PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOREG
- C98043-A1800-L1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A1800-L1 Thyristor firing interface board
Siemens C98043-A1800-L1 is a Thyristor firing interface board for the SIMOREG DC converter systems. It is used to transfers firing pulses to thyristor bridges. Confirm the exact article, electrical class, interfaces, companion hardware and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete Thyristor firing interface board
ACTUAL APPLICATIONS
Application context for C98043-A1800-L1
Manufacturer documentation places the Thyristor Firing Interface Board in practical drive applications. The three cases below describe different operating tasks in which C98043-A1800-L1 performs its documented product-family role with the configured companion equipment.
-
01 · PLASTICS & PACKAGING
Coordinate form-fill-seal with Thyristor Firing
Inside the film feed, sealing jaws and discharge belts, C98043-A1800-L1 performs its assigned control role as a Thyristor Firing Interface Board. During speed ramp, the system uses this function to correct material position before sealing or cutting, helping it keep seals and cuts aligned with the product. -
02 · AUTOMOTIVE
Control paint-shop conveying with Thyristor Firing
In the automation chain for the carrier tracking and booth interfaces, C98043-A1800-L1 operates in its approved product-family role as a Thyristor Firing Interface Board. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process. -
03 · WATER & WASTEWATER
Verify intake-pump staging with Thyristor Firing
Within the intake pumps, wet-well levels and common headers, C98043-A1800-L1 serves its documented function as a Thyristor Firing Interface Board. During wet-well rise, the system uses this function to bring the next pump into the required speed range, helping it control level without a sudden hydraulic step.
Technical specifications for C98043-A1800-L1
-
Product ModelC98043-A1800-L1
-
Product ParametersThyristor firing interface board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassThyristor firing interface board
-
Drive FamilySIMOREG DC converter systems
-
Primary FunctionTransfers firing pulses to thyristor bridges
-
Power ArchitecturePulse-transformer gate interface
-
Voltage ClassConverter bridge voltage class
-
Current RatingBridge-defined firing channels
-
Control SupplyIsolated gate-control supply
-
Power SectionPower converter firing section
-
Mechanical DesignL1 plug-in interface board
-
Electrical InterfaceGate leads, supply and feedback
-
Cooling IntegrationPower-stack thermal path
-
Board DesignationC98043-A1800-L1 board
-
Service RoleDC-drive firing spare
-
Product StatusSiemens service component
-
Commissioning CheckCheck pulse symmetry and polarity
View all additional
Alternative Names
C98043 A1800 L1
SIMOREG DC converter systems Thyristor firing interface board
Siemens Thyristor firing interface board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match C98043-A1800-L1 to the installed SIMOREG DC converter systems
Siemens C98043-A1800-L1 is a Thyristor firing interface board used in the SIMOREG DC converter systems to transfer firing pulses to thyristor bridges. Its pulse-transformer gate interface architecture must match the documented drive configuration, controlled hardware arrangement and assigned power converter firing section.
Before integration, confirm the converter bridge voltage class, bridge-defined firing channels and isolated gate-control supply. Compare the complete article, l1 plug-in interface board and gate leads, supply and feedback with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented power-stack thermal path, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to check pulse symmetry and polarity, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: C98043-A1800-L1
- Operating role: Transfers firing pulses to thyristor bridges
- Connection class: Gate leads, supply and feedback
The Siemens C98043-A1800-L1 requires documented system integration for its power converter firing section, with the final check pulse symmetry and polarity result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete C98043-A1800-L1 configuration before exchange
Treat C98043-A1800-L1 as a configuration-specific Thyristor firing interface board for the SIMOREG DC converter systems. Match the complete Siemens article identity, C98043-A1800-L1 board, installed hardware revision, dc-drive firing spare and documented power converter firing section before removing the original component.
Photograph the l1 plug-in interface board, gate leads, supply and feedback, cable labels, shielding, protective-earth points and adjacent assemblies. Record the converter bridge voltage class, bridge-defined firing channels and isolated gate-control supply so the replacement can be checked against the controlled drive documentation.
After installation, check pulse symmetry and polarity. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with transfers firing pulses to thyristor bridges at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: C98043-A1800-L1 board
- Interface record: Gate leads, supply and feedback
- Release test: Check pulse symmetry and polarity
The Siemens C98043-A1800-L1 requires documented replacement verification for its power converter firing section, with the final check pulse symmetry and polarity result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for C98043-A1800-L1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens C98043-A1800-L1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 20 × 4 cm
-
Shipping weight0.65 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A1800-L1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which process depends on the A1800-L1 firing board?
The A1800-L1 firing board is used in the documented SIMOREG DC converter systems configuration for transfers firing pulses to thyristor bridges. -
How is a Bridge voltage class mismatch prevented for the A1800-L1 firing board?
For the A1800-L1 firing board, match Converter bridge voltage class and Bridge-defined firing channels to the installed equipment nameplate. -
What control path does the component handle for the A1800-L1 firing board?
The A1800-L1 firing board performs transfers firing pulses to thyristor bridges through the pulse-transformer gate interface. -
Where should the A1800-L1 revision label appear for the A1800-L1 firing board?
For the A1800-L1 firing board, record C98043-A1800-L1 board together with the complete article and installed revision. -
How are gate leads, supply and feedback restored correctly for the A1800-L1 firing board?
On the A1800-L1 firing board, inspect gate leads, supply and feedback for keying, damage, contamination, routing and secure seating. -
What supply symptom can mimic failure for the A1800-L1 firing board?
Before energizing the A1800-L1 firing board, measure isolated gate-control supply and confirm the documented polarity or phase condition. -
Which details are needed before ordering for the A1800-L1 firing board?
A A1800-L1 firing board replacement must match its electrical class, section role, companion hardware and mechanical interface. -
What controlled test follows installation for the A1800-L1 firing board?
For the A1800-L1 firing board, check pulse symmetry and polarity; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a C98043-A1800-L1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
