PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- PROVIBTECH
- TM0180-A08-B00-C02-D10
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
TM0180-A08-B00-C02-D10 8 mm Proximity Probe
PROVIBTECH TM0180-A08-B00-C02-D10 is listed in the TM0180 proximity-probe family. Manufacturer family literature describes non-contact measurements of shaft vibration and position. The complete order code must be checked against the supplied probe label before selection; family data does not establish interchangeability.
BEFORE YOU BUY
Confirm the complete product identity
ACTUAL APPLICATIONS
Where TM0180-A08-B00-C02-D10 Fits Within Industrial Equipment Sectors
Uses span factory equipment, process machinery and power generation, with suitability dependent on documented configuration and installation conditions.
-
01 · GENERAL MANUFACTURING
Factory Production Equipment and Industrial Motor Driven Machinery
Industrial drive motors supporting continuous factory production and processing.Production fans and blowers serving general manufacturing plant operations. -
02 · PROCESS INDUSTRIES
Process Compression and Fluid Handling in Industrial Production
Compressors providing process gas flow for industrial production equipment.Centrifuges and process pumps supporting separation and fluid handling. -
03 · POWER GENERATION
Power Generation Machinery and Thermal Plant Auxiliary Equipment
Steam turbine generator trains used for industrial power generation.Rotating boiler feed equipment supporting thermal power plant operations.
Technical specifications for TM0180-A08-B00-C02-D10
-
Product ModelTM0180-A08-B00-C02-D10
-
Product Parameters8 mm Proximity Probe
-
In stock1 unit
-
ManufacturerPROVIBTECH
-
Sensing methodEddy-current proximity sensing (TM0180 family)
-
Nominal probe diameter8 mm (TM0180 family)
View all additional
Alternative Names
TM0180 A08 B00 C02 D10
TM0180 proximity probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Check the documented configuration for TM0180-A08-B00-C02-D10
TM0180-A08-B00-C02-D10 belongs to the TM0180 probe family. Select the complete probe, extension cable and driver combination from the applicable manufacturer documentation. Do not retain a previous brand or family assignment as evidence of compatibility.
Confirm the manufacturer, complete part code, hardware markings and existing equipment documentation before any replacement decision. Obtain exact-part guidance where the available manual covers only a family or complete assembly.
Installation and acceptance testing must follow the applicable manufacturer instructions and the equipment owner's approved procedure. This product listing is not a wiring instruction or an authorization to substitute hardware.
Features:
- Exact identity: TM0180-A08-B00-C02-D10
- Product class: 8 mm Proximity Probe
- Family: TM0180
The PROVIBTECH TM0180-A08-B00-C02-D10 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete TM0180-A08-B00-C02-D10 identity before exchange
Confirm the full TM0180-A08-B00-C02-D10 identity before selecting a replacement. Match the manufacturer markings and the configuration required by the installed equipment. No drop-in equivalence is asserted for another family, revision or similarly shaped product.
Use the existing equipment documentation and clear photographs of the original label and connectors for identification. Electrical ratings and pin assignments require exact-part evidence; they must not be copied from an unrelated product.
Agree the replacement scope and acceptance criteria with qualified personnel using the applicable manufacturer instructions. Do not treat this listing as a commissioning procedure or proof of compatibility.
Features:
- Exact identity: TM0180-A08-B00-C02-D10
- Configuration: Confirm against equipment records
- Acceptance: Follow applicable manufacturer instructions
The PROVIBTECH TM0180-A08-B00-C02-D10 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Family documents describe TM0180 equipment. Confirm the applicable revision, complete ordering code and matched components before use; these links do not certify every suffix shown on this page.Features:
- Complete recorded identity: TM0180-A08-B00-C02-D10
- Exact-part document applicability requires confirmation
- Exact product identity required before service
Documentation for PROVIBTECH TM0180-A08-B00-C02-D10 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirmed on quotation
-
Shipping weightConfirmed after packing
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceConfirmed for shipment
-
OriginConfirmed from item documentation
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about TM0180-A08-B00-C02-D10
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which manufacturer family covers TM0180-A08-B00-C02-D10?
ProvibTech TM0180 family literature covers 8 mm proximity probes. Confirm the complete suffix against the supplied item label. -
Does a probe alone define the measurement specification?
No. The family documentation describes a matched measurement chain comprising a probe, extension cable and driver; system ratings must not be treated as standalone probe ratings. -
Can the existing cable and driver be retained automatically?
No. Check the complete probe, extension-cable and driver configuration against the applicable manufacturer instructions before selecting a replacement.
READY TO VERIFY YOUR PART?
Get a TM0180-A08-B00-C02-D10 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
