PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
FCL2001-A1 FDnet C-NET Line Card
Siemens FCL2001-A1 is the FDnet/C-NET line card for a compatible modular fire control panel. It is identified by Siemens article A5Q00009875 and expands the integrated detector-line arrangement through the panel card cage. Siemens lists it among the optional module-bus cards for the Sinteso FC2060.
The card supports an arrangement of four loops or eight stub lines. The FC2060 product document specifies a maximum of 252 addresses per FCL2001-A1 line card, so the number of loops must not be multiplied into a larger card address allowance. The actual detector layout and panel configuration must remain within the applicable line-card and panel limits.
The card supports an arrangement of four loops or eight stub lines. The FC2060 product document specifies a maximum of 252 addresses per FCL2001-A1 line card, so the number of loops must not be multiplied into a larger card address allowance. The actual detector layout and panel configuration must remain within the applicable line-card and panel limits.
BEFORE YOU BUY
Confirm the complete FCL2001-A1 identity
ACTUAL APPLICATIONS
Application fields for FCL2001-A1
These broad application fields reflect the documented function and technical characteristics of FCL2001-A1.
-
01 · POWER GENERATION
Conventional Power and Renewable Energy
Conventional power and renewable electricity generationElectricity generation and industrial energy integration -
02 · METALS
Mining and Industrial Metallurgical Energy
Mining and industrial metallurgical energy integrationMetal recycling and municipal water treatment -
03 · PULP & PAPER
Pulp, Paper and Renewable Electricity
Pulp and paper and renewable electricityPaper and industrial environmental water treatment
Technical specifications for FCL2001-A1
-
Product ModelFCL2001-A1
-
Product ParametersFDnet C-NET Line Card
-
In stock1 unit
-
ManufacturerSiemens
-
Supported detector-line busesFDnet / C-NET
-
Maximum loop configuration4 loops
-
Alternative stub configuration8 stubs
-
Maximum addresses per card252
-
Documented host panelFC2060 modular fire control panel
View all additional
Alternative Names
FCL2001-A1
Sinteso Modular Fire Control
FDnet C-NET Line Card
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate FCL2001-A1 within Sinteso Modular Fire Control
Confirm that the modular fire panel and its configured card cage support the FCL2001-A1 FDnet/C-NET card. The Siemens FC2060 document explicitly lists this option. Use the panel engineering tools and applicable planning instructions to assign the card position and detector-line layout before making changes to the live installation.
Plan the field connections as the supported loop or stub arrangement and keep the total address allocation within the 252-address card limit. The four-loop arrangement does not provide four independent 252-address capacities. Match the connected FDnet or C-NET devices and line characteristics to the panel documentation.
Commission the added card and detector lines using the panel-specific procedure and review the resulting device assignment and fault indications. Maintain the required fire-alarm service controls while work is in progress. Confirm the intended alarm and fault behavior at the panel before restoring the installation to normal service.
Features:
- Supported detector-line buses: FDnet / C-NET
- Maximum loop configuration: 4 loops
- Sinteso Modular Fire Control
Use FCL2001-A1 only within the documented Sinteso Modular Fire Control arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace FCL2001-A1 within Sinteso Modular Fire Control
Save the panel configuration and record the FCL2001-A1 card position, article reference and connected detector lines before exchange. Retain the loop or stub topology and address list. Other module-bus line cards in the same cage support different detector families and must not be selected solely by their similar form factor.
Follow the fire-panel maintenance and isolation procedure before handling the card or its field connections. Label the connected lines and inspect the card-cage contacts and terminal arrangement. Compare the replacement with the FCL2001-A1 identification and the applicable panel documentation before restoring the connections.
Restore the validated panel configuration and verify recognition of the card and connected devices. Test the required alarm, fault and line-disconnection responses through the approved service procedure. Confirm the final device and address assignment before returning the panel to the normal monitored state.
Features:
- FCL2001-A1 complete order code
- Documented host panel: FC2060 modular fire control panel
- Retain the documented Sinteso Modular Fire Control connection arrangement
Use FCL2001-A1 only within the documented Sinteso Modular Fire Control arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for FCL2001-A1
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for FCL2001-A1 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size1.30 x 12.50 x 26.40 cm
-
Net weight0.12 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8531901000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about FCL2001-A1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which buses are supported by FCL2001-A1?
FCL2001-A1 is the Siemens line card for FDnet and C-NET detector lines. -
How many loops can FCL2001-A1 provide?
FCL2001-A1 supports a four-loop arrangement. -
Can FCL2001-A1 use stub lines?
Yes. Siemens describes FCL2001-A1 with an alternative eight-stub arrangement. -
What is the card address limit of FCL2001-A1?
The FC2060 product document lists a maximum 252 addresses per FCL2001-A1 card. -
Does four loops mean 1008 addresses on FCL2001-A1?
No. The documented maximum for FCL2001-A1 remains 252 addresses per card. -
Which Siemens article reference identifies FCL2001-A1?
Siemens identifies FCL2001-A1 with article A5Q00009875. -
Should the A5Q00009875 reference accompany an FCL2001-A1 order?
Quote FCL2001-A1 and A5Q00009875 together and state whether connection hardware is included. -
Which panel details help assess an FCL2001-A1 replacement?
Provide the FCL2001-A1 card position, panel model, configured topology and device-address list to check the intended line arrangement.
READY TO VERIFY YOUR PART?
Get a FCL2001-A1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
FCL2001-A1FDnet C-NET Line CardManufacturer: SiemensView Details
-
4000098-516Termination interface cableManufacturer: InvensysView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
