PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMODRIVE
- 6SN1118-0DJ23-0AA2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SN1118-0DJ23-0AA2 Digital control loop module
Siemens 6SN1118-0DJ23-0AA2 is a Digital control loop module used in the SIMODRIVE 611. It controls one high-performance servo axis and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, SIMODRIVE 611 system class, Single-axis channel, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, SIMODRIVE 611 system class, Single-axis channel, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Digital control loop module
ACTUAL APPLICATIONS
Application context for 6SN1118-0DJ23-0AA2
Manufacturer documentation places the Digital Control Loop Module in practical drive applications. The three cases below describe different operating tasks in which 6SN1118-0DJ23-0AA2 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Route intake-pump staging with Digital Control
In the automation chain for the intake pumps, wet-well levels and common headers, 6SN1118-0DJ23-0AA2 handles its designated signal or control duty as a Digital Control Loop Module. During wet-well rise, the system uses this function to bring the next pump into the required speed range, helping it control level without a sudden hydraulic step. -
02 · MINING & METALS
Regulate rolling-mill coordination with Digital Control
During operation of the mill stands and cooling sections, 6SN1118-0DJ23-0AA2 handles its designated signal or control duty as a Digital Control Loop Module. During load transition, the system uses this function to coordinate material handoff with the active production pass, helping it hold the rolling sequence inside its process window. -
03 · AUTOMOTIVE
Monitor robotic joining with Digital Control process control
In the automation chain for the robots, fixtures and clamp groups, 6SN1118-0DJ23-0AA2 serves its documented function as a Digital Control Loop Module. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle.
Technical specifications for 6SN1118-0DJ23-0AA2
-
Product Model6SN1118-0DJ23-0AA2
-
Product ParametersDigital control loop module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassDigital control loop module
-
Drive FamilySIMODRIVE 611
-
Primary FunctionControls one high-performance servo axis
-
Power ArchitectureDigital NC axis control
-
Voltage ClassSIMODRIVE 611 system class
-
Current RatingSingle-axis channel
-
Power SectionServo control section
-
Mechanical DesignHigh-performance plug-in module
-
Electrical Interface1 Vpp sin/cos measuring interface
-
Commissioning CheckTest encoder, loop response and axis limits
View all additional
Alternative Names
6SN1118 0DJ23 0AA2
SIMODRIVE 611 Digital control loop module
Siemens one-axis 1 Vpp module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SN1118-0DJ23-0AA2 to the installed SIMODRIVE 611
Siemens 6SN1118-0DJ23-0AA2 is a Digital control loop module used in the SIMODRIVE 611 to control one high-performance servo axis. Its digital nc axis control role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm SIMODRIVE 611 system class, Single-axis channel, the servo control section, high-performance plug-in module and 1 vpp sin/cos measuring interface. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete test encoder, loop response and axis limits, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SN1118-0DJ23-0AA2
- Function: Controls one high-performance servo axis
- Family: SIMODRIVE 611
The Siemens 6SN1118-0DJ23-0AA2 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SN1118-0DJ23-0AA2 identity before exchange
Treat 6SN1118-0DJ23-0AA2 as a configuration-specific Digital control loop module for the SIMODRIVE 611. Match the complete Siemens article number, installed servo control section, board or module revision, mechanical design and approved replacement record before removal.
Photograph 1 vpp sin/cos measuring interface, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented high-performance plug-in module and any cooling or discharge provisions while the drive is isolated.
After installation, test encoder, loop response and axis limits. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SN1118-0DJ23-0AA2
- Installed section: Servo control section
- Release check: Test encoder, loop response and axis limits
The Siemens 6SN1118-0DJ23-0AA2 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SN1118-0DJ23-0AA2
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SN1118-0DJ23-0AA2 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size5 × 29 × 48 cm
-
Shipping weight5.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SN1118-0DJ23-0AA2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What operating role does the one-axis 1 Vpp module perform?
6SN1118-0DJ23-0AA2 is used to controls one high-performance servo axis within the documented SIMODRIVE 611 configuration. -
Which voltage requirement applies to the one-axis 1 Vpp module?
Compare SIMODRIVE 611 system class with the installed drive nameplate and controlled Siemens documentation. -
How is the Single-axis channel rating confirmed?
Match the complete 6SN1118-0DJ23-0AA2 article, installed power section and connected semiconductor or motor hardware. -
Which connections identify the one-axis 1 Vpp module?
Record 1 vpp sin/cos measuring interface, cable routing, grounding, board revision and adjacent assemblies before removal. -
How should the servo control section be isolated?
Use site lockout, observe the Siemens discharge time and prove absence of voltage before handling 6SN1118-0DJ23-0AA2. -
What arrival checks apply to the one-axis 1 Vpp module?
Inspect the exact label, connector condition, coating, bent pins, contamination, damage and protective packing. -
Which test releases the one-axis 1 Vpp module to service?
Test encoder, loop response and axis limits. Also record diagnostics and the controlled functional test result. -
What quotation details are required for the one-axis 1 Vpp module?
Send the 6SN1118-0DJ23-0AA2 nameplate, installed drive type, section photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a 6SN1118-0DJ23-0AA2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
