PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200pro
- 6ES7144-4JF00-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7144-4JF00-0AB0 Four Channel RTD Input
Siemens 6ES7144-4JF00-0AB0 is a four channel rtd input in the SIMATIC ET 200pro 4AI RTD HF range. It measures four RTD or resistance signals for distributed temperature monitoring.
The module evaluates four resistance thermometer or resistance signals with selectable characteristic linearization, smoothing and wire-break diagnostics. Supported RTDs include Pt100 through Pt1000 and Ni100 through Ni1000. Two-, three- and four-wire sensor connections are supported; the separate IO connection module must match the station.
The module evaluates four resistance thermometer or resistance signals with selectable characteristic linearization, smoothing and wire-break diagnostics. Supported RTDs include Pt100 through Pt1000 and Ni100 through Ni1000. Two-, three- and four-wire sensor connections are supported; the separate IO connection module must match the station.
BEFORE YOU BUY
Confirm the complete four channel rtd input
ACTUAL APPLICATIONS
Application context for 6ES7144-4JF00-0AB0
6ES7144-4JF00-0AB0 is a four channel rtd input for SIMATIC ET 200pro 4AI RTD HF. Its application scope includes food and beverage, chemical processing, water and wastewater. Match the installed module and electrical configuration.
-
01 · FOOD & BEVERAGE
Food Processing and Beverage Production Industries
Food Processing and PackagingBeverage Production and Bottling -
02 · CHEMICAL PROCESSING
Chemical Manufacturing and Industrial Material Processing
Industrial Chemical ManufacturingSpecialty Chemical Processing -
03 · WATER & WASTEWATER
Water Supply and Wastewater Treatment Processes
Drinking Water TreatmentIndustrial Wastewater Treatment
Technical specifications for 6ES7144-4JF00-0AB0
-
Product Model6ES7144-4JF00-0AB0
-
Product ParametersFour Channel RTD Input
-
In stock9 units
-
ManufacturerSiemens
-
Analog input count4
-
Rated supply24 V DC
-
Typical 1L+ current27 mA
-
Backplane current10 mA at 3.3 V DC, typical
-
Power dissipation0.7 W typical
-
Input address allocation8 byte
-
RTD measuring currents1.25 or 0.5 mA by range
-
All-channel measurement cycle83 ms at 50 Hz, 69 ms at 60 Hz
-
Resistance measuring ranges150 / 300 / 600 / 3000 Ω
-
Shielded sensor cable30 m maximum
-
Measuring resolution15 bits plus sign for RTDs
-
Linearity error±0.05% of input range
-
Temperature coefficient±0.002%/K
-
Repeatability at 25 ℃±0.015% of input range
-
Isolation test voltage707 V DC
View all additional
Alternative Names
6ES7144-4JF00-0AB0
SIMATIC ET 200pro 4AI RTD HF
Four Channel RTD Input industrial assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7144-4JF00-0AB0 four channel rtd input
Match 6ES7144-4JF00-0AB0 to the accepted SIMATIC ET 200pro 4AI RTD HF configuration and associated parts before integration.
The module evaluates four resistance thermometer or resistance signals with selectable characteristic linearization, smoothing and wire-break diagnostics. Supported RTDs include Pt100 through Pt1000 and Ni100 through Ni1000. Two-, three- and four-wire sensor connections are supported; the separate IO connection module must match the station.
Follow the applicable manufacturer instructions for 6ES7144-4JF00-0AB0. Compare connection assignments, retain the accepted wiring record and test the affected signals before returning the equipment to service.
Features:
- Analog input count: 4
- Rated supply: 24 V DC
- Typical 1L+ current: 27 mA
The 6ES7144-4JF00-0AB0 four channel rtd input requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7144-4JF00-0AB0 four channel rtd input
Confirm the complete 6ES7144-4JF00-0AB0 identity and SIMATIC ET 200pro 4AI RTD HF execution before replacement. Match the documented connection and electrical ratings.
Record the existing four channel rtd input connections, companion modules and configuration. Isolate the affected circuits according to the site procedure before removing the installed part.
After fitting 6ES7144-4JF00-0AB0, restore the accepted arrangement and test the affected signals. Retain the component identity and final functional test results with the equipment record.
Features:
- Analog input count: 4
- Rated supply: 24 V DC
- Typical 1L+ current: 27 mA
The 6ES7144-4JF00-0AB0 four channel rtd input requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7144-4JF00-0AB0 four channel rtd input must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4.5 × 13 × 3.5cm
-
Shipping weight0.15kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7144-4JF00-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many RTD channels does the pro high-feature module evaluate?
6ES7144-4JF00-0AB0: analog input count is 4. Apply the documented limits of this execution. -
What nominal supply feeds 4JF00?
6ES7144-4JF00-0AB0: rated supply is 24 V DC. Apply the documented limits of this execution. -
What typical current is drawn from 1L+?
6ES7144-4JF00-0AB0: typical 1l+ current is 27 mA. Apply the documented limits of this execution. -
Which backplane current applies to this RTD module?
6ES7144-4JF00-0AB0: backplane current is 10 mA at 3.3 V DC, typical. Apply the documented limits of this execution. -
What typical dissipation is listed for 4AI RTD HF?
6ES7144-4JF00-0AB0: power dissipation is 0.7 W typical. Apply the documented limits of this execution. -
How much input address space is occupied?
6ES7144-4JF00-0AB0: input address allocation is 8 byte. Apply the documented limits of this execution. -
Which SIMATIC ET 200pro 4AI RTD HF configuration identifies this spare for quotation?
Provide 6ES7144-4JF00-0AB0, quantity and the installed SIMATIC ET 200pro 4AI RTD HF configuration. Include a photograph showing the connected assembly and its electrical connections. -
What identifies the delivered four channel rtd input?
Compare the complete 6ES7144-4JF00-0AB0 label with the ordered SIMATIC ET 200pro 4AI RTD HF execution. Inspect the connectors and enclosure and verify the listed accessories before replacement.
READY TO VERIFY YOUR PART?
Get a 6ES7144-4JF00-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
