PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
TM2AMM3HT Analog mixed I/O module
Schneider Electric TM2AMM3HT is a Analog mixed I/O module in the Modicon TM2. It is used to perform the assigned signal, control or interface function in the installed equipment.
Its documented configuration includes analog inputs of 2 voltage/current channels, analog outputs of 1 voltage/current channel, input level of High-level analog signals, and module family of Modicon TM2 expansion. During operation, the Analog mixed I/O module performs its assigned Analog mixed I/O module function through the documented power, signal and communication interfaces.
Its documented configuration includes analog inputs of 2 voltage/current channels, analog outputs of 1 voltage/current channel, input level of High-level analog signals, and module family of Modicon TM2 expansion. During operation, the Analog mixed I/O module performs its assigned Analog mixed I/O module function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete Analog mixed I/O module
ACTUAL APPLICATIONS
Application context for TM2AMM3HT
Manufacturer documentation places the Analog Mixed I/O Module in practical automation applications. The three cases below describe different operating tasks in which TM2AMM3HT performs its documented product-family role with the configured companion equipment.
- 01 · AUTOMOTIVE
Regulate robotic joining with Analog Mixed process control
During operation of the robots, fixtures and clamp groups, TM2AMM3HT serves its documented function as a Analog Mixed I/O Module. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle. - 02 · GENERAL MANUFACTURING
Synchronize conveyor routing during route change
Within the zone conveyors and merge points, TM2AMM3HT handles its designated signal or control duty as a Analog Mixed I/O Module. During route change, the system uses this function to coordinate destination data with equipment permissives, helping it move the item to the assigned process. - 03 · CHEMICAL & PETROCHEMICAL
Route reactor charging during batch initiation
Inside the feed valves, vessels and agitators, TM2AMM3HT provides its specified system function as a Analog Mixed I/O Module. During batch initiation, the system uses this function to sequence the material path against vessel readiness, helping it begin the reaction from a verified state.
Technical specifications for TM2AMM3HT
-
Product ModelTM2AMM3HT
-
Product ParametersAnalog mixed I/O module
-
In stock1 unit
-
ManufacturerSchneider Electric
-
Analog Inputs2 voltage/current channels
-
Analog Outputs1 voltage/current channel
-
Input LevelHigh-level analog signals
-
Module FamilyModicon TM2 expansion
-
Controller UseModicon M238 logic controller
-
Conversion TypeMixed analog I/O
-
Wiring MethodRemovable screw terminal
-
Mounting MethodDIN rail or panel
-
Channel ConfigurationSoftware parameter selection
-
Status IndicationModule operating status
-
Signal ReferenceCommon analog return
-
Expansion InterfaceTM2 side-bus connector
-
Primary FunctionMeasurement and command output
-
CommissioningRange and scaling validation
-
Product DesignationTM2AMM3HT
View all additional
Alternative Names
TM2AMM3HT
TM2AMM3HT
Schneider Electric TM2AMM3HT
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match TM2AMM3HT to the installed Modicon TM2
Schneider Electric TM2AMM3HT is a Analog mixed I/O module used in the Modicon TM2.
Confirm analog inputs, input level, field terminals and the approved system configuration.
Use qualified personnel and follow the applicable Schneider Electric installation and commissioning instructions.
Features:
- Exact identity: TM2AMM3HT
- Product class: Analog mixed I/O module
- Family: Modicon TM2
The Schneider Electric TM2AMM3HT requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete TM2AMM3HT identity before exchange
Replace TM2AMM3HT only after matching its full product identity, system role and electrical interface.
Photograph terminals, cable routing, slot position and companion hardware before removal from the Modicon TM2 installation.
Follow the applicable Schneider Electric service procedure and complete tm2amm3ht before release.
Features:
- Match exact TM2AMM3HT identity
- Confirm wiring and companion hardware
- Record the controlled functional test
The Schneider Electric TM2AMM3HT requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for TM2AMM3HT
- Schneider Electric system references reviewed
- Exact hardware identity required before service
Documentation for Schneider Electric TM2AMM3HT must match the installed system and revision; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.6 × 7 × 9.5 cm
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900090
-
OriginFrance
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about TM2AMM3HT
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What record proves the analog inputs check for TM2AMM3HT was completed?
For TM2AMM3HT, save the measured commissioning result; the accepted analog inputs is 2 voltage/current channels in the documented Modicon TM2 configuration. -
How does analog outputs 1 voltage/current channel define the correct TM2AMM3HT installation?
For TM2AMM3HT, compare the installed nameplate and order code; the accepted analog outputs is 1 voltage/current channel in the documented Modicon TM2 configuration. -
Which field check confirms High-level analog signals for TM2AMM3HT?
For TM2AMM3HT, measure the live field condition safely; the accepted input level is High-level analog signals in the documented Modicon TM2 configuration. -
Why is the documented controller use critical on TM2AMM3HT?
For TM2AMM3HT, confirm the engineering configuration; the accepted controller use is Modicon M238 logic controller in the documented Modicon TM2 configuration. -
What wiring decision for TM2AMM3HT depends on Removable screw terminal?
For TM2AMM3HT, inspect the exact terminal and cable route; the accepted wiring method is Removable screw terminal in the documented Modicon TM2 configuration. -
How should technicians commission the channel configuration on TM2AMM3HT?
For TM2AMM3HT, run the documented channel test; the accepted channel configuration is Software parameter selection in the documented Modicon TM2 configuration. -
What fault can a mismatch in expansion interface cause on TM2AMM3HT?
For TM2AMM3HT, review diagnostics before energising; the accepted expansion interface is TM2 side-bus connector in the documented Modicon TM2 configuration. -
Which companion hardware must agree with TM2AMM3HT on TM2AMM3HT?
For TM2AMM3HT, match the mating assembly and revision; the accepted product designation is TM2AMM3HT in the documented Modicon TM2 configuration.
READY TO VERIFY YOUR PART?
Get a TM2AMM3HT quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
