Siemens

Sinumerik Distribution Box

SINUMERIK FM NC/810D/840D/840C 
6FX2006-1BC01 accessories; 
distributor box for HHU and HPU 
(2-channel emergency off)

CONTROL UNIT

SINAMICS G120 CONTROL UNIT 
CU250S-2 DPINTEGRIERT PROFIBUS 
SUPPORT OF VECTORCONTROL
EASY POSITIONING EPOS VIAEXTENDED 
FUNCTION LICENSE 4 CONFIGURABLEDI/DO
6 DI (3 F-DI), 5 DI, 3 DO (1 F-DO), 2 AI
2 AOSAFETY INTEGRATED STO, SBC
SS1 FURTHERSAFETY FUNCTIONS VIA EXTENDED 
SAFETYLICENSE ENCODER: D-CLIQ + HTL/TTL/SSI
RESOLVER/HTL VIA TERMINAL PROTECTION 
IP20USB- AND SD/MMC-INTERFACE

Frequency converter resistance-capacitance board

Voltage Rating:400 V AC – 600 V AC
Resistor: 10Ω–200Ω 
Power Dissipation: ≥250W
Current Handling:5–50 A transient pulses
Operating Temperature: -25°C to +60°C 
Humidity Tolerance: ≤90% non-condensing

BLM power module

AC Line Supply: 3-phase 380–480 V AC
DC Output: 520–650 V DC
Rated Current:18–30 A
Output Power: 15–110 kW
Efficiency: ≥97%
Storage temperature: -25°C to +70°C
Humidity: ≤85% non-condensing

Power supply module

SPARE PART-POWER SUPPLY
INDUSTRIAL
100-240VAC/150W
REV. K8
CV4
CV5
IPC627B/C
IPC827B/C
HMI IPC677B/C
HMI IPC577C

POWER CONTACTOR

contactor AC-1, 140 A, 690 V 
40 °C, 3-pole, 480 V AC, 60 Hz
auxiliary contacts: 2 NO + 2 NC
main circuit: ring cable lug connection, 
control and auxiliary circuit: screw terminal
size: S3

COMMUNICATION MODULE

COMMUNICATION MODULE
CBC
FOR CAN-BUS COMMS
SPARE PART
SIMOVERT MASTERDRIVES
Isolation: up to 500 V
Supply Voltage: Pulls 24 V DC
Process Data (PZD): 4–6 PZD 
Temperature: 0°C – +55°C

TDB MODULE PC BOARD

TDB MODULE PC BOARD
690VAC
FOR CONVERTER MODULE
3-phase AC Voltage: 690 V AC(±10%)
Frequency Tolerance: ±5%
Isolation Voltage: 2000 V AC
Operating Temperature:-25°C to +55°C

DRIVE BOARD

Logic Power Supply: 24 V DC
Analog Inputs:0–10 V, 4–20 mA
Switching Frequency:2–16 kHz
Temperature: -10°C to +50°C
Humidity: ≤85% (non-condensing)

TSE module

Input Channels: 1–4 sensor
Supply Voltage: 24 V DC (±10%)
Current Consumption: ≤100 mA
Ambient Temperature: Operational range 0–55°C

TECHNOLOGICAL BOARD

SIMOVERT MASTERDRIVES 
TECHNOLOGICAL BOARD 
T100 INCL. 
OPERATING INSTRUCTIONS FOR HW
BUT WITHOUT SOFTWARE MODULE

POWER INTERFACE CONTROL BOARD

control electronics Standard incl. 
terminals C98043-A7100-L1
Primary Supply (Logic): 24 V DC ±10% 
Current Handling (Logic): ≤5 A 
Analog signal inputs:±10 V, 4–20 mA
Operating: 0°C to +40°C (full rating).
Extended: Optional derating up to +60°C
Humidity: ≤85% (non-condensing)

DRIVE-CLIQ HUB MODULE

SINAMICS DRIVE-CLIQ 
HUB MODULE 
CABINET DMC20 
WITHOUT DRIVE-CLIQ CABLE

Power supply module

SIMOVERT Master drives 
Power supply module 
PSU1 For devices with 
Designs E through H 3 AC 
380-460, 660-690V, 50/60 Hz 
and 510-620V DC
890-930 V DC

Inverter IGD trigger board

Input Voltage: 24 V DC
Voltage Range: +15 V to -10 V
Current Capacity: 5–10 A
Switching Frequency: Up to 20 kHz
Galvanic Isolation Voltage: ≥2500 V AC
Operating Temperature: -20°C to +55°C
Storage Temperature: -40°C to +85°C

Inverter drive board

Control Voltage: 24 V DC
Signal Voltage: 5 V/3.3 V
Switching Frequency:12–16 kHz
Current Ratings:55–160 kW
Overload Capacity: Typically 150%
Temperature: –10°C to +40°C
Humidity: ≤90% (non-condensing)

Inverter drive board IGD trigger board

Trigger Voltage/Current:+15 V/-10 V
Switching Frequency: Up to 20 kHz
Isolation Voltage: ≥2000 V AC
Logic Supply: +24 V DC (±10%)
Gate Driver Supply: ±15 V DC
Operating Temperature: 0–55°C

DRIVE BOARD

Power Supply (Control Section): 24 V DC (±20%)
DC Link Voltage Handling:500–800 V DC
Motor Compatibility: up to 100s of kW
Switching Frequency:  2–16 kHz
Digital Inputs/Outputs:≥6 DI/DO
Analog Inputs:≥2 × ±10 V, 4–20 mA
Operating Temperature: 0–45°C

POWER ENTRY CONTROL MODULE

Voltage Range: 3-phase AC input
Frequency: 50/60 Hz (±5%)
DC Link voltage:510–720 V DC
Continuous Current (DC Link): Up to 60–80 A
Auxiliary Voltage Supply: 24 V DC 
Aambient Temperature: 0–40°C

G120L Inverter Motherboard

Supply Voltage: 24 V DC (±20%)
Power Consumption: ≤15 W
Motor Compatibility: up to 55 kW
Standard Communication:PROFIBUS DP
Operating Temperature: -20°C to +60°C.
Relative Humidity: ≤95% (non-condensing)

Inverter Power Board

Voltage Range:380–480 V AC
Frequency: 50/60 Hz ±5%
Rated Current:20–200 A
Continuous Power: 10–150 kW
Operating Temperature: -10°C to +50°C (storage up to +70°C)

Frequency Converter Drive Board

PROFIBUS/MPI or PROFINET
Control Voltage: 24 V DC (±15%)
Output Switching Frequency: 1–16 kHz 
Isolation Voltage: ≥2.5 kV AC
Operational Temperature: 0°C to +50°C

Inverter control board

Control Voltage: +24 V DC
Switching Frequency: 5 kHz–15 kHz
Output Pulses: ≥8 PWM
Digital: Start/stop, fault reset
Analog: ±10 V 
Operating Temperature: –10°C to +50°C

Inverter control board

Inverter control board 
IGD9 for devices 510-620 V DC
1300 A
Logic Supply Voltage: +24 V DC (±10%)
DIP Switches:0–10 V, 4–20 mA
Operating Temperature: 0°C to +40°C 
Humidity: ≤95% (non-condensing)

INVERTER DRIVE TRIGGER BOARD

Control Voltage: 24 V DC (±10%)
Isolation Voltage: ≤2.5 kV AC 
Output Frequency: ≤20 kHz
Max Output Current: 3–5 A
Signal Logic: 0–24 V DC control signals
Operating Temperature: –10°C to +55°C
Storage Temperature: –40°C to +85°C
Relative Humidity: ≤93% (non-condensing)