PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6RY1703-0FA12
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6RY1703-0FA12 TSE capacitor module
Siemens 6RY1703-0FA12 is a TSE capacitor module for the SIMOVERT MASTERDRIVES. It is used to damp converter switching overvoltage. Confirm the exact article, electrical class, interfaces, companion hardware and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete TSE capacitor module
ACTUAL APPLICATIONS
Application context for 6RY1703-0FA12
Manufacturer documentation places the Tse Capacitor Module in practical drive applications. The three cases below describe different operating tasks in which 6RY1703-0FA12 performs its documented product-family role with the configured companion equipment.
-
01 · PULP & PAPER
Maintain paper-machine draws with Tse Capacitor
At the control layer of the press rolls and sectional drives, 6RY1703-0FA12 provides its specified system function as a Tse Capacitor Module. During sheet threading, the system uses this function to maintain speed ratios between machine sections, helping it protect sheet tension during acceleration. -
02 · OIL & GAS
Coordinate pipeline-pump speed with Tse Capacitor
In the automation chain for the mainline pump motors and pressure-control loops, 6RY1703-0FA12 serves its documented function as a Tse Capacitor Module. During throughput change, the system uses this function to change motor speed with the commanded line flow, helping it maintain controlled pipeline pressure. -
03 · AUTOMOTIVE
Sequence powertrain assembly with Tse Capacitor
At the control layer of the machining cells and pallet systems, 6RY1703-0FA12 supports the configured automation role as a Tse Capacitor Module. During quality-hold release, the system uses this function to hand off part identity with the machine sequence, helping it retain traceability at the next operation.
Technical specifications for 6RY1703-0FA12
-
Product Model6RY1703-0FA12
-
Product ParametersTSE capacitor module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassTSE capacitor module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionDamps converter switching overvoltage
-
Power ArchitectureDigital converter electronics
-
Voltage ClassConverter pulse-voltage class
-
Current RatingTransient-energy rating
-
Control SupplyPassive snubber network
-
Power SectionConverter TSE section
-
Mechanical DesignPlug-in service assembly
-
Electrical InterfaceC98043-A7017-L1 terminals
-
Cooling IntegrationCabinet cooling arrangement
-
Board Designation6RY1703-0FA12 assembly
-
Service RoleSiemens service component
-
Product StatusVerify installed revision
-
Commissioning CheckRun diagnostics and functional test
View all additional
Alternative Names
6RY1703 0FA12
SIMOVERT MASTERDRIVES TSE capacitor module
Siemens TSE capacitor module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6RY1703-0FA12 to the installed SIMOVERT MASTERDRIVES
Siemens 6RY1703-0FA12 is a TSE capacitor module used in the SIMOVERT MASTERDRIVES to damp converter switching overvoltage. Its digital converter electronics architecture must match the documented drive configuration, controlled hardware arrangement and assigned converter tse section.
Before integration, confirm the converter pulse-voltage class, transient-energy rating and passive snubber network. Compare the complete article, plug-in service assembly and c98043-a7017-l1 terminals with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented cabinet cooling arrangement, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to run diagnostics and functional test, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6RY1703-0FA12
- Operating role: Damps converter switching overvoltage
- Connection class: C98043-A7017-L1 terminals
The Siemens 6RY1703-0FA12 requires documented system integration for its converter tse section, with the final run diagnostics and functional test result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6RY1703-0FA12 configuration before exchange
Treat 6RY1703-0FA12 as a configuration-specific TSE capacitor module for the SIMOVERT MASTERDRIVES. Match the complete Siemens article identity, 6RY1703-0FA12 assembly, installed hardware revision, siemens service component and documented converter tse section before removing the original component.
Photograph the plug-in service assembly, c98043-a7017-l1 terminals, cable labels, shielding, protective-earth points and adjacent assemblies. Record the converter pulse-voltage class, transient-energy rating and passive snubber network so the replacement can be checked against the controlled drive documentation.
After installation, run diagnostics and functional test. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with damps converter switching overvoltage at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: 6RY1703-0FA12 assembly
- Interface record: C98043-A7017-L1 terminals
- Release test: Run diagnostics and functional test
The Siemens 6RY1703-0FA12 requires documented replacement verification for its converter tse section, with the final run diagnostics and functional test result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6RY1703-0FA12
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6RY1703-0FA12 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28.5 × 4 × 2.5 cm
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6RY1703-0FA12
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What equipment accepts the 0FA12 TSE module?
The 0FA12 TSE module is used in the documented SIMOVERT MASTERDRIVES configuration for damps converter switching overvoltage. -
How should the Converter pulse-voltage class rating be confirmed for the 0FA12 TSE module?
For the 0FA12 TSE module, match Converter pulse-voltage class and Transient-energy rating to the installed equipment nameplate. -
What happens inside the converter tse section for the 0FA12 TSE module?
The 0FA12 TSE module performs damps converter switching overvoltage through the digital converter electronics. -
Which marking separates the 0FA12 TSE module?
For the 0FA12 TSE module, record 6RY1703-0FA12 assembly together with the complete article and installed revision. -
Why must c98043-a7017-l1 terminals be photographed for the 0FA12 TSE module?
On the 0FA12 TSE module, inspect c98043-a7017-l1 terminals for keying, damage, contamination, routing and secure seating. -
What is verified on the passive snubber network for the 0FA12 TSE module?
Before energizing the 0FA12 TSE module, measure passive snubber network and confirm the documented polarity or phase condition. -
When is substitution of the 0FA12 TSE module unsafe?
A 0FA12 TSE module replacement must match its electrical class, section role, companion hardware and mechanical interface. -
Which result completes commissioning for the 0FA12 TSE module?
For the 0FA12 TSE module, run diagnostics and functional test; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6RY1703-0FA12 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
