PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330103-00-16-05-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
160 mm case with standard ClickLoc connection
Bently Nevada 330103-00-16-05-02-05 is a metric, non-armored proximity probe for the 3300 XL 8 mm transducer system. Its configuration combines an M10 x 1 thread, a 160 mm case and a 0.5-metre lead fitted with a standard-cable ClickLoc connector.
Connector option 02 does not include the protector supplied with option 01, and it does not select FluidLoc cable. Verify connector protection for the installed environment, then match the complete cable length, Proximitor Sensor and target geometry to the documented measurement requirements.
Connector option 02 does not include the protector supplied with option 01, and it does not select FluidLoc cable. Verify connector protection for the installed environment, then match the complete cable length, Proximitor Sensor and target geometry to the documented measurement requirements.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330103-00-16-05-02-05
These contexts are supported by the applicable manufacturer series documentation. They do not establish installation of this exact order in a named customer project.
-
01 · SHAFT VIBRATION
Non-contact vibration measurements on fluid-film bearings
The 160 mm probe case can be used where its mounting geometry fits the documented shaft-vibration measurement point. The 0.5 m lead connects through the matched extension and Proximitor arrangement; the complete system determines performance. -
02 · AXIAL POSITION
Static shaft-position measurement at a suitable target
This M10 x 1 probe configuration supports the family position-measurement function when the conductive target and initial gap satisfy the official requirements. Case length establishes mechanical reach, not a larger measuring range. -
03 · PHASE REFERENCE
Keyphasor and shaft-speed measurement channels
The 3300 XL 8 mm family supports phase-reference and speed measurements. Verify the target geometry, monitor configuration and complete electrical length for this standard-cable probe before applying it to the documented channel.
Technical specifications for 330103-00-16-05-02-05
-
Product Model330103-00-16-05-02-05
-
Product ParametersMetric non-armored proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting threadM10 x 1
-
Unthreaded length0 mm
-
Overall case length160 mm
-
Probe total length0.5 m
-
Cable armorWithout armor
-
Connector and cable optionClickLoc; no included connector protector; standard cable
-
Probe tip diameter8 mm nominal
-
Tip materialPolyphenylene sulfide (PPS)
-
Case materialAISI 303 or 304 stainless steel
-
Operating/storage temperature-52 to +177 degrees C, standard probe
-
Minimum cable bend radius25.4 mm
-
Maximum connector torque0.565 N m
-
Maximum thread engagement15 mm
-
Approval option05: CSA, ATEX, IECEx; verify the supplied label and applicable certificate
View all additional
Alternative Names
330103-00-16-05-02-05 shaft proximity probe
3300 XL 8 mm M10 x 1 standard-cable probe
160 mm case non-armored proximity sensor 0.5 m
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8MM PROXIMITY TRANSDUCER
Integrate the complete proximity probe configuration
330103-00-16-05-02-05 is a non-armored 3300 XL 8 mm probe with M10 x 1 mounting, a 160 mm overall case and a 0.5 m lead. It forms a measurement system with the appropriate extension cable and Proximitor Sensor.
Select the complete electrical length and verify target material, gap and nearby conductive surfaces before commissioning. The nominal 8 mm tip and case dimensions must not be mistaken for system measuring range.
The ordered connector is clickloc; no included connector protector with standard cable. Do not assign FluidLoc properties to the standard cable.
Features:
- Match probe, extension and Proximitor Sensor
- M10 x 1 mounting configuration
- Verify standard-cable connector protection
The Bently Nevada 330103-00-16-05-02-05 proximity probe requires the associated hardware, mounting and measurement configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Preserve the complete 330103-00-16-05-02-05 configuration, including M10 x 1 thread, 160 mm case, 0 mm unthreaded length, 0.5 m lead, connector and approval option. A matching family prefix is not enough.
Verify the probe, extension and Proximitor Sensor as a complete system. The manufacturer allows certain mixed-component arrangements but states that systems incorporating non-XL components remain limited by their applicable non-XL performance specifications.
No reviewed official source establishes an exact-order hardware revision, discontinuation date or approved successor. Confirm current manufacturer replacement guidance and do not treat a datasheet revision as the hardware revision of the supplied probe.
Features:
- Compare every ordering-code group
- Check mechanical fit and electrical system length
- Verify the actual approval marking
The Bently Nevada 330103-00-16-05-02-05 proximity probe requires replacement verification against the complete installed configuration and applicable manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Existing product PDF references retained; document review remains required
- Match manufacturer document scope to the complete order and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330103-00-16-05-02-05 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330103-00-16-05-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is a connector protector included with option 02?
The option 02 description specifies ClickLoc with standard cable and does not include the protector listed for option 01. The manufacturer recommends connector protection for installations. -
Is this a FluidLoc version of 330103?
No. Connector option 02 uses standard cable. FluidLoc is identified by separate ordering options and must not be inferred from the 330103 family name. -
What mounting thread and case length must be checked?
This metric configuration uses M10 x 1, zero unthreaded length and a 160 mm overall case. Check the bracket thread, case clearance and permitted engagement independently. -
Can its 0.5 m lead be connected to any Proximitor Sensor?
No. The probe and extension cable must match the documented system length and the appropriate 3300 XL configuration. Similar-looking connectors do not establish compatibility. -
How tightly should the cable connector be installed?
For matching XL connectors, follow the finger-tight instruction and the 0.565 N m maximum connector torque. Probe case torque and mixed-connector procedures are separate requirements. -
Does a longer case increase the linear measurement range?
No additional range is established by the case-length code. The complete documented transducer system determines measurement performance; case length addresses installation geometry. -
Can older non-XL components be mixed without affecting performance?
No. The official guidance states that mixed systems are limited to the applicable non-XL specifications. Do not advertise full XL performance solely because this probe is an XL component. -
What final evidence should maintenance record for 330103-00-16-05-02-05?
Record the complete probe suffix, M10 x 1 mounting, 160 mm case length, 0.5 m lead, ClickLoc connection, matched system length, initial gap and verified channel response.
READY TO VERIFY YOUR PART?
Get a 330103-00-16-05-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
