PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-400
- 6ES7492-1CL00-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7492-1CL00-0AA0 SIMATIC S7-400 48-pole front connector
Siemens 6ES7492-1CL00-0AA0 is a SIMATIC S7-400 48-pole front connector designed for SIMATIC S7-400 automation equipment. It provides the documented interfaces, electrical characteristics and installation format associated with this exact order number.
Use the applicable Siemens data for wiring, configuration and replacement. Match the complete suffix, terminal arrangement and operating limits, then perform controlled functional checks before returning the connected process or machine to service.
Use the applicable Siemens data for wiring, configuration and replacement. Match the complete suffix, terminal arrangement and operating limits, then perform controlled functional checks before returning the connected process or machine to service.
BEFORE YOU BUY
Confirm the complete simatic s7-400 48-pole front connector
ACTUAL APPLICATIONS
Application context for 6ES7492-1CL00-0AA0
6ES7492-1CL00-0AA0 supports industry applications that use the documented simatic s7-400 48-pole front connector within SIMATIC S7-400. Its connector type is 48-pole front connector, and its contact technology is Crimp contacts. These characteristics are used in industrial automation, utility process control and facility automation where the installed system and complete order code have been confirmed.
-
01 · POWER GENERATION
Electric Power Generation, Transmission and Distribution
Thermal, hydroelectric and renewable electricity generation facility infrastructureRegional electrical transmission and distribution infrastructure facility networks -
02 · OIL & GAS
Oil, Natural Gas and Petroleum Refining
Offshore and onshore oil and gas industry fieldsPetroleum refining, storage and regional distribution facility infrastructure -
03 · CHEMICALS
Chemical, Polymer and Specialty Materials Industries
Bulk chemical manufacturing and specialty materials industry facilitiesPolymer, fertilizer and industrial gas sector facility infrastructure
Technical specifications for 6ES7492-1CL00-0AA0
-
Product Model6ES7492-1CL00-0AA0
-
Product ParametersSIMATIC S7-400 48-pole front connector
-
In stock1 unit
-
ManufacturerSiemens
-
Product FamilySIMATIC S7-400
-
Component TypeFront connector
-
Module ApplicationS7-400 signal modules
-
Termination MethodCrimp contacts
-
Pole Count48 poles
View all additional
Alternative Names
6ES7492-1CL00-0AA0
SIMATIC S7-400 SIMATIC S7-400 48-pole front connector
S7-400 48-pole front connector connector type
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7492-1CL00-0AA0 simatic s7-400 48-pole front connector
6ES7492-1CL00-0AA0 is a SIMATIC S7-400 48-pole front connector in the SIMATIC S7-400 family. Confirm the complete order code, installed position and documented connector type of 48-pole front connector before wiring or mechanical installation.
Integrate the unit according to its documented contact technology of Crimp contacts. Match terminal allocation, supply, addressing and adjacent hardware to the accepted system drawing, and preserve the configured signal or drive relationships.
Commission 6ES7492-1CL00-0AA0 by checking the specified compatible system of SIMATIC S7-400, status indications and diagnostics. Test every affected channel, communication path or controlled load, then record the final configuration and results.
Features:
- Connector type: 48-pole front connector
- Contact technology: Crimp contacts
- Compatible system: SIMATIC S7-400
The 6ES7492-1CL00-0AA0 simatic s7-400 48-pole front connector requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7492-1CL00-0AA0 simatic s7-400 48-pole front connector
Select a replacement using the full 6ES7492-1CL00-0AA0 order code and the SIMATIC S7-400 equipment definition. Verify the documented connector type of 48-pole front connector; a related family number does not establish interchangeability.
Before removal, photograph the label, terminals, connector orientation and adjacent module arrangement. Compare the contact technology of Crimp contacts, retain the installed project settings and identify any separately ordered terminal or mounting accessories.
After fitting the verified replacement, restore the approved configuration and validate the compatible system of SIMATIC S7-400. Check power-up diagnostics and all affected functions before returning the equipment to service.
Features:
- Application: Signal module front connection
- Contact quantity: 48 positions
- Connector format: Plug-in front connector
The 6ES7492-1CL00-0AA0 simatic s7-400 48-pole front connector requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7492-1CL00-0AA0 simatic s7-400 48-pole front connector must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size7.3 × 29.5 × 3 cm
-
Shipping weight0.16 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7492-1CL00-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What S7-400 hardware is 6ES7492-1CL00-0AA0 intended to connect?
Siemens identifies 6ES7492-1CL00-0AA0 as a 48-pole front connector for S7-400 signal modules. Check the target module's front-connector requirement and pin assignment before preparing the cable loom. -
Why does the crimp-contact detail matter for 6ES7492-1CL00-0AA0?
The 6ES7492-1CL00-0AA0 is designed for crimp contacts. Use the contact specification and crimp tooling required for the installed S7-400 module; screw-terminal wiring assumptions do not apply. -
How can a wired 6ES7492-1CL00-0AA0 be transferred to a replacement?
Before disconnecting 6ES7492-1CL00-0AA0, photograph its 48-pole position numbering and label every conductor. Reproduce the original pin map and continuity-check the loom before energizing the signal module. -
Is any 48-pole S7-400 connector interchangeable with 6ES7492-1CL00-0AA0?
Do not decide from pole count alone. Compare the complete 6ES7492-1CL00-0AA0 order code, crimp termination and mating signal-module designation with the installed assembly. -
What test follows installation of a new 6ES7492-1CL00-0AA0?
After attaching 6ES7492-1CL00-0AA0, verify seating, strain relief and continuity for the wired points. Then test each affected S7-400 signal under the approved maintenance procedure. -
What explains intermittent signals at the 6ES7492-1CL00-0AA0 connection?
Inspect the 6ES7492-1CL00-0AA0 seating and each crimp termination for poor engagement or damaged contacts. Also check the mating module; intermittent points do not by themselves prove a connector defect. -
What should a buyer specify for 6ES7492-1CL00-0AA0 and its contacts?
Request 6ES7492-1CL00-0AA0 by its full order code and state the required quantity of compatible crimp contacts and any wiring accessories. Confirm included parts in the quotation rather than assuming they ship together. -
How should a distributor inspect 6ES7492-1CL00-0AA0 before shipment?
Verify the 6ES7492-1CL00-0AA0 label, 48-pole housing and contact cavities. Note whether contacts are included in the actual offered package, and document the condition for the buyer.
READY TO VERIFY YOUR PART?
Get a 6ES7492-1CL00-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
