PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SCALANCE
- 6GK5124-0BA00-2AC2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GK5124-0BA00-2AC2 unmanaged Industrial Ethernet switch
Siemens 6GK5124-0BA00-2AC2 is an unmanaged Industrial Ethernet switch in the SCALANCE XC-100 unmanaged switches. It is used to exchange control and diagnostic data between the connected automation devices.
Its documented configuration includes product designation of SCALANCE XC124, rj45 ports of 24 electrical ports, ethernet rate of 10/100 Mbit/s, and switching mode of Unmanaged Ethernet. During operation, the unmanaged Industrial Ethernet switch transfers data across the documented communication interfaces and reports the available link or diagnostic states.
Its documented configuration includes product designation of SCALANCE XC124, rj45 ports of 24 electrical ports, ethernet rate of 10/100 Mbit/s, and switching mode of Unmanaged Ethernet. During operation, the unmanaged Industrial Ethernet switch transfers data across the documented communication interfaces and reports the available link or diagnostic states.
BEFORE YOU BUY
Confirm the complete unmanaged Industrial Ethernet switch
ACTUAL APPLICATIONS
Where 6GK5124-0BA00-2AC2 Fits Across Industrial Application Areas
Applications span food processing, water utilities and automotive production, subject to compatible equipment, interfaces and the installed configuration.
-
01 · WATER & WASTEWATER
Municipal Water Treatment and Sewage Collection Facilities
Municipal sewage treatment plants and remote wastewater pumping stations.Raw water intake facilities and drinking water treatment plants. -
02 · AUTOMOTIVE MANUFACTURING
Vehicle Component Manufacturing and Electronic Assembly Facilities
Automotive electronics production cells for vehicle component manufacturing facilities.Production lines for vehicle sensors, actuators and electronic components. -
03 · FOOD & BEVERAGE
Beverage Bottling and Food Production Plant Equipment
Blending vessels and bottling equipment serving beverage production plants.Food preparation lines and packaging equipment in processing plants.
Technical specifications for 6GK5124-0BA00-2AC2
-
Product Model6GK5124-0BA00-2AC2
-
Product ParametersUnmanaged Industrial Ethernet switch
-
In stock1 unit
-
ManufacturerSiemens
-
Product DesignationSCALANCE XC124
-
RJ45 Ports24 electrical ports
-
Ethernet Rate10/100 Mbit/s
-
Switching ModeUnmanaged Ethernet
-
Redundant SupplyDual supply inputs supported
-
Rated Supply24 V DC
-
DiagnosticsLED status indication
-
Signaling ContactError contact with set button
-
MountingDIN rail, S7 rail or wall
-
Protection DegreeIP20
-
Operating Temperature-40 to +70 deg C
-
Cable InterfaceIndustrial Ethernet RJ45
-
Port NegotiationAutomatic speed negotiation
-
Auto CrossoverAuto MDI-X supported
-
Product StatusActive product
View all additional
Alternative Names
6GK5124 0BA00 2AC2
Siemens unmanaged Industrial Ethernet switch
SCALANCE XC-100 unmanaged switches unmanaged Industrial Ethernet switch
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6GK5124-0BA00-2AC2 to the installed SCALANCE XC-100 unmanaged switches
Siemens 6GK5124-0BA00-2AC2 is a unmanaged Industrial Ethernet switch for the SCALANCE XC-100 unmanaged switches. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare switching mode (Unmanaged Ethernet), redundant supply (Dual supply inputs supported) and rated supply (24 V DC) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6GK5124-0BA00-2AC2
- Product class: unmanaged Industrial Ethernet switch
- Family: SCALANCE XC-100 unmanaged switches
The Siemens 6GK5124-0BA00-2AC2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6GK5124-0BA00-2AC2 identity before exchange
Replace 6GK5124-0BA00-2AC2 only after matching the complete article code, unmanaged Industrial Ethernet switch, installed SCALANCE XC-100 unmanaged switches role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6GK5124-0BA00-2AC2
- Product class: unmanaged Industrial Ethernet switch
- Family check: SCALANCE XC-100 unmanaged switches
The Siemens 6GK5124-0BA00-2AC2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 6GK5124-0BA00-2AC2
- Product family: SCALANCE XC-100 unmanaged switches
- Exact Siemens identity required before service
Documentation for Siemens 6GK5124-0BA00-2AC2 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size6.0 × 12.4 × 12.5 cm
-
Shipping weight1.03 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85176200
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GK5124-0BA00-2AC2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which nameplate details identify the correct 6GK5124-0BA00-2AC2 for a distributor quotation?
Quote 6GK5124-0BA00-2AC2 with the complete suffix, unmanaged Industrial Ethernet switch, SCALANCE XC-100 unmanaged switches, quantity and clear nameplate photographs. -
What should engineering compare before integrating 6GK5124-0BA00-2AC2 into the installed system?
Compare the documented SCALANCE XC-100 unmanaged switches role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to 6GK5124-0BA00-2AC2?
Inspect the 6GK5124-0BA00-2AC2 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same SCALANCE XC-100 unmanaged switches family directly replace 6GK5124-0BA00-2AC2?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 6GK5124-0BA00-2AC2?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 6GK5124-0BA00-2AC2. -
Which configuration data should be backed up before exchanging 6GK5124-0BA00-2AC2?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 6GK5124-0BA00-2AC2 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected unmanaged Industrial Ethernet switch function at a safe operating point. -
What service evidence should be retained after work on 6GK5124-0BA00-2AC2?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 6GK5124-0BA00-2AC2.
READY TO VERIFY YOUR PART?
Get a 6GK5124-0BA00-2AC2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
