabinet records. -
How does triple modular redundancy handle a single processor-channel fault?
For the Tricon main processor module, controller architecture is Triple modular redundant processing. Use the manufacturer value when checking the existing hardware and field circuit. -
Which TriStation project information must be saved before MP replacement?
For the Tricon main processor module, program environment is TriStation 1131 engineering suite. Record the actual installation before any connector, module or terminal is moved. -
What does the MP Diagread connector provide to service personnel?
For the Tricon main processor module, time synchronization is Controller system clock service. Keep the documented arrangement intact and correct any discrepancy before energising. -
How do RUN, PROGRAM, STOP and REMOTE affect processor maintenance?
For the Tricon main processor module, operating mode is RUN-PROGRAM-STOP-REMOTE control. Review the indicated condition together with active controller diagnostics. -
Which front-panel indications should be recorded before removing MP 3009?
For the Tricon main processor module, fault handling is Single-channel fault tolerance. Do not assume interchangeability from appearance; the complete configuration must agree. -
Why must firmware compatibility be checked with the installed project?
For the Tricon main processor module, installation slot is Dedicated main chassis MP position. Retain the result in the maintenance record for the affected safety function. -
What proof test is needed before the safety application returns to service?
For the Tricon main processor module, replacement control is Match project and firmware revision. Complete the stated commissioning check before returning the equipment to service.
READY TO VERIFY YOUR PART?
Get a MP 3009 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
