PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Santak
- 730-80141-00P
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
730-80141-00P AS400 dry-contact communication card
Santak 730-80141-00P is a short-format AS400 dry-contact communication card for compatible Santak Castle UPS systems. It exposes UPS status information through relay contacts. The manufacturer data further identifies the product family as Santak Castle UPS, the accessory type as AS400 dry-contact card, the card format as Short card, the interface type as Relay dry contacts, the status function as UPS state signalling, the control function as Supported remote shutdown, and the host interface as UPS intelligent slot.
The card provides relay dry-contact outputs for external monitoring equipment and includes the supported remote-shutdown signal interface. Its intelligent-slot format is designed for the corresponding Castle UPS accessory platform. The remaining technical data identifies the signal type as Potential-free contacts, the communication mode as Hardwired status interface, the monitoring role as External UPS monitoring, the output technology as Electromechanical relay, the system role as UPS communication accessory, the connected equipment as Monitoring controller, the application class as Power-system supervision, and the part number as 730-80141-00P.
The card provides relay dry-contact outputs for external monitoring equipment and includes the supported remote-shutdown signal interface. Its intelligent-slot format is designed for the corresponding Castle UPS accessory platform. The remaining technical data identifies the signal type as Potential-free contacts, the communication mode as Hardwired status interface, the monitoring role as External UPS monitoring, the output technology as Electromechanical relay, the system role as UPS communication accessory, the connected equipment as Monitoring controller, the application class as Power-system supervision, and the part number as 730-80141-00P.
BEFORE YOU BUY
Confirm the complete AS400 dry-contact communication card
ACTUAL APPLICATIONS
Application fields for 730-80141-00P
730-80141-00P is used across compatible installations in the following broad industrial application fields, subject to verified system design and operating requirements.
-
01 · TELECOMMUNICATIONS
Telecommunications Networks and Data Infrastructure
Carrier network infrastructure servicesIndustrial data and communications facilities -
02 · COMMERCIAL BUILDINGS
Commercial and Institutional Building Operations
Commercial property operationsInstitutional facility services -
03 · TRANSPORT INFRASTRUCTURE
Rail, Airport and Public Transport Infrastructure
Rail and metro infrastructure servicesAirport and public transport operations
Technical specifications for 730-80141-00P
-
Product Model730-80141-00P
-
Product ParametersAS400 dry-contact communication card
-
In stock1 unit
-
ManufacturerSantak
-
Product familySantak Castle UPS
-
Accessory typeAS400 dry-contact card
-
Card formatShort card
-
Interface typeRelay dry contacts
-
Status functionUPS state signalling
-
Control functionSupported remote shutdown
-
Host interfaceUPS intelligent slot
-
Signal typePotential-free contacts
-
Communication modeHardwired status interface
-
Monitoring roleExternal UPS monitoring
-
Output technologyElectromechanical relay
-
System roleUPS communication accessory
-
Connected equipmentMonitoring controller
-
Application classPower-system supervision
-
Part number730-80141-00P
View all additional
Alternative Names
Santak AS400 dry-contact communication card
Santak Castle UPS accessory platform
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 730-80141-00P AS400 dry-contact communication card
Use 730-80141-00P within the documented Santak Castle UPS accessory platform system and keep its AS400 dry-contact communication card function consistent with the connected control, monitoring or mechanical equipment. The host arrangement should identify the complete device and its intended system role.
Coordinate the field connections, signal references, grounding and control logic with the surrounding equipment. Mechanical orientation, process connections and cable routing should follow the manufacturer arrangement applicable to the installed system.
Complete the associated controller or monitoring configuration before returning the function to service. Review device status and system response under controlled conditions, then retain the final connection and configuration records.
Features:
- Exact model: 730-80141-00P
- Compatible system: Santak Castle UPS accessory platform
- Intended role: AS400 dry-contact communication card
730-80141-00P should be integrated within the documented Santak Castle UPS accessory platform system architecture and retained in the approved project records.
INTERCHANGEABILITY
Check 730-80141-00P technical compatibility
Use the complete 730-80141-00P order identity when evaluating interchangeability within the Santak Castle UPS accessory platform system. Similar appearance or a shared family name does not establish compatibility with the installed hardware and engineering project.
Record the installed position, connector orientation, field wiring, address assignment, communication settings and application configuration before removing the existing unit. Preserve cable labels, shielding arrangements and diagnostic records needed to reproduce the documented system state.
After fitting the selected unit, restore the approved configuration and review controller or device diagnostics before enabling the affected function. Confirm the connected signals and controlled response through the established commissioning procedure, then update the maintenance record.
Features:
- Complete identity: 730-80141-00P
- System compatibility: Santak Castle UPS accessory platform
- Configuration and connection records retained
Interchangeability for 730-80141-00P depends on the complete order identity and the documented electrical, signal and platform characteristics.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Match documents to the complete product identity
- Use the applicable manufacturer family instructions
- Additional documents are supplied only when quoted
Documentation for 730-80141-00P must be checked against the installed configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size16.0 × 12.0 × 4.0 cm
-
Net weight0.20 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538909100
-
OriginChina
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 730-80141-00P
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 730-80141-00P?
730-80141-00P is a AS400 dry-contact communication card for the Santak Castle UPS accessory platform. -
Which identity must be used when ordering 730-80141-00P?
Use the complete 730-80141-00P marking and compare it with the installed label and project records. -
Can a similar family item replace 730-80141-00P?
Do not confirm substitution from a family name or similar appearance. Verify the complete code, interfaces, revision and approved configuration. -
What should be recorded before removing 730-80141-00P?
Record the installed position, connections, cable labels, settings and diagnostic state. -
What should be inspected when 730-80141-00P arrives?
Inspect the label, housing, connectors, terminals and packaging for correct identity and condition. -
Which checks follow installation?
Restore the approved configuration and complete controlled power-up, diagnostic and functional tests. -
What information should accompany a quotation?
Provide the complete model, quantity, clear label photographs, destination and required delivery date. -
Which documentation applies?
Use the manufacturer documentation for Santak Castle UPS accessory platform and confirm that its scope covers the installed configuration.
READY TO VERIFY YOUR PART?
Get a 730-80141-00P quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
