PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens LOGO!
- 6ED1055-1HB00-0BA2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ED1055-1HB00-0BA2 LOGO DM8 24R expansion module
The Siemens 6ED1055-1HB00-0BA2 is a LOGO DM8 24R digital expansion module that adds four binary inputs and four relay outputs to a compatible LOGO 8 controller. Operation from a 24 volt AC or DC supply makes the module useful for compact control panels that combine low-voltage sensing with isolated switching contacts.
The relay channels can operate contactors, valves, lamps and other discrete loads within their documented ratings, while front indicators give a direct view of channel state during commissioning and service. Connection through the LOGO expansion bus lets the controller address the additional points as part of the same small automation program.
The relay channels can operate contactors, valves, lamps and other discrete loads within their documented ratings, while front indicators give a direct view of channel state during commissioning and service. Connection through the LOGO expansion bus lets the controller address the additional points as part of the same small automation program.
BEFORE YOU BUY
Confirm the complete LOGO DM8 24R expansion module
ACTUAL APPLICATIONS
Application fields for 6ED1055-1HB00-0BA2
6ED1055-1HB00-0BA2 is used across compatible installations in the following broad industrial application fields, subject to verified system design and operating requirements.
-
01 · COMMERCIAL BUILDINGS
Commercial and Institutional Building Operations
Commercial property operationsInstitutional facility services -
02 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Continuous Production
Discrete manufacturing and assembly productionContinuous industrial production operations -
03 · WATER & WASTEWATER
Municipal Water and Industrial Wastewater Services
Municipal water treatment servicesIndustrial wastewater treatment operations
Technical specifications for 6ED1055-1HB00-0BA2
-
Product Model6ED1055-1HB00-0BA2
-
Product ParametersLOGO DM8 24R expansion module
-
In stock1 unit
-
ManufacturerSiemens
-
System familyLOGO 8
-
Module designationDM8 24R
-
Module typeDigital expansion module
-
Supply voltage24 V AC or DC
-
Digital inputs4
-
Input type24 V AC/DC
-
Digital outputs4 relay outputs
-
Relay contact rating5 A resistive load
-
Inductive contact rating3 A
-
Input voltage range20.4 to 28.8 V
-
IsolationRelay outputs electrically isolated
-
Expansion connectionLOGO expansion bus
-
Status indicationChannel status LEDs
-
Mounting methodDIN rail
-
Protection classIP20
View all additional
Alternative Names
Siemens LOGO DM8 24R expansion module
LOGO 8
LOGO DM8 24R expansion module for LOGO 8
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ED1055-1HB00-0BA2 LOGO DM8 24R expansion module
Install 6ED1055-1HB00-0BA2 as the documented LOGO DM8 24R expansion module within the LOGO 8 architecture. The manufacturer data defines its station role, compatible hardware and electrical interface, so the surrounding carrier, backplane, supply and field connections must correspond to that documented arrangement.
Plan the integration around Digital expansion module, 24 V AC or DC, 4. Keep signal commons, cable routing, shielding and protective-earth practice consistent with the applicable system manual, and assign the module or accessory to the correct hardware position in the controller or drive project.
Commission the assembly in a controlled operating state. Confirm supply conditions first, then inspect hardware diagnostics and communications before exercising the connected channels or functions through their intended working range. Retain the final project, wiring and test records with the equipment documentation.
Features:
- Exact identity: 6ED1055-1HB00-0BA2
- Documented LOGO 8 integration
- Controlled commissioning and recorded results
6ED1055-1HB00-0BA2 requires documented system integration before energising the installation.
INTERCHANGEABILITY
Verify 6ED1055-1HB00-0BA2 before replacement
Treat 6ED1055-1HB00-0BA2 as the exact replacement identity for this LOGO 8 function. A similar enclosure or related family code does not confirm equivalent channel behavior, firmware, terminal assignment, licensing or mechanical compatibility.
Before removal, record the installed position and the documented characteristics that affect this unit, including DM8 24R, Digital expansion module, 24 V AC or DC. Capture connector orientation, cable labels, configuration values, network settings and the diagnostic state needed to restore the original installation.
After fitting the replacement, restore the approved configuration and compare all status indications with the saved baseline. Prove the affected inputs, outputs, communications or power paths individually, and complete any manufacturer-required functional or safety validation before returning the machine or process to normal service.
Features:
- Match 6ED1055-1HB00-0BA2 exactly
- Preserve hardware, wiring and configuration records
- Validate every affected function after installation
6ED1055-1HB00-0BA2 requires replacement verification against the installed hardware and configuration.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Match documents to the complete product identity
- Use the applicable manufacturer family instructions
- Additional documents are supplied only when quoted
Documentation for 6ED1055-1HB00-0BA2 must be checked against the installed configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size7.2 × 9.0 × 5.8 cm
-
Net weight0.19 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538909100
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ED1055-1HB00-0BA2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 6ED1055-1HB00-0BA2?
6ED1055-1HB00-0BA2 is a LOGO DM8 24R expansion module for the LOGO 8. -
Which identity must be used when ordering 6ED1055-1HB00-0BA2?
Use the complete 6ED1055-1HB00-0BA2 marking and compare it with the installed label and project records. -
Can a similar family item replace 6ED1055-1HB00-0BA2?
Do not confirm substitution from a family name or similar appearance. Verify the complete code, interfaces, revision and approved configuration. -
What should be recorded before removing 6ED1055-1HB00-0BA2?
Record the installed position, connections, cable labels, settings and diagnostic state. -
What should be inspected when 6ED1055-1HB00-0BA2 arrives?
Inspect the label, housing, connectors, terminals and packaging for correct identity and condition. -
Which checks follow installation?
Restore the approved configuration and complete controlled power-up, diagnostic and functional tests. -
What information should accompany a quotation?
Provide the complete model, quantity, clear label photographs, destination and required delivery date. -
Which documentation applies?
Use the manufacturer documentation for LOGO 8 and confirm that its scope covers the installed configuration.
READY TO VERIFY YOUR PART?
Get a 6ED1055-1HB00-0BA2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ED1055-1HB00-0BA2LOGO DM8 24R expansion moduleManufacturer: SiemensView Details
-
1KHW001179R2011 NSD570Teleprotection terminalManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
