PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200pro
- 6ES7145-4GF00-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7145-4GF00-0AB0 Four Channel Current Output Module
Siemens 6ES7145-4GF00-0AB0 is an AO 4 I High Feature analog output module for SIMATIC ET 200pro. It provides four current-output channels for compatible distributed automation stations.
The module supports ±20 mA, 0–20 mA and 4–20 mA signals, with range-dependent resolution and an eight-byte output allocation. The four-channel cycle is 3 ms, and output loading is limited to 600 Ω and 1 mH. The bus module is included in the documented article, while the connection module is ordered separately and must match the station arrangement.
The module supports ±20 mA, 0–20 mA and 4–20 mA signals, with range-dependent resolution and an eight-byte output allocation. The four-channel cycle is 3 ms, and output loading is limited to 600 Ω and 1 mH. The bus module is included in the documented article, while the connection module is ordered separately and must match the station arrangement.
BEFORE YOU BUY
Confirm the complete four channel current output module
ACTUAL APPLICATIONS
Application context for 6ES7145-4GF00-0AB0
6ES7145-4GF00-0AB0 supports analog process control in manufacturing, food processing and water treatment. Suitability depends on the ET 200pro station and connected current loads. Select the current range, connection module and output addressing to match the accepted project.
-
01 · INDUSTRIAL MANUFACTURING
Manufacturing Production and Process Control
Industrial Manufacturing Process ControlAssembly Production and Automation -
02 · FOOD & BEVERAGE
Food Manufacturing and Beverage Processing
Food Processing and PackagingBeverage Manufacturing and Production -
03 · WATER & WASTEWATER
Water Treatment and Processing Production
Water Supply Process ManagementWastewater Treatment and Processing
Technical specifications for 6ES7145-4GF00-0AB0
-
Product Model6ES7145-4GF00-0AB0
-
Product ParametersFour Channel Current Output Module
-
In stock7 units
-
ManufacturerSiemens
-
Analog output channels4 current outputs
-
Supported current ranges±20 mA; 0–20 mA; 4–20 mA
-
Nominal load voltage24 V DC
-
Load-supply input current110 mA maximum
-
Backplane current consumption10 mA maximum at 3.3 V DC
-
Typical power loss2.3 W
-
Maximum output load600 Ω; 1 mH inductance
-
Maximum open-circuit output voltage16 V
-
Resolution allocation15 bits incl. sign for ±20/4–20 mA; 14 bits for 0–20 mA
-
Cycle time for all channels3 ms
-
Conversion time per channel0.7 ms
-
Current settling time0.1 ms resistive; 1 ms inductive
-
Maximum shielded output cable30 m
-
Output address requirement8 bytes
-
Measurement error limits±0.15% basic; ±0.2% over operating range
View all additional
Alternative Names
6ES7145-4GF00-0AB0
ET 200pro AO 4 I High Feature
Four-channel ET 200pro analog current output
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7145-4GF00-0AB0 four channel current output module
Configure the AO 4 I High Feature module in the compatible ET 200pro station. Select the required current range and reserve eight output bytes for the four channels.
Check the 24 V load supply, shielded cable length and connected impedance against the 600 Ω and 1 mH limits. Use the separately selected connection module with the included bus module.
Follow the module and station instructions for wiring and commissioning. Verify each scaled output, load response and station diagnostic status before acceptance.
Features:
- Analog output channels: 4 current outputs
- Supported current ranges: ±20 mA; 0–20 mA; 4–20 mA
- Nominal load voltage: 24 V DC
The 6ES7145-4GF00-0AB0 four channel current output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7145-4GF00-0AB0 four channel current output module
Match 6ES7145-4GF00-0AB0 and its AO 4 I High Feature execution. Confirm the installed connection module and current-range requirements before exchange.
Back up output scaling, addressing and station configuration. Record channel assignments and connected load impedance before isolating the affected circuits.
Restore the documented parameters and verify all four current outputs at safe test values. Check load response and station diagnostics before returning to process control.
Features:
- Analog output channels: 4 current outputs
- Supported current ranges: ±20 mA; 0–20 mA; 4–20 mA
- Nominal load voltage: 24 V DC
The 6ES7145-4GF00-0AB0 four channel current output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7145-4GF00-0AB0 four channel current output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4.5 × 13 × 3.5cm
-
Shipping weight0.15kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7145-4GF00-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which current-output ranges are available?
The module supports ±20 mA, 0–20 mA and 4–20 mA. Choose the documented range in the station project. -
How much output address space is required?
Four current-output channels require eight output bytes. -
What loading limits apply to the current outputs?
The documented maximum load is 600 Ω with an inductive component of 1 mH. Check both impedance and settling requirements. -
Is resolution identical for all output ranges?
No. The stated maximum is 15 bits including sign for ±20 mA and 4–20 mA, and 14 bits for 0–20 mA. -
What is the cycle time for the four output channels?
The datasheet lists a 3 ms cycle for all channels and 0.7 ms conversion time per channel. -
Is the connection module included with this article?
The bus module is included, but the connection module is ordered separately. Match it to the accepted station configuration. -
What details are needed for an analog-output spare quotation?
Provide the complete article, current ranges, connection-module designation and channel load requirements, with the requested quantity. -
How should the delivered AO 4 I module be checked?
Confirm the full article and High Feature current-output designation, inspect the connectors and compare all included parts with the written quotation.
READY TO VERIFY YOUR PART?
Get a 6ES7145-4GF00-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
