PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SCALANCE
- 6GK7443-1GX30-0XE0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GK7443-1GX30-0XE0 Industrial Ethernet communication processor
Communications processor CP 443-1 Advanced 1x 10/100/1000 Mbps, 4x 10/100 Mbps (IE switch) RJ45 ports; ISO; TCP; UDP; PROFINET IO controller; S7 communication; Open communication (send/receive) S7 routing; IP configuration via DHCP/block; IP access control list; time-of-day synchronization; extended web diagnostics; Fast Startup; PROFIenergy support; IP routing; FTP; Web server; email; please note SIOS ID: 109799025 Confirm the complete article identity, installed configuration and manufacturer documentation before ordering or replacement.
BEFORE YOU BUY
Confirm the complete Industrial Ethernet communication processor
ACTUAL APPLICATIONS
Application context for 6GK7443-1GX30-0XE0
Manufacturer documentation places the Industrial Ethernet Communication Processor in practical network applications. The three cases below describe different operating tasks in which 6GK7443-1GX30-0XE0 performs its documented product-family role with the configured companion equipment.
-
01 · INFORMATION TECHNOLOGY
Protect remote-station communication during station reconnection
For the coordinated operation of the distributed I/O and supervisory servers, 6GK7443-1GX30-0XE0 handles its designated signal or control duty as a Industrial Ethernet Communication Processor. During station reconnection, the system uses this function to restore cyclic data exchange with the remote station, helping it return the station to the controller scan. -
02 · AUTOMOTIVE
Protect body-shop ring communication during network-path failover
As part of the managed switches, cell controllers and line servers, 6GK7443-1GX30-0XE0 performs its assigned control role as a Industrial Ethernet Communication Processor. During network-path failover, the system uses this function to preserve line communications over the alternate path, helping it keep body movement coordinated through the event. -
03 · FOOD & BEVERAGE
Regulate filling-line communication with Industrial Ethernet
Within the fillers, checkweighers and line controllers, 6GK7443-1GX30-0XE0 provides its specified system function as a Industrial Ethernet Communication Processor. During line-speed change, the system uses this function to carry cyclic control and diagnostic traffic between line devices, helping it keep filling and inspection events synchronized.
Technical specifications for 6GK7443-1GX30-0XE0
-
Product Model6GK7443-1GX30-0XE0
-
Product ParametersIndustrial Ethernet communication processor
-
In stock1 unit
-
ManufacturerSiemens
-
at the 1st interface10 ... 1000 Mbit/s
-
at the 2nd interface10 ... 100 Mbit/s
-
number of active connections / with multi-protocol mode128
-
protocol / is supported / Media Redundancy Protocol (MRP)Yes
-
number of interfaces / according to Industrial Ethernet5
-
at the 1st interface / according to Industrial Ethernet1
-
at the 2nd interface / according to Industrial Ethernet4
-
interfaces at the 1st interface / according to IndustrialRJ45 port
-
supply voltage / 1 / from backplane bus5 V
-
at 5 V5 %
View all additional
Alternative Names
6GK7443 1GX30 0XE0
SIMATIC NET industrial communication Industrial Ethernet communication processor
Siemens Industrial Ethernet communication processor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6GK7443-1GX30-0XE0 to the installed SIMATIC NET industrial communication
Siemens 6GK7443-1GX30-0XE0 is a Industrial Ethernet communication processor used in the SIMATIC NET industrial communication. Use 6GK7443-1GX30-0XE0 to carry configured plant Ethernet traffic while preserving VLANs, device names, management addresses and documented port assignments.
Match RJ45, SFP or media-module interfaces documented for 6GK7443-1GX30-0XE0; maintain approved link speed, redundancy protocol and optical transceiver selection. Confirm number of interfaces / according to industrial ethernet (5), at the 1st interface / according to industrial ethernet (1), the exact mechanical position and approved system configuration before connection.
After installing 6GK7443-1GX30-0XE0, confirm link state, ring or standby behavior, PROFINET diagnostics and permitted management access before restoring control traffic. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6GK7443-1GX30-0XE0
- Product class: Industrial Ethernet communication processor
- Family: SIMATIC NET industrial communication
The Siemens 6GK7443-1GX30-0XE0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6GK7443-1GX30-0XE0 identity before exchange
Replace 6GK7443-1GX30-0XE0 only after matching the full article identity, Industrial Ethernet communication processor, number of active connections / with multi-protocol mode (128) and documented system role. Confirm that the installed hardware version and controlled configuration agree with the manufacturer record.
Before removal, photograph the product label, mounting position, interfaces at the 1st interface / according to industrial (RJ45 port), cable routing, shields, earth connections and adjacent assemblies. Preserve the approved program, parameter set or network configuration needed for recovery.
After installation, verify supply voltage / 1 / from backplane bus (5 V) and at 5 v (5 %). Review diagnostics, test the affected function at a safe operating point and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6GK7443-1GX30-0XE0
- interfaces at the 1st interface / according to Industrial : RJ45 port
- at 5 V: 5 %
The Siemens 6GK7443-1GX30-0XE0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6GK7443-1GX30-0XE0
- Installation checks matched to SIMATIC NET industrial communication
- Exact Siemens identity required before service
Documentation for Siemens 6GK7443-1GX30-0XE0 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.5 × 12.9 × 14.2 cm
-
Shipping weight0.867 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85176200
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GK7443-1GX30-0XE0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which at the 1st interface value must match when sourcing 6GK7443-1GX30-0XE0?
6GK7443-1GX30-0XE0 is documented with at the 1st interface 10 ... 1000 Mbit/s. Compare this value, the full order number and installed system record before purchase. -
How should engineering verify at the 2nd interface for 6GK7443-1GX30-0XE0?
Use the manufacturer data and installed configuration to confirm at the 2nd interface 10 ... 100 Mbit/s; retain the checked value in the replacement work pack. -
What does number of active connections / with multi-protocol mode 128 mean for installing 6GK7443-1GX30-0XE0?
The installation must satisfy number of active connections / with multi-protocol mode 128 together with the documented power, interface, mounting and environmental limits for 6GK7443-1GX30-0XE0. -
Which compatibility records should accompany a distributor quote for 6GK7443-1GX30-0XE0?
Provide the complete model, quantity, nameplate photos, installed SIMATIC NET industrial communication, required interfaces and destination country. Include project or network records when relevant. -
Can 6GK7443-1GX30-0XE0 replace a similar Industrial Ethernet communication processor without configuration changes?
Do not decide by appearance. Match the full order number, hardware or firmware level, protocol / is supported / Media Redundancy Protocol (MRP) Yes, interfaces and approved project before exchange. -
What should receiving inspection check on 6GK7443-1GX30-0XE0 before installation?
Check the exact label, housing, connectors, terminals, mounting points and supplied accessories. Reject damage, contamination, bent pins or unreadable identification. -
Which connection evidence should maintenance capture before removing 6GK7443-1GX30-0XE0?
Photograph connector keying, cable destinations, port assignments, shields, protective earth and adjacent modules. Save the controlled configuration and current diagnostics. -
What commissioning result confirms 6GK7443-1GX30-0XE0 is ready for service?
Confirm normal diagnostics, communication and affected equipment response, then test the documented Industrial Ethernet communication processor function under controlled conditions and record acceptance.
READY TO VERIFY YOUR PART?
Get a 6GK7443-1GX30-0XE0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
