PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- SIMATIC RF
- 6GT2002-0LE40
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GT2002-0LE40 RFID Reader Communication Module
Siemens 6GT2002-0LE40 is the SIMATIC RF128C RFID communication module for connecting up to four supported readers to an industrial Ethernet network. It provides the reader-to-controller communication interface for identification and material-flow tracking in production and intralogistics.
The module combines an RJ45 Ethernet connection with four eight-pin, A-coded M12 reader interfaces using RS422. It supports PROFINET IO, EtherNet/IP and XML communication over TCP/IP, with a 100 Mbit/s Ethernet connection. A 24 V DC supply powers the module and the documented reader arrangement; the IP20 enclosure requires a protected location within its 0–55 ℃ operating range.
The module combines an RJ45 Ethernet connection with four eight-pin, A-coded M12 reader interfaces using RS422. It supports PROFINET IO, EtherNet/IP and XML communication over TCP/IP, with a 100 Mbit/s Ethernet connection. A 24 V DC supply powers the module and the documented reader arrangement; the IP20 enclosure requires a protected location within its 0–55 ℃ operating range.
BEFORE YOU BUY
Confirm the complete rfid reader communication module
ACTUAL APPLICATIONS
Application context for 6GT2002-0LE40
6GT2002-0LE40 links compatible RFID readers to industrial Ethernet for automotive production, manufacturing and intralogistics. Reader selection, protocol configuration and protected mounting determine suitability. Its four reader connections provide the identification interface within the configured system.
-
01 · AUTOMOTIVE
Automotive Manufacturing and Vehicle Component Production
Vehicle Body ManufacturingAutomotive Component Assembly -
02 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Material Processing
Metalworking and Tool ProductionManufacturing Material Flow Tracking -
03 · LOGISTICS
Warehouse Logistics and Internal Material Distribution
Warehouse Material Flow ManagementInternal Logistics and Distribution
Technical specifications for 6GT2002-0LE40
-
Product Model6GT2002-0LE40
-
Product ParametersRFID Reader Communication Module
-
In stock2 units
-
ManufacturerSiemens
-
Reader connection capacity4 readers
-
Ethernet communication protocolsPROFINET IO; EtherNet/IP; XML over TCP/IP
-
Ethernet transmission speed100 Mbit/s; full duplex
-
Ethernet connectorRJ45; 8-pin
-
Reader serial interfaceRS422; 19.2–921.6 kbaud
-
Reader connectorM12; 8-pin; A-coded
-
Nominal DC supply24 V DC
-
Permitted supply range20.4–28.8 V DC
-
Typical unloaded supply current0.13 A at 24 V DC
-
Maximum reader interface current0.8 A
-
Maximum RS422 cable length700 m at 115.2 kbaud; less than 100 m at 921.6 kbaud
-
Operating ambient temperature0–55 ℃
-
Storage and transport temperature−40–70 ℃
-
Maximum operating humidity95%
-
Ingress protectionIP20
View all additional
Alternative Names
6GT2002-0LE40
SIMATIC RF128C RFID communication module
Four-reader industrial Ethernet RFID gateway
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6GT2002-0LE40 rfid reader communication module
Use 6GT2002-0LE40 as the RF128C communication interface for supported RFID readers. Match the intended PROFINET IO, EtherNet/IP or XML communication method to the controller configuration and the documented reader combination.
Check the 20.4–28.8 V DC supply and the reader current budget before connection. Reader links use eight-pin, A-coded M12 connectors and RS422; permitted cable length depends on the selected reader and serial transmission speed.
Follow the RF128C operating instructions for addressing, reader assignment and communication setup. Validate the configured identification transactions, status LEDs and controller diagnostics before accepting the identification system.
Features:
- Reader connection capacity: 4 readers
- Ethernet communication protocols: PROFINET IO; EtherNet/IP; XML over TCP/IP
- Ethernet transmission speed: 100 Mbit/s; full duplex
The 6GT2002-0LE40 rfid reader communication module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6GT2002-0LE40 rfid reader communication module
Match the complete 6GT2002-0LE40 designation and the RF128C reader allocation before exchanging the communication module. Connector appearance alone does not establish equivalence with another SIMATIC RF communication module.
Record the Ethernet protocol, device name or IP address, reader port assignments and relevant configuration. Check the RJ45 and A-coded M12 connections, supply polarity and the configured RS422 transmission rate against the documented installation.
Restore the accepted network and reader configuration after replacement. Verify all used reader channels, identification results and diagnostic indications under the intended material-flow conditions, then retain the acceptance record.
Features:
- Reader connection capacity: 4 readers
- Ethernet communication protocols: PROFINET IO; EtherNet/IP; XML over TCP/IP
- Ethernet transmission speed: 100 Mbit/s; full duplex
The 6GT2002-0LE40 rfid reader communication module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6GT2002-0LE40 rfid reader communication module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3 × 12.5 × 8cm
-
Shipping weight0.16kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8517623990
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GT2002-0LE40
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many RFID readers can the RF128C connect?
6GT2002-0LE40 provides four reader connections. Use supported readers and include their combined load in the documented DC supply budget. -
Which controller communication protocols are available on this reader gateway?
RF128C supports PROFINET IO, EtherNet/IP and XML communication over TCP/IP. Select and configure the protocol required by the installed controller. -
Are its M12 reader connectors interchangeable with Ethernet connectors?
No. The reader connections are eight-pin, A-coded M12 interfaces using RS422; the Ethernet interface is an eight-pin RJ45 connection. -
Does the 700 m reader cable limit apply at maximum speed?
No. The manual specifies up to 700 m at 115.2 kbaud and less than 100 m at 921.6 kbaud, subject to the connected reader and cable requirements. -
Can the IP20 RF128C operate unprotected on an exposed conveyor?
The RF128C enclosure is IP20 and requires a protected mounting location. The documented operating temperature is 0–55 ℃ with relative humidity up to 95%. -
What network settings should be retained before an RF128C exchange?
Record the selected Ethernet protocol, device name or IP address, reader assignments and configuration. After replacement, validate identification transactions on every used port. -
Which reader details help specify a four-port RFID gateway order?
Provide the 6GT2002-0LE40 designation, reader models, number of used ports, selected Ethernet protocol, cable lengths and required quantity. -
What should receiving inspection cover for the RF128C interfaces?
Check the 6GT2002-0LE40 label, RJ45 interface, four A-coded M12 reader connections, DC supply terminals and enclosure condition against the agreed supply scope.
READY TO VERIFY YOUR PART?
Get a 6GT2002-0LE40 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
